Use Serial1 for for rc on esp32-c3

SF_RC_LOSS_TIME - time without rc to activate failsafe.
SD_DESCEND_TIME - total time to decrease the throttle to zero.
Make controlTime nan on the start to simplify the logic.

.github/workflows/build.yml

@@ -25,8 +25,8 @@ jobs:
         path: flix/build
     - name: Build firmware for ESP32-S3
       run: make BOARD=esp32:esp32:esp32s3
-    - name: Build firmware with WiFi disabled
-      run: sed -i 's/^#define WIFI_ENABLED 1$/#define WIFI_ENABLED 0/' flix/flix.ino && make
+    - name: Build firmware for ESP32-C3
+      run: make BOARD=esp32:esp32:esp32c3
     - name: Check c_cpp_properties.json
       run: tools/check_c_cpp_properties.py
 

.markdownlint.json

@@ -7,6 +7,7 @@
 	"MD024": false,
 	"MD033": false,
 	"MD034": false,
+	"MD040": false,
 	"MD059": false,
 	"MD044": {
 		"html_elements": false,

.vscode/c_cpp_properties.json

@@ -6,19 +6,18 @@
 				"${workspaceFolder}/flix",
 				"${workspaceFolder}/gazebo",
 				"${workspaceFolder}/tools/**",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.2.0/libraries/**",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32",
-				"~/.arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/**",
-				"~/.arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/dio_qspi/include",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
+				"~/.arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
 				"~/Arduino/libraries/**",
 				"/usr/include/gazebo-11/",
 				"/usr/include/ignition/math6/"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32/Arduino.h",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32/pins_arduino.h",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
 				"${workspaceFolder}/flix/estimate.ino",
@@ -31,9 +30,10 @@
 				"${workspaceFolder}/flix/rc.ino",
 				"${workspaceFolder}/flix/time.ino",
 				"${workspaceFolder}/flix/wifi.ino",
-				"${workspaceFolder}/flix/parameters.ino"
+				"${workspaceFolder}/flix/parameters.ino",
+				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/.arduino15/packages/esp32/tools/esp-x32/2411/bin/xtensa-esp32-elf-g++",
+			"compilerPath": "~/.arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [
@@ -53,19 +53,18 @@
 			"name": "Mac",
 			"includePath": [
 				"${workspaceFolder}/flix",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.2.0/libraries/**",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32",
-				"~/Library/Arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/include/**",
-				"~/Library/Arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/dio_qspi/include",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
+				"~/Library/Arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
 				"~/Documents/Arduino/libraries/**",
 				"/opt/homebrew/include/gazebo-11/",
 				"/opt/homebrew/include/ignition/math6/"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32/Arduino.h",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32/pins_arduino.h",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/flix.ino",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
@@ -78,9 +77,10 @@
 				"${workspaceFolder}/flix/rc.ino",
 				"${workspaceFolder}/flix/time.ino",
 				"${workspaceFolder}/flix/wifi.ino",
-				"${workspaceFolder}/flix/parameters.ino"
+				"${workspaceFolder}/flix/parameters.ino",
+				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/Library/Arduino15/packages/esp32/tools/esp-x32/2411/bin/xtensa-esp32-elf-g++",
+			"compilerPath": "~/Library/Arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [
@@ -103,17 +103,16 @@
 				"${workspaceFolder}/flix",
 				"${workspaceFolder}/gazebo",
 				"${workspaceFolder}/tools/**",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.2.0/libraries/**",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32",
-				"~/AppData/Local/Arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/**",
-				"~/AppData/Local/Arduino15/packages/esp32/tools/esp32-arduino-libs/idf-release_v5.4-2f7dcd86-v1/esp32/dio_qspi/include",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
+				"~/AppData/Local/Arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
 				"~/Documents/Arduino/libraries/**"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.2.0/cores/esp32/Arduino.h",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.2.0/variants/d1_mini32/pins_arduino.h",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
 				"${workspaceFolder}/flix/estimate.ino",
@@ -126,9 +125,10 @@
 				"${workspaceFolder}/flix/rc.ino",
 				"${workspaceFolder}/flix/time.ino",
 				"${workspaceFolder}/flix/wifi.ino",
-				"${workspaceFolder}/flix/parameters.ino"
+				"${workspaceFolder}/flix/parameters.ino",
+				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/AppData/Local/Arduino15/packages/esp32/tools/esp-x32/2411/bin/xtensa-esp32-elf-g++.exe",
+			"compilerPath": "~/AppData/Local/Arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++.exe",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [

Makefile

@@ -13,10 +13,10 @@ monitor:
 
 dependencies .dependencies:
 	arduino-cli core update-index --config-file arduino-cli.yaml
-	arduino-cli core install esp32:esp32@3.2.0 --config-file arduino-cli.yaml
+	arduino-cli core install esp32:esp32@3.3.6 --config-file arduino-cli.yaml
 	arduino-cli lib update-index
 	arduino-cli lib install "FlixPeriph"
-	arduino-cli lib install "MAVLink"@2.0.16
+	arduino-cli lib install "MAVLink"@2.0.25
 	touch .dependencies
 
 gazebo/build cmake: gazebo/CMakeLists.txt

README.md

@@ -1,6 +1,9 @@
-# Flix
+<!-- markdownlint-disable MD041 -->
 
-**Flix** (*flight + X*) — open source ESP32-based quadcopter made from scratch.
+<p align="center">
+  <img src="docs/img/flix.svg" width=180 alt="Flix logo"><br>
+  <b>Flix</b> (<i>flight + X</i>) — open source ESP32-based quadcopter made from scratch.
+</p>
 
 <table>
   <tr>
@@ -18,15 +21,13 @@
 * Dedicated for education and research.
 * Made from general-purpose components.
 * Simple and clean source code in Arduino (<2k lines firmware).
+* Connectivity using Wi-Fi and MAVLink protocol.
 * Control using USB gamepad, remote control or smartphone.
-* Wi-Fi and MAVLink support.
 * Wireless command line interface and analyzing.
 * Precise simulation with Gazebo.
-* Python library.
+* Python library for scripting and automatic flights.
 * Textbook on flight control theory and practice ([in development](https://quadcopter.dev)).
-* *Position control (using external camera) and autonomous flights¹*.
-
-*¹ — planned.*
+* *Position control (planned)*.
 
 ## It actually flies
 

docs/book/firmware.md

@@ -35,7 +35,7 @@
 
 ### Подсистема управления
 
-Состояние органов управления обрабатывается в функции `interpretControls()` и преобразуется в *команду управления*, которая включает следующее:
+Состояние органов управления обрабатывается в функции `interpretControls()` и преобразуется в **команду управления**, которая включает следующее:
 
 * `attitudeTarget` *(Quaternion)* — целевая ориентация дрона.
 * `ratesTarget` *(Vector)* — целевые угловые скорости, *рад/с*.

docs/book/gyro.md

@@ -87,13 +87,13 @@ Flix поддерживает следующие модели IMU:
 #include <FlixPeriph.h>
 #include <SPI.h>
 
-MPU9250 IMU(SPI);
+MPU9250 imu(SPI);
 
 void setup() {
 	Serial.begin(115200);
-	bool success = IMU.begin();
+	bool success = imu.begin();
 	if (!success) {
-		Serial.println("Failed to initialize IMU");
+		Serial.println("Failed to initialize the IMU");
 	}
 }
 ```
@@ -108,21 +108,21 @@ void setup() {
 #include <FlixPeriph.h>
 #include <SPI.h>
 
-MPU9250 IMU(SPI);
+MPU9250 imu(SPI);
 
 void setup() {
 	Serial.begin(115200);
-	bool success = IMU.begin();
+	bool success = imu.begin();
 	if (!success) {
-		Serial.println("Failed to initialize IMU");
+		Serial.println("Failed to initialize the IMU");
 	}
 }
 
 void loop() {
-	IMU.waitForData();
+	imu.waitForData();
 
 	float gx, gy, gz;
-	IMU.getGyro(gx, gy, gz);
+	imu.getGyro(gx, gy, gz);
 
 	Serial.printf("gx:%f gy:%f gz:%f\n", gx, gy, gz);
 	delay(50); // замедление вывода
@@ -135,36 +135,36 @@ void loop() {
 
 ## Конфигурация гироскопа
 
-В коде Flix настройка IMU происходит в функции `configureIMU`. В этой функции настраиваются три основных параметра гироскопа: диапазон измерений, частота сэмплов и частота LPF-фильтра.
+В коде Flix настройка IMU происходит в функции `configureIMU`. В этой функции настраиваются три основных параметра гироскопа: диапазон измерений, частота сэмплирования и частота LPF-фильтра.
 
-### Частота сэмплов
+### Частота сэмплирования
 
-Большинство IMU могут обновлять данные с разной частотой. В полетных контроллерах обычно используется частота обновления от 500 Гц до 8 кГц. Чем выше частота сэмплов, тем выше точность управления полетом, но и больше нагрузка на микроконтроллер.
+Большинство IMU могут обновлять данные с разной частотой. В полетных контроллерах обычно используется частота обновления от 500 Гц до 8 кГц. Чем выше частота, тем выше точность управления полетом, но и тем больше нагрузка на микроконтроллер.
 
-Частота сэмплов устанавливается методом `setSampleRate()`. В Flix используется частота 1 кГц:
+Частота сэмплирования устанавливается методом `setSampleRate()`. В Flix используется частота 1 кГц:
 
 ```cpp
 IMU.setRate(IMU.RATE_1KHZ_APPROX);
 ```
 
-Поскольку не все поддерживаемые IMU могут работать строго на частоте 1 кГц, в библиотеке FlixPeriph существует возможность приближенной настройки частоты сэмплов. Например, у IMU ICM-20948 при такой настройке реальная частота сэмплирования будет равна 1125 Гц.
+Поскольку не все поддерживаемые IMU могут работать строго на частоте 1 кГц, в библиотеке FlixPeriph существует возможность приближенной настройки частоты сэмплирования. Например, у IMU ICM-20948 при такой настройке реальная частота сэмплирования будет равна 1125 Гц.
 
 Другие доступные для установки в библиотеке FlixPeriph частоты сэмплирования:
 
-* `RATE_MIN` — минимальная частота сэмплов для конкретного IMU.
+* `RATE_MIN` — минимальная частота для конкретного IMU.
 * `RATE_50HZ_APPROX` — значение, близкое к 50 Гц.
 * `RATE_1KHZ_APPROX` — значение, близкое к 1 кГц.
 * `RATE_8KHZ_APPROX` — значение, близкое к 8 кГц.
-* `RATE_MAX` — максимальная частота сэмплов для конкретного IMU.
+* `RATE_MAX` — максимальная частота для конкретного IMU.
 
 #### Диапазон измерений
 
-Большинство MEMS-гироскопов поддерживают несколько диапазонов измерений угловой скорости. Главное преимущество выбора меньшего диапазона — бо́льшая чувствительность. В полетных контроллерах обычно выбирается максимальный диапазон измерений от –2000 до 2000 градусов в секунду, чтобы обеспечить возможность динамичных маневров.
+Большинство MEMS-гироскопов поддерживают несколько диапазонов измерений угловой скорости. Главное преимущество выбора меньшего диапазона — бо́льшая чувствительность. В полетных контроллерах обычно выбирается максимальный диапазон измерений от –2000 до 2000 градусов в секунду, чтобы обеспечить возможность быстрых маневров.
 
 В библиотеке FlixPeriph диапазон измерений гироскопа устанавливается методом `setGyroRange()`:
 
 ```cpp
-IMU.setGyroRange(IMU.GYRO_RANGE_2000DPS);
+imu.setGyroRange(imu.GYRO_RANGE_2000DPS);
 ```
 
 ### LPF-фильтр
@@ -172,7 +172,7 @@ IMU.setGyroRange(IMU.GYRO_RANGE_2000DPS);
 IMU InvenSense могут фильтровать измерения на аппаратном уровне при помощи фильтра нижних частот (LPF). Flix реализует собственный фильтр для гироскопа, чтобы иметь больше гибкости при поддержке разных IMU. Поэтому для встроенного LPF устанавливается максимальная частота среза:
 
 ```cpp
-IMU.setDLPF(IMU.DLPF_MAX);
+imu.setDLPF(imu.DLPF_MAX);
 ```
 
 ## Калибровка гироскопа
@@ -181,7 +181,7 @@ IMU.setDLPF(IMU.DLPF_MAX);
 
 \\[ gyro_{xyz}=rates_{xyz}+bias_{xyz}+noise \\]
 
-Для качественной работы подсистемы оценки ориентации и управления дроном необходимо оценить *bias* гироскопа и учесть его в вычислениях. Для этого при запуске программы производится калибровка гироскопа, которая реализована в функции `calibrateGyro()`. Эта функция считывает данные с гироскопа в состоянии покоя 1000 раз и усредняет их. Полученные значения считаются *bias* гироскопа и в дальнейшем вычитаются из измерений.
+Для точной работы подсистемы оценки ориентации и управления дроном необходимо оценить *bias* гироскопа и учесть его в вычислениях. Для этого при запуске программы производится калибровка гироскопа, которая реализована в функции `calibrateGyro()`. Эта функция считывает данные с гироскопа в состоянии покоя 1000 раз и усредняет их. Полученные значения считаются *bias* гироскопа и в дальнейшем вычитаются из измерений.
 
 Программа для вывода данных с гироскопа с калибровкой:
 
@@ -189,23 +189,23 @@ IMU.setDLPF(IMU.DLPF_MAX);
 #include <FlixPeriph.h>
 #include <SPI.h>
 
-MPU9250 IMU(SPI);
+MPU9250 imu(SPI);
 
 float gyroBiasX, gyroBiasY, gyroBiasZ; // bias гироскопа
 
 void setup() {
 	Serial.begin(115200);
-	bool success = IMU.begin();
+	bool success = imu.begin();
 	if (!success) {
-		Serial.println("Failed to initialize IMU");
+		Serial.println("Failed to initialize the IMU");
 	}
 	calibrateGyro();
 }
 
 void loop() {
 	float gx, gy, gz;
-	IMU.waitForData();
-	IMU.getGyro(gx, gy, gz);
+	imu.waitForData();
+	imu.getGyro(gx, gy, gz);
 
 	// Устранение bias гироскопа
 	gx -= gyroBiasX;
@@ -226,9 +226,9 @@ void calibrateGyro() {
 
 	// Получение 1000 измерений гироскопа
 	for (int i = 0; i < samples; i++) {
-		IMU.waitForData();
+		imu.waitForData();
 		float gx, gy, gz;
-		IMU.getGyro(gx, gy, gz);
+		imu.getGyro(gx, gy, gz);
 		gyroBiasX += gx;
 		gyroBiasY += gy;
 		gyroBiasZ += gz;

docs/firmware.md

@@ -38,13 +38,13 @@ Utility files:
 
 ### Control subsystem
 
-Pilot inputs are interpreted in `interpretControls()`, and then converted to the *control command*, which consists of the following:
+Pilot inputs are interpreted in `interpretControls()`, and then converted to the **control command**, which consists of the following:
 
 * `attitudeTarget` *(Quaternion)* — target attitude of the drone.
 * `ratesTarget` *(Vector)* — target angular rates, *rad/s*.
 * `ratesExtra` *(Vector)* — additional (feed-forward) angular rates, used for yaw rate control in STAB mode, *rad/s*.
 * `torqueTarget` *(Vector)* — target torque, range [-1, 1].
-* `thrustTarget` *(float)* — collective thrust target, range [0, 1].
+* `thrustTarget` *(float)* — collective motor thrust target, range [0, 1].
 
 Control command is handled in `controlAttitude()`, `controlRates()`, `controlTorque()` functions. Each function may be skipped if the corresponding control target is set to `NAN`.
 
@@ -62,6 +62,11 @@ print("Test value: %.2f\n", testValue);
 
 In order to add a console command, modify the `doCommand()` function in `cli.ino` file.
 
+> [!IMPORTANT]
+> Avoid using delays in in-flight commands, it will **crash** the drone! (The design is one-threaded.)
+>
+> For on-the-ground commands, use `pause()` function, instead of `delay()`. This function allows to pause in a way that MAVLink connection will continue working.
+
 ## Building the firmware
 
 See build instructions in [usage.md](usage.md).

docs/img/flix.svg

@@ -0,0 +1,38 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 734.86 378.46">
+  <defs>
+    <style>
+      .a {
+        fill: none;
+        stroke: #d5d5d5;
+        stroke-miterlimit: 10;
+        stroke-width: 31px;
+      }
+
+      .b {
+        fill: #c1c1c1;
+      }
+
+      .c {
+        fill: #ff9400;
+      }
+
+      .d {
+        fill: #d5d5d5;
+      }
+    </style>
+  </defs>
+  <g>
+    <g>
+      <line class="a" x1="448.78" y1="294.23" x2="648.77" y2="93.24"/>
+      <line class="a" x1="449.78" y1="94.24" x2="649.77" y2="295.23"/>
+      <circle class="b" cx="549.27" cy="193.73" r="41.5"/>
+      <circle class="c" cx="449.35" cy="93.74" r="77.95"/>
+      <circle class="c" cx="648.89" cy="93.53" r="77.95"/>
+      <circle class="c" cx="647.89" cy="294.51" r="77.95"/>
+      <circle class="c" cx="448.9" cy="294.51" r="77.95"/>
+    </g>
+    <path class="d" d="M8,161.93q0-17.85,22.36-17.85h4.81V100.57Q35.17,8.49,131.23,8h1q36.87,0,47.31,7.48L181,17.41l1,2.41V50q0,12.32-5.82,12.31-2.43,0-7.4-4.64t-14.19-9a48.63,48.63,0,0,0-21.22-4.41q-12,0-19.17,3.5a18.85,18.85,0,0,0-9.82,10.62,67.35,67.35,0,0,0-3.52,12.06,82.52,82.52,0,0,0-.85,13.39v60.32h27.28q10.86,0,16.05,5.43a17.52,17.52,0,0,1,5.19,12.42,22.5,22.5,0,0,1-1.21,7.36q-1.22,3.51-6.64,7.24t-14.36,3.74H101.64V344.82a56,56,0,0,1-.61,9.65,37.8,37.8,0,0,1-2.56,7.6,11.83,11.83,0,0,1-6.94,6.4q-5,1.93-13.51,1.93H57.08q-10.47,0-15.7-4.71t-5.73-8.44a77.31,77.31,0,0,1-.48-9.53V180.27H29.4Q8,180.27,8,161.93Z"/>
+    <path class="d" d="M201.21,348.2V37q0-23.16,20.86-23.4h22.81q22.8,0,22.8,22.44V346.27a68.92,68.92,0,0,1-.49,9.41,22.59,22.59,0,0,1-2.42,7.12,11.48,11.48,0,0,1-6.67,5.43,47.78,47.78,0,0,1-12.74,2.17H225q-11.4,0-17.58-4.47T201.21,348.2Z"/>
+    <path class="d" d="M284.9,61.08V36.47a40.39,40.39,0,0,1,1.7-12.91,11.36,11.36,0,0,1,6.18-7,25.27,25.27,0,0,1,6.68-2.3c1.45-.15,4-.4,7.76-.72h25.23q10.43,0,16.73,4.7t6.31,18.22V62.05a27.94,27.94,0,0,1-.85,7.11,23,23,0,0,1-2.06,5.43,20,20,0,0,1-2.91,4,10,10,0,0,1-3.52,2.54c-1.21.48-2.54,1-4,1.44a11.53,11.53,0,0,1-3.4.73,13.71,13.71,0,0,0-3.15.48H307.7q-10.43,0-16.61-4.7T284.9,61.08Zm1.94,284.71V166.28q0-22.2,21.83-22.2h20.38q10.92,0,16.62,4t6.67,8.45a60.47,60.47,0,0,1,1,12.18V348.2q0,22.2-21.83,22.2H308.67q-10.43,0-15.64-4.95t-5.7-8.81A90.93,90.93,0,0,1,286.84,345.79Z"/>
+  </g>
+</svg>

docs/troubleshooting.md

@@ -4,7 +4,7 @@
 
 Do the following:
 
-* **Check ESP32 core is installed**. Check if the version matches the one used in the [tutorial](usage.md#firmware).
+* **Check ESP32 core is installed**. Check if the version matches the one used in the [tutorial](usage.md#building-the-firmware).
 * **Check libraries**. Install all the required libraries from the tutorial. Make sure there are no MPU9250 or other peripherals libraries that may conflict with the ones used in the tutorial.
 * **Check the chosen board**. The correct board to choose in Arduino IDE for ESP32 Mini is *WEMOS D1 MINI ESP32*.
 
@@ -25,7 +25,7 @@ Do the following:
   * The `accel` and `gyro` fields should change as you move the drone.
 * **Calibrate the accelerometer.** if is wasn't done before. Type `ca` command in Serial Monitor and follow the instructions.
 * **Check the attitude estimation**. Connect to the drone using QGroundControl. Rotate the drone in different orientations and check if the attitude estimation shown in QGroundControl is correct.
-* **Check the IMU orientation is set correctly**. If the attitude estimation is rotated, make sure `rotateIMU` function is defined correctly in `imu.ino` file.
+* **Check the IMU orientation is set correctly**. If the attitude estimation is rotated, set the correct IMU orientation as described in the [tutorial](usage.md#define-imu-orientation).
 * **Check the motors type**. Motors with exact 3.7V voltage are needed, not ranged working voltage (3.7V — 6V).
 * **Check the motors**. Perform the following commands using Serial Monitor:
   * `mfr` — should rotate front right motor (counter-clockwise).

docs/usage.md

@@ -20,10 +20,10 @@ You can build and upload the firmware using either **Arduino IDE** (easier for b
 
 1. Install [Arduino IDE](https://www.arduino.cc/en/software) (version 2 is recommended).
 2. *Windows users might need to install [USB to UART bridge driver from Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).*
-3. Install ESP32 core, version 3.2.0. See the [official Espressif's instructions](https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html#installing-using-arduino-ide) on installing ESP32 Core in Arduino IDE.
+3. Install ESP32 core, version 3.3.6. See the [official Espressif's instructions](https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html#installing-using-arduino-ide) on installing ESP32 Core in Arduino IDE.
 4. Install the following libraries using [Library Manager](https://docs.arduino.cc/software/ide-v2/tutorials/ide-v2-installing-a-library):
    * `FlixPeriph`, the latest version.
-   * `MAVLink`, version 2.0.16.
+   * `MAVLink`, version 2.0.25.
 5. Open the `flix/flix.ino` sketch from downloaded firmware sources in Arduino IDE.
 6. Connect your ESP32 board to the computer and choose correct board type in Arduino IDE (*WEMOS D1 MINI ESP32* for ESP32 Mini) and the port.
 7. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.
@@ -80,7 +80,7 @@ QGroundControl is a ground control station software that can be used to monitor
 1. Install mobile or desktop version of [QGroundControl](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html).
 2. Power up the drone.
 3. Connect your computer or smartphone to the appeared `flix` Wi-Fi network (password: `flixwifi`).
-4. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically
+4. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.
 
 ### Access console
 
@@ -108,11 +108,13 @@ The drone is configured using parameters. To access and modify them, go to the Q
 
 <img src="img/parameters.png" width="400">
 
+You can also work with parameters using `p` command in the console. Parameter names are case-insensitive.
+
 ### Define IMU orientation
 
 Use parameters, to define the IMU board axes orientation relative to the drone's axes: `IMU_ROT_ROLL`, `IMU_ROT_PITCH`, and `IMU_ROT_YAW`.
 
-The drone has *X* axis pointing forward, *Y* axis pointing left, and *Z* axis pointing up, and the supported IMU boards have *X* axis pointing to the pins side and *Z* axis pointing up from the side with the components:
+The drone has *X* axis pointing forward, *Y* axis pointing left, and *Z* axis pointing up, and the supported IMU boards have *X* axis pointing to the pins side and *Z* axis pointing up from the component side:
 
 <img src="img/imu-axes.png" width="200">
 
@@ -120,10 +122,10 @@ Use the following table to set the parameters for common IMU orientations:
 
 |Orientation|Parameters|Orientation|Parameters|
 |:-:|-|-|-|
-|<img src="img/imu-rot-1.png" width="200">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0    |<img src="img/imu-rot-5.png" width="200">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0|
-|<img src="img/imu-rot-2.png" width="200">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|<img src="img/imu-rot-6.png" width="200">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|
-|<img src="img/imu-rot-3.png" width="200">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|<img src="img/imu-rot-7.png" width="200">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|
-|<img src="img/imu-rot-4.png" width="200"><br>☑️ **Default**|<br>`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|<img src="img/imu-rot-8.png" width="200">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|
+|<img src="img/imu-rot-1.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0    |<img src="img/imu-rot-5.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0|
+|<img src="img/imu-rot-2.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|<img src="img/imu-rot-6.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|
+|<img src="img/imu-rot-3.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|<img src="img/imu-rot-7.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|
+|<img src="img/imu-rot-4.png" width="180"><br>☑️ **Default**|<br>`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|<img src="img/imu-rot-8.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|
 
 ### Calibrate accelerometer
 
@@ -141,9 +143,9 @@ Before flight you need to calibrate the accelerometer:
    * The `accel` and `gyro` fields should change as you move the drone.
    * The `landed` field should be `1` when the drone is still on the ground and `0` when you lift it up.
 
-2. Check the attitude estimation: connect to the drone using QGroundControl, rotate the drone in different orientations and check if the attitude estimation shown in QGroundControl is correct. Attitude indicator in QGroundControl is shown below:
+2. Check the attitude estimation: connect to the drone using QGroundControl, rotate the drone in different orientations and check if the attitude estimation shown in QGroundControl is correct. Compare your attitude indicator (in the *large vertical* mode) to the video:
 
-   <img src="img/qgc-attitude.png" height="200">
+    <a href="https://youtu.be/yVRN23-GISU"><img width=300 src="https://i3.ytimg.com/vi/yVRN23-GISU/maxresdefault.jpg"></a>
 
 3. Perform motor tests in the console. Use the following commands **— remove the propellers before running the tests!**
 
@@ -152,6 +154,10 @@ Before flight you need to calibrate the accelerometer:
    * `mrl` — should rotate rear left motor (counter-clockwise).
    * `mrr` — should rotate rear right motor (clockwise).
 
+   Rotation diagram:
+
+   <img src="img/motors.svg" width=200>
+
 > [!WARNING]
 > Never run the motors when powering the drone from USB, always use the battery for that.
 
@@ -159,7 +165,7 @@ Before flight you need to calibrate the accelerometer:
 
 There are several ways to control the drone's flight: using **smartphone** (Wi-Fi), using **SBUS remote control**, or using **USB remote control** (Wi-Fi).
 
-### Control with smartphone
+### Control with a smartphone
 
 1. Install [QGroundControl mobile app](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html#android) on your smartphone.
 2. Power the drone using the battery.
@@ -171,7 +177,7 @@ There are several ways to control the drone's flight: using **smartphone** (Wi-F
 > [!TIP]
 > Decrease `CTL_TILT_MAX` parameter when flying using the smartphone to make the controls less sensitive.
 
-### Control with remote control
+### Control with a remote control
 
 Before using remote SBUS-connected remote control, you need to calibrate it:
 
@@ -179,7 +185,7 @@ Before using remote SBUS-connected remote control, you need to calibrate it:
 2. Type `cr` command and follow the instructions.
 3. Use the remote control to fly the drone!
 
-### Control with USB remote control
+### Control with a USB remote control
 
 If your drone doesn't have RC receiver installed, you can use USB remote control and QGroundControl app to fly it.
 
@@ -237,11 +243,43 @@ In this mode, the pilot inputs are ignored (except the mode switch, if configure
 
 If the pilot moves the control sticks, the drone will switch back to *STAB* mode.
 
-<img src="img/parameters.png" width="400">
+## Wi-Fi configuration
+
+You can configure the Wi-Fi using parameters and console commands.
+
+The Wi-Fi mode is chosen using `WIFI_MODE` parameter in QGroundControl or in the console:
+
+* `0` — Wi-Fi is disabled.
+* `1` — Access Point mode (*AP*) — the drone creates a Wi-Fi network.
+* `2` — Client mode (*STA*) — the drone connects to an existing Wi-Fi network.
+* `3` — *ESP-NOW (not implemented yet)*.
+
+> [!WARNING]
+> Tests showed that Client mode may cause **additional delays** in remote control (due to retranslations), so it's generally not recommended.
+
+The SSID and password are configured using the `ap` and `sta` console commands:
+
+```
+ap <ssid> <password>
+sta <ssid> <password>
+```
+
+Example of configuring the Access Point mode:
+
+```
+ap my-flix-ssid mypassword123
+p WIFI_MODE 1
+```
+
+Disabling Wi-Fi:
+
+```
+p WIFI_MODE 0
+```
 
 ## Flight log
 
-After the flight, you can download the flight log for analysis wirelessly. Use the following for that:
+After the flight, you can download the flight log for analysis wirelessly. Use the following command on your computer for that:
 
 ```bash
 make log

docs/user.md

@@ -16,7 +16,7 @@ Author: [goldarte](https://t.me/goldarte).<br>
 
 ## School 548 course
 
-Special quadcopter design and engineering course took place in october-november 2025 in School 548, Moscow. Course included UAV control theory, electronics, and practical drone assembly and setup using the Flix project.
+Special course on quadcopter design and engineering took place in october-november 2025 in School 548, Moscow. The course included UAV control theory, electronics, drone assembly and setup practice, using the Flix project.
 
 <img height=200 src="img/user/school548/1.jpg"> <img height=200 src="img/user/school548/2.jpg"> <img height=200 src="img/user/school548/3.jpg">
 
@@ -25,7 +25,7 @@ STL files and other materials: see [here](https://drive.google.com/drive/folders
 ### Selected works
 
 Author: [KiraFlux](https://t.me/@kiraflux_0XC0000005).<br>
-Description: **custom ESPNOW remote control** is implemented, firmware modified to support ESPNOW protocol.<br>
+Description: **custom ESPNOW remote control** was implemented, modified firmware to support ESPNOW protocol.<br>
 Telegram posts: [1](https://t.me/opensourcequadcopter/106), [2](https://t.me/opensourcequadcopter/114).<br>
 Modified Flix firmware: https://github.com/KiraFlux/flix/tree/klyax.<br>
 Remote control project: https://github.com/KiraFlux/ESP32-DJC.<br>

flix/cli.ino

@@ -11,7 +11,7 @@ extern const int MOTOR_REAR_LEFT, MOTOR_REAR_RIGHT, MOTOR_FRONT_RIGHT, MOTOR_FRO
 extern const int RAW, ACRO, STAB, AUTO;
 extern float t, dt, loopRate;
 extern uint16_t channels[16];
-extern float controlRoll, controlPitch, controlThrottle, controlYaw, controlMode;
+extern float controlTime;
 extern int mode;
 extern bool armed;
 
@@ -38,11 +38,12 @@ const char* motd =
 "raw/stab/acro/auto - set mode\n"
 "rc - show RC data\n"
 "wifi - show Wi-Fi info\n"
+"ap <ssid> <password> - setup Wi-Fi access point\n"
+"sta <ssid> <password> - setup Wi-Fi client mode\n"
 "mot - show motor output\n"
 "log [dump] - print log header [and data]\n"
 "cr - calibrate RC\n"
 "ca - calibrate accel\n"
-"cl - calibrate level\n"
 "mfr, mfl, mrr, mrl - test motor (remove props)\n"
 "sys - show system info\n"
 "reset - reset drone's state\n"
@@ -55,9 +56,7 @@ void print(const char* format, ...) {
 	vsnprintf(buf, sizeof(buf), format, args);
 	va_end(args);
 	Serial.print(buf);
-#if WIFI_ENABLED
 	mavlinkPrint(buf);
-#endif
 }
 
 void pause(float duration) {
@@ -65,9 +64,7 @@ void pause(float duration) {
 	while (t - start < duration) {
 		step();
 		handleInput();
-#if WIFI_ENABLED
 		processMavlink();
-#endif
 		delay(50);
 	}
 }
@@ -133,12 +130,15 @@ void doCommand(String str, bool echo = false) {
 		}
 		print("\nroll: %g pitch: %g yaw: %g throttle: %g mode: %g\n",
 			controlRoll, controlPitch, controlYaw, controlThrottle, controlMode);
+		print("time: %.1f\n", controlTime);
 		print("mode: %s\n", getModeName());
 		print("armed: %d\n", armed);
 	} else if (command == "wifi") {
-#if WIFI_ENABLED
 		printWiFiInfo();
-#endif
+	} else if (command == "ap") {
+		configWiFi(true, arg0.c_str(), arg1.c_str());
+	} else if (command == "sta") {
+		configWiFi(false, arg0.c_str(), arg1.c_str());
 	} else if (command == "mot") {
 		print("front-right %g front-left %g rear-right %g rear-left %g\n",
 			motors[MOTOR_FRONT_RIGHT], motors[MOTOR_FRONT_LEFT], motors[MOTOR_REAR_RIGHT], motors[MOTOR_REAR_LEFT]);

flix/control.ino

@@ -38,6 +38,12 @@ const int RAW = 0, ACRO = 1, STAB = 2, AUTO = 3; // flight modes
 int mode = STAB;
 bool armed = false;
 
