diff --git a/tools/pyflix/README.md b/tools/pyflix/README.md
index c10c00f..96340a7 100644
--- a/tools/pyflix/README.md
+++ b/tools/pyflix/README.md
@@ -1,8 +1,8 @@
 # Flix Python library
 
-The Flix Python library allows you to remotely connect to a Flix quadcopter. It provides access to telemetry data, supports executing CLI commands, and controlling the drone's flight.
+The Flix Python library allows you to remotely connect to a Flix quadcopter. It provides access to telemetry data, supports executing console commands, and controlling the drone's flight.
 
-To use the library, connect to the drone's Wi-Fi. To use it with the simulator, ensure the script runs on the same local network as the simulator.
+To use the library, connect to the drone's Wi-Fi. To use it with the simulator, ensure the script runs on the same network as the simulator.
 
 ## Installation
 
@@ -30,7 +30,7 @@ flix = Flix()  # create a Flix object and wait for connection
 
 ### Telemetry
 
-Basic telemetry is available through object properties. The properties names generally match the corresponding variables in the firmware itself:
+Basic telemetry is available through object properties. The property names generally match the corresponding variables in the firmware itself:
 
 ```python
 print(flix.connected)       # True if connected to the drone
@@ -41,7 +41,7 @@ print(flix.attitude)        # attitude quaternion [w, x, y, z]
 print(flix.attitude_euler)  # attitude as Euler angles [roll, pitch, yaw]
 print(flix.rates)           # angular rates [roll_rate, pitch_rate, yaw_rate]
 print(flix.channels)        # raw RC channels (list)
-print(flix.motors)          # motors outputs (list)
+print(flix.motors)          # motor outputs (list)
 print(flix.acc)             # accelerometer output (list)
 print(flix.gyro)            # gyroscope output (list)
 ```
@@ -100,17 +100,17 @@ Full list of events:
 |`attitude_euler`|Attitude update|Euler angles (*list*)|
 |`rates`|Angular rates update|Angular rates (*list*)|
 |`channels`|Raw RC channels update|Raw RC channels (*list*)|
-|`motors`|Motors outputs update|Motors outputs (*list*)|
+|`motors`|Motor outputs update|Motor outputs (*list*)|
 |`acc`|Accelerometer update|Accelerometer output (*list*)|
 |`gyro`|Gyroscope update|Gyroscope output (*list*)|
 |`mavlink`|Received MAVLink message|Message object|
 |`mavlink.<message_name>`|Received specific MAVLink message|Message object|
 |`mavlink.<message_id>`|Received specific MAVLink message|Message object|
 |`value`|Named value update (see below)|Name, value|
-|`value.<name>`|Specific named value update (see bellow)|Value|
+|`value.<name>`|Specific named value update (see below)|Value|
 
 > [!NOTE]
-> Update events trigger on every new data from the drone, and do not mean the value has changed.
+> Update events trigger on every new piece of data from the drone, and do not mean the value has changed.
 
 ### Common methods
 
@@ -121,7 +121,7 @@ pitch_p = flix.get_param('PITCH_P')  # get parameter value
 flix.set_param('PITCH_P', 5)         # set parameter value
 ```
 
-Execute console commands using `cli` method. This method returns command response:
+Execute console commands using `cli` method. This method returns the command response:
 
 ```python
 imu = flix.cli('imu')    # get detailed IMU data
@@ -169,10 +169,10 @@ Setting angular rates target:
 flix.set_rates([0.1, 0.2, 0.3], 0.6)  # set target roll rate, pitch rate, yaw rate and thrust
 ```
 
-You also can control raw motors outputs directly:
+You also can control raw motor outputs directly:
 
 ```python
-flix.set_motors([0.5, 0.5, 0.5, 0.5])  # set motors outputs in range [0, 1]
+flix.set_motors([0.5, 0.5, 0.5, 0.5])  # set motor outputs in range [0, 1]
 ```
 
 In *AUTO* mode, the drone will arm automatically if the thrust is greater than zero, and disarm if thrust is zero. Therefore, to disarm the drone, set thrust to zero:
@@ -186,7 +186,7 @@ The following methods are in development and are not functional yet:
 * `set_position` — set target position.
 * `set_velocity` — set target velocity.
 
-To exit from *AUTO* mode move control sticks and the drone will switch to *STAB* mode.
+To exit *AUTO* mode move control sticks and the drone will switch to *STAB* mode.
 
 ## Usage alongside QGroundControl
 
diff --git a/tools/pyflix/flix.py b/tools/pyflix/flix.py
index 2ee9729..f385f5d 100644
--- a/tools/pyflix/flix.py
+++ b/tools/pyflix/flix.py
@@ -17,7 +17,7 @@ from pymavlink.dialects.v20 import common as mavlink
 logger = logging.getLogger('flix')
 if not logger.hasHandlers():
     handler = logging.StreamHandler()
-    handler.setFormatter(logging.Formatter('%(name)s - %(levelname)s - %(message)s'))
+    handler.setFormatter(logging.Formatter('%(name)s: %(message)s'))
     logger.addHandler(handler)
     logger.setLevel(logging.INFO)
 
diff --git a/tools/pyproject.toml b/tools/pyproject.toml
index 673fca6..9c779b8 100644
--- a/tools/pyproject.toml
+++ b/tools/pyproject.toml
@@ -1,6 +1,6 @@
 [project]
 name = "pyflix"
-version = "0.9"
+version = "0.10"
 description = "Python API for Flix drone"
 authors = [{ name="Oleg Kalachev", email="okalachev@gmail.com" }]
 license = "MIT"