From 55655f4f1a6b8461b1f638343f5e1b28ba005e2b Mon Sep 17 00:00:00 2001 From: Oleg Kalachev Date: Tue, 18 Aug 2026 08:27:55 +0300 Subject: [PATCH] Use nicer youtube video previews in the docs --- README.md | 4 ++-- docs/troubleshooting.md | 2 +- docs/usage.md | 2 +- docs/user.md | 6 ++---- 4 files changed, 6 insertions(+), 8 deletions(-) diff --git a/README.md b/README.md index f1bc75e..5708ae1 100644 --- a/README.md +++ b/README.md @@ -53,13 +53,13 @@ The official PCB *(Flix2)* is in development now. Follow the [project's channel] Outdoor flights demo video of the current prototype: - + ### Position control The position control feature is in development. RoboCamp 2026 demo (using an overhead camera, [sources](https://github.com/xTimop/flix-poscontrol/compare/robolager2026...xTimop:flix-poscontrol:poscontrol)): - + ## Simulation diff --git a/docs/troubleshooting.md b/docs/troubleshooting.md index 28af53f..147fbf6 100644 --- a/docs/troubleshooting.md +++ b/docs/troubleshooting.md @@ -28,7 +28,7 @@ Do the following: * **Calibrate the accelerometer.** if is wasn't done before. Type `ca` command in Serial Monitor and follow the instructions. * **Check the attitude estimation**. Connect to the drone using QGroundControl. Rotate the drone in different orientations and check if the attitude estimation is shown exactly as on the video below: - + * **Check the IMU output**. Connect to the drone using QGroundControl on your computer. Go to the *Analyze* tab, *MAVLINK Inspector*. Plot the data from the `SCALED_IMU` message. The gyroscope and accelerometer data should change according to the drone movement. * **Check the motors type**. Motors with exact 3.7V voltage are needed, not ranged working voltage (3.7V — 6V). diff --git a/docs/usage.md b/docs/usage.md index 002a258..e7fbc50 100644 --- a/docs/usage.md +++ b/docs/usage.md @@ -210,7 +210,7 @@ After this setup, you should see the battery voltage in QGroundControl top panel 2. Check the attitude estimation: connect to the drone using QGroundControl, rotate the drone in different orientations and check if the attitude estimation shown in QGroundControl is correct. Compare your attitude indicator (in the *large vertical* mode) to the video: - + 3. Perform motor tests. Use the following commands **— remove the propellers before running the tests!** diff --git a/docs/user.md b/docs/user.md index 20e98a3..51aedd4 100644 --- a/docs/user.md +++ b/docs/user.md @@ -2,8 +2,6 @@ This page contains user-built drones based on the Flix project. Publish your projects into the official Telegram-chat: [@opensourcequadcopterchat](https://t.me/opensourcequadcopterchat) or send materials as a pull request. ---- - ## RoboCamp 2026

@@ -59,7 +57,7 @@ Repository with all the code and PCB sources: https://github.com/Frapais/Sprig-D Detailed video about making the drone: - + --- @@ -191,7 +189,7 @@ RoboCamp took place in July 2025, Saint Petersburg, where 9 participants designe See the detailed video about the event: - + Built drones: