Publish official pre-built binaries

Add qspi and opi psram binaries.
Build binary for Flix2 board.
Add config.h file for defining parameter defaults.
Set appropriate pwm frequency for c3/s3 automatically using config.h.
Remove pid parameters definitions, the may be set is config.h now.

.github/workflows/build.yml

@@ -22,6 +22,12 @@ jobs:
       run: make BOARD=esp32:esp32:esp32c3
     - name: Build firmware for ESP32-S3
       run: make BOARD=esp32:esp32:esp32s3:CDCOnBoot=cdc
+    - name: Build firmware for ESP32-S3 with QSPI PSRAM
+      run: make BOARD=esp32:esp32:esp32s3:CDCOnBoot=cdc,PSRAM=enabled EXTRA=--output-dir=flix/build/esp32.esp32.esp32s3.qspi
+    - name: Build firmware for ESP32-S3 with OPI PSRAM
+      run: make BOARD=esp32:esp32:esp32s3:CDCOnBoot=cdc,PSRAM=opi EXTRA=--output-dir=flix/build/esp32.esp32.esp32s3.opi
+    - name: Build firmware for Flix2
+      run: make BOARD=esp32:esp32:esp32s3:FlashSize=4M,CDCOnBoot=cdc,PSRAM=opi EXTRA='--build-property "compiler.cpp.extra_flags=-DFLIX2" --output-dir=flix/build/esp32.esp32.flix2'
     - name: Upload binaries
       uses: actions/upload-artifact@v4
       with:

.github/workflows/docs.yml

@@ -8,6 +8,7 @@ on:
 
 permissions:
   contents: read
+  actions: read
   pages: write
   id-token: write
 
@@ -30,6 +31,38 @@ jobs:
       run: cargo install mdbook --vers 0.4.43 --locked
     - name: Build book
       run: cd docs && mdbook build
+    - name: Wait for Build to complete
+      uses: lewagon/wait-on-check-action@v1.9.1
+      with:
+        ref: ${{ github.sha }}
+        check-name: build_linux
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        wait-interval: 30
+    - name: Find firmware binaries
+      id: build_run
+      run: |
+        RUN_ID=$(gh api "repos/${{ github.repository }}/actions/workflows/build.yml/runs?head_sha=${{ github.sha }}&per_page=1" --jq '.workflow_runs[0].id')
+        echo "id=$RUN_ID" >> $GITHUB_OUTPUT
+      env:
+        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+    - name: Download firmware binaries
+      uses: actions/download-artifact@v4
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        repository: ${{ github.repository }}
+        run-id: ${{ steps.build_run.outputs.id }}
+        name: firmware-binary
+        path: docs/build
+    - name: Create shortcuts for firmware binaries
+      working-directory: docs/build
+      run: |
+        for FQBN in esp32.esp32.*; do
+          zip -r $FQBN.zip $FQBN
+          BOARD="${FQBN#esp32.esp32.}"
+          ln -s "$FQBN/flix.ino.merged.bin" "flix.$BOARD.merged.bin"
+          ln -s "$FQBN/flix.ino.bin" "flix.$BOARD.bin"
+          ln -s "$FQBN/flix.ino.bootloader.bin" "flix.$BOARD.bootloader.bin"
+        done
     - name: Upload artifact
       uses: actions/upload-pages-artifact@v3
       with:

Makefile

@@ -4,7 +4,7 @@ PORT := $(strip $(wildcard /dev/serial/by-id/usb-Silicon_Labs_CP21* /dev/serial/
 export ARDUINO_NETWORK_CONNECTION_TIMEOUT := 1h
 
 build: .core .libs
-	arduino-cli compile --fqbn $(BOARD) --build-property "build.core_debug_level=1" flix
+	arduino-cli compile --fqbn $(BOARD) --build-property "build.core_debug_level=1" flix $(EXTRA)
 
 upload: build
 	arduino-cli upload --fqbn $(BOARD) -p "$(PORT)" flix

docs/usage.md

@@ -1,20 +1,48 @@
 # Usage: build, setup and flight
 
-To fly Flix quadcopter, you need to build the firmware, upload it to the ESP32 board, and set up the drone for flight.
+To fly Flix quadcopter, you need to upload the firmware to the ESP32 board, and set up the drone for flight.
 
