diff --git a/README.md b/README.md
index 5b1635d..d87baf0 100644
--- a/README.md
+++ b/README.md
@@ -65,7 +65,7 @@ See [instructions on running the simulation](docs/build.md).
 |Screws for frame assembly|M1.4x5|<img src="docs/img/screw-m1.4.jpg" height=30 align=center>|4|
 |Frame bottom part|3D printed⁴:<br>[`flix-frame.stl`](docs/assets/flix-frame.stl) [`flix-frame.step`](docs/assets/flix-frame.step)|<img src="docs/img/frame1.jpg" width=100>|1|
 |Frame top part|3D printed:<br>[`esp32-holder.stl`](docs/assets/esp32-holder.stl) [`esp32-holder.step`](docs/assets/esp32-holder.step)|<img src="docs/img/esp32-holder.jpg" width=100>|1|
-|Washer for IMU board mounting|3D printed:<br>[`washer-m3.stl`](docs/assets/washer-m3.stl) [`washer-m3.step`](docs/assets/washer-m3.step)|<img src="docs/img/washer-m3.jpg" width=100>|1|
+|Washer for IMU board mounting|3D printed:<br>[`washer-m3.stl`](docs/assets/washer-m3.stl) [`washer-m3.step`](docs/assets/washer-m3.step)|<img src="docs/img/washer-m3.jpg" width=100>|2|
 |*RC transmitter (optional)*|*KINGKONG TINY X8 or other⁵*|<img src="docs/img/tx.jpg" width=100>|1|
 |*RC receiver (optional)*|*DF500 or other⁵*|<img src="docs/img/rx.jpg" width=100>|1|
 |Wires|28 AWG recommended|<img src="docs/img/wire-28awg.jpg" width=100>||
diff --git a/flix/flix.ino b/flix/flix.ino
index 6933183..d93cf5d 100644
--- a/flix/flix.ino
+++ b/flix/flix.ino
@@ -39,7 +39,6 @@ void setup() {
 #endif
 	setupIMU();
 	setupRC();
-
 	setLED(false);
 	Serial.println("Initializing complete");
 }
diff --git a/flix/wifi.ino b/flix/wifi.ino
index 3572421..5516249 100644
--- a/flix/wifi.ino
+++ b/flix/wifi.ino
@@ -19,7 +19,6 @@ WiFiUDP udp;
 void setupWiFi() {
 	Serial.println("Setup Wi-Fi");
 	WiFi.softAP(WIFI_SSID, WIFI_PASSWORD);
-	IPAddress myIP = WiFi.softAPIP();
 	udp.begin(WIFI_UDP_PORT);
 }