aleks/flix
1
0
Fork 0
mirror of https://github.com/okalachev/flix.git synced 2026-01-11 13:36:43 +00:00
Code Issues Packages Projects Releases Wiki Activity

Include FlixPeriph header instead of MPU9250

Browse Source 
This simplifies choosing IMU model
This commit is contained in:
Oleg Kalachev
2025-10-07 08:41:27 +03:00
parent 5151bb9133
commit e673b50f52
3 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
docs/troubleshooting.md
View File

@@ -15,7 +15,7 @@ Do the following:
* **Check the battery voltage**. Use a multimeter to measure the battery voltage. It should be in range of 3.7-4.2 V.
* **Check if there are some startup errors**. Connect the ESP32 to the computer and check the Serial Monitor output. Use the Reset button to make sure you see the whole ESP32 output.
* **Check the baudrate is correct**. If you see garbage characters in the Serial Monitor, make sure the baudrate is set to 115200.
* **Make sure correct IMU model is chosen**. If using ICM-20948 board, change `MPU9250` to `ICM20948` everywhere in the `imu.ino` file.
* **Make sure correct IMU model is chosen**. If using ICM-20948/MPU-6050 board, change `MPU9250` to `ICM20948`/`MPU6050` in the `imu.ino` file.
* **Check if the CLI is working**. Perform `help` command in Serial Monitor. You should see the list of available commands. You can also access the CLI using QGroundControl (*Vehicle Setup* ⇒ *Analyze Tools* ⇒ *MAVLink Console*).
* **Configure QGroundControl correctly before connecting to the drone** if you use it to control the drone. Go to the settings and enable *Virtual Joystick*. *Auto-Center Throttle* setting **should be disabled**.
* **If QGroundControl doesn't connect**, you might need to disable the firewall and/or VPN on your computer.