-To get the firmware sources, clone the repository using git:
+## Uploading the firmware
+
+You can either use the **prebuilt binaries** or **build the firmware** from sources — this will let you modify the firmware and add new features.
+
+### Prebuilt binaries (the easiest way)
+
+1. Download the latest firmware file using the following links:
+
+   <!-- markdownlint-disable MD044 -->
+   |Type|Boards|Link|
+   |-|-|-|
+   |ESP32|DevKit, D1 Mini|[`quadcopter.dev/flix.esp32.merged.bin`](https://quadcopter.dev/flix.esp32.merged.bin)|
+   |ESP32-S3|Most S3 based|[`quadcopter.dev/flix.esp32s3.merged.bin`](https://quadcopter.dev/flix.esp32s3.merged.bin)|
+   |ESP32-S3 (2MB PSRAM)|S3 Super Mini, S3 Zero (2MB PSRAM)|[`quadcopter.dev/flix.esp32s3.qspi.merged.bin`](https://quadcopter.dev/flix.esp32s3.qspi.merged.bin)|
+   |ESP32-S3 (8/16MB PSRAM)|S3 Zero (8MB PSRAM)|[`quadcopter.dev/flix.esp32s3.opi.merged.bin`](https://quadcopter.dev/flix.esp32s3.opi.merged.bin)|
+   |ESP32-C3|C3 Super Mini|[`quadcopter.dev/flix.esp32c3.merged.bin`](https://quadcopter.dev/flix.esp32c3.merged.bin)|
+   |Flix2|Flix2 board|[`quadcopter.dev/flix.flix2.merged.bin`](https://quadcopter.dev/flix.flix2.merged.bin)|
+   <!-- markdownlint-enable MD044 -->
+
+2. Flash your ESP32 board using [ESP32 Web Flasher](https://www.espboards.dev/tools/program/):
+
+   <img src="img/web-flasher.png" width="400">
+
+   * Connect the board to your computer, press *Connect to ESP*, choose the serial port.
+   * Go to the *Flash* tab.
+   * Choose the downloaded firmware file, set *Flash address* to *0* (important).
+   * Click *Program* button and wait until the process is finished.
+
+### Building from sources (flexible)
+
+You can build and upload the firmware using either **Arduino IDE** (easier for beginners) or **command line**.
+
+Get the sources using git:
 
 ```bash
 git clone https://github.com/okalachev/flix.git && cd flix
 ```
 
-Beginners can [download the source code as a ZIP archive](https://github.com/okalachev/flix/archive/refs/heads/master.zip).
+Beginners can [download the sources as a ZIP archive](https://github.com/okalachev/flix/archive/refs/heads/master.zip).
 
-## Building the firmware
+#### Arduino IDE (Windows, Linux, macOS)
-
-You can build and upload the firmware using either **Arduino IDE** (easier for beginners) or **command line**.
-
-### Arduino IDE (Windows, Linux, macOS)
 
 <img src="img/arduino-ide.png" width="400" alt="Flix firmware open in Arduino IDE">
 
@@ -29,7 +57,7 @@ You can build and upload the firmware using either **Arduino IDE** (easier for b
 7. Set *Tools* ⇒ *Core Debug Level* to *Error* to see the errors in the serial console. Set *Tools* ⇒ *USB CDC on Boot* to *Enabled* for ESP32-S3/ESP32-C3 boards.
 8. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.
 
-### Command line (Windows, Linux, macOS)
+#### Command line (Windows, Linux, macOS)
 
 1. [Install Arduino CLI](https://arduino.github.io/arduino-cli/installation/).
 
@@ -150,8 +178,6 @@ Before flight you need to calibrate the accelerometer:
 
 If using non-default motor pins, set the pin numbers using the parameters: `MOTOR_PIN_FL`, `MOTOR_PIN_FR`, `MOTOR_PIN_RL`, `MOTOR_PIN_RR` (front-left, front-right, rear-left, rear-right respectively).
 
-Certain ESP32 models (such as ESP32-S3 and ESP32-C3) support a lower maximum PWM frequency; on these boards the parameter `MOT_PWM_FREQ` should be set to 38000 Hz.
-
 #### Brushless motors
 
 If using brushless motors with ESCs:

flix/config.h

@@ -0,0 +1,27 @@
+// Copyright (c) 2026 Oleg Kalachev <okalachev@gmail.com>
+// Repository: https://github.com/okalachev/flix
+
+// Parameter defaults
+
+#pragma once
+
+void setDefaults() {
+	// Set defaults here
+
+	#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3)
+		pwmFrequency = 38000;
+	#endif
+
+	#ifdef FLIX2
+		imuModel = 4; // ICM-40609-D
+		imuIntPin = 10;
+		imuCsPin = 14;
+
+		motorPins[MOTOR_REAR_LEFT] = 41;
+		motorPins[MOTOR_REAR_RIGHT] = 7;
+		motorPins[MOTOR_FRONT_RIGHT] = 18;
+		motorPins[MOTOR_FRONT_LEFT] = 38;
+
+		voltagePin = 3;
+	#endif
+}

flix/control.ino

@@ -9,31 +9,6 @@
 #include "lpf.h"
 #include "util.h"
 
-#define PITCHRATE_P 0.05
-#define PITCHRATE_I 0.2
-#define PITCHRATE_D 0.001
-#define PITCHRATE_I_LIM 0.3
-#define ROLLRATE_P PITCHRATE_P
-#define ROLLRATE_I PITCHRATE_I
-#define ROLLRATE_D PITCHRATE_D
-#define ROLLRATE_I_LIM PITCHRATE_I_LIM
-#define YAWRATE_P 0.3
-#define YAWRATE_I 0.0
-#define YAWRATE_D 0.0
-#define YAWRATE_I_LIM 0.3
-#define ROLL_P 6
-#define ROLL_I 0
-#define ROLL_D 0
-#define PITCH_P ROLL_P
-#define PITCH_I ROLL_I
-#define PITCH_D ROLL_D
-#define YAW_P 3
-#define PITCHRATE_MAX radians(360)
-#define ROLLRATE_MAX radians(360)
-#define YAWRATE_MAX radians(300)
-#define TILT_MAX radians(30)
-#define RATES_D_LPF_ALPHA 0.2 // cutoff frequency ~ 40 Hz
-
 const int RAW = 0, ACRO = 1, STAB = 2, AUTO = 3; // flight modes
 int mode = STAB;
 bool armed = false;
@@ -44,14 +19,14 @@ Vector ratesExtra; // feedforward rates
 Vector torqueTarget;
 float thrustTarget;
 
-PID rollRatePID(ROLLRATE_P, ROLLRATE_I, ROLLRATE_D, ROLLRATE_I_LIM, RATES_D_LPF_ALPHA);
+PID rollRatePID(0.05, 0.2, 0.001, 0.3, 0.2);
-PID pitchRatePID(PITCHRATE_P, PITCHRATE_I, PITCHRATE_D, PITCHRATE_I_LIM, RATES_D_LPF_ALPHA);
+PID pitchRatePID(0.05, 0.2, 0.001, 0.3, 0.2);
-PID yawRatePID(YAWRATE_P, YAWRATE_I, YAWRATE_D);
+PID yawRatePID(0.3, 0, 0, 0.3);
-PID rollPID(ROLL_P, ROLL_I, ROLL_D);
+PID rollPID(6);
-PID pitchPID(PITCH_P, PITCH_I, PITCH_D);
+PID pitchPID(6);
-PID yawPID(YAW_P, 0, 0);
+PID yawPID(3);
-Vector maxRate(ROLLRATE_MAX, PITCHRATE_MAX, YAWRATE_MAX);
+Vector maxRate(radians(360), radians(360), radians(360));
-float tiltMax = TILT_MAX;
+float tiltMax = radians(30);
 int flightModes[] = {STAB, STAB, STAB}; // map for rc mode switch
 
 extern const int MOTOR_REAR_LEFT, MOTOR_REAR_RIGHT, MOTOR_FRONT_RIGHT, MOTOR_FRONT_LEFT;

flix/parameters.ino

@@ -14,6 +14,8 @@ extern float rcLossTimeout, descendTime, disarmTilt;
 extern float voltageScale;
 extern LowPassFilter<float> voltageFilter;
 
+#include "config.h"
+
 Preferences storage;
 
 struct Parameter {
@@ -144,6 +146,7 @@ Parameter parameters[] = {
 
 void setupParameters() {
 	print("Setup parameters\n");
+	setDefaults();
 	storage.begin("flix");
 	// Read parameters from storage
 	for (auto &parameter : parameters) {

flix/pid.h

@@ -18,7 +18,7 @@ public:
 
 	LowPassFilter<float> lpf; // low pass filter for derivative term
 
-	PID(float p, float i, float d, float windup = 0, float dAlpha = 1, float dtMax = 0.1) :
+	PID(float p, float i = 0, float d = 0, float windup = 0, float dAlpha = 1, float dtMax = 0.1) :
 		p(p), i(i), d(d), windup(windup), lpf(dAlpha), dtMax(dtMax) {}
 
 	float update(float error) {