+Quaternion attitudeTarget;
+Vector ratesTarget;
+Vector ratesExtra; // feedforward rates
+Vector torqueTarget;
+float thrustTarget;
+
 PID rollRatePID(ROLLRATE_P, ROLLRATE_I, ROLLRATE_D, ROLLRATE_I_LIM, RATES_D_LPF_ALPHA);
 PID pitchRatePID(PITCHRATE_P, PITCHRATE_I, PITCHRATE_D, PITCHRATE_I_LIM, RATES_D_LPF_ALPHA);
 PID yawRatePID(YAWRATE_P, YAWRATE_I, YAWRATE_D);
@@ -47,12 +53,6 @@ PID yawPID(YAW_P, 0, 0);
 Vector maxRate(ROLLRATE_MAX, PITCHRATE_MAX, YAWRATE_MAX);
 float tiltMax = TILT_MAX;
 
-Quaternion attitudeTarget;
-Vector ratesTarget;
-Vector ratesExtra; // feedforward rates
-Vector torqueTarget;
-float thrustTarget;
-
 extern const int MOTOR_REAR_LEFT, MOTOR_REAR_RIGHT, MOTOR_FRONT_RIGHT, MOTOR_FRONT_LEFT;
 extern float controlRoll, controlPitch, controlThrottle, controlYaw, controlMode;
 

flix/estimate.ino

@@ -8,6 +8,10 @@
 #include "lpf.h"
 #include "util.h"
 
+Vector rates; // estimated angular rates, rad/s
+Quaternion attitude; // estimated attitude
+bool landed;
+
 float accWeight = 0.003;
 LowPassFilter<Vector> ratesFilter(0.2); // cutoff frequency ~ 40 Hz
 

flix/flix.ino

@@ -7,18 +7,14 @@
 #include "quaternion.h"
 #include "util.h"
 
-#define WIFI_ENABLED 1
 
-float t = NAN; // current step time, s
-float dt; // time delta from previous step, s
-float controlRoll, controlPitch, controlYaw, controlThrottle; // pilot's inputs, range [-1, 1]
-float controlMode = NAN;
-Vector gyro; // gyroscope data
-Vector acc; // accelerometer data, m/s/s
-Vector rates; // filtered angular rates, rad/s
-Quaternion attitude; // estimated attitude
-bool landed; // are we landed and stationary
-float motors[4]; // normalized motors thrust in range [0..1]
+extern float t, dt;
+extern float controlRoll, controlPitch, controlYaw, controlThrottle, controlMode;
+extern Vector gyro, acc;
+extern Vector rates;
+extern Quaternion attitude;
+extern bool landed;
+extern float motors[4];
 
 void setup() {
 	Serial.begin(115200);
@@ -28,9 +24,7 @@ void setup() {
 	setupLED();
 	setupMotors();
 	setLED(true);
-#if WIFI_ENABLED
 	setupWiFi();
-#endif
 	setupIMU();
 	setupRC();
 	setLED(false);
@@ -45,9 +39,7 @@ void loop() {
 	control();
 	sendMotors();
 	handleInput();
-#if WIFI_ENABLED
 	processMavlink();
-#endif
 	logData();
 	syncParameters();
 }

flix/imu.ino

@@ -12,9 +12,12 @@
 MPU9250 imu(SPI);
 Vector imuRotation(0, 0, -PI / 2); // imu orientation as Euler angles
 
+Vector gyro; // gyroscope output, rad/s
+Vector gyroBias;
+
+Vector acc; // accelerometer output, m/s/s
 Vector accBias;
 Vector accScale(1, 1, 1);
-Vector gyroBias;
 
 void setupIMU() {
 	print("Setup IMU\n");
@@ -44,14 +47,6 @@ void readIMU() {
 	gyro = Quaternion::rotateVector(gyro, rotation.inversed());
 }
 
-void calibrateLevel() {
-	print("Place perfectly level [1 sec]\n");
-	pause(1);
-	Quaternion correction = Quaternion::fromBetweenVectors(Quaternion::rotateVector(Vector(0, 0, 1), attitude), Vector(0, 0, 1));
-	imuRotation = Quaternion::rotate(correction, Quaternion::fromEuler(imuRotation)).toEuler();
-	print("✓ Done: %.3f %.3f %.3f\n", degrees(imuRotation.x), degrees(imuRotation.y), degrees(imuRotation.z));
-}
-
 void calibrateGyroOnce() {
 	static Delay landedDelay(2);
 	if (!landedDelay.update(landed)) return; // calibrate only if definitely stationary

flix/mavlink.ino

@@ -3,20 +3,16 @@
 
 // MAVLink communication
 
-#if WIFI_ENABLED
-
 #include <MAVLink.h>
 #include "util.h"
 
-#define SYSTEM_ID 1
-#define MAVLINK_RATE_SLOW 1
-#define MAVLINK_RATE_FAST 10
+extern float controlTime;
 
 bool mavlinkConnected = false;
 String mavlinkPrintBuffer;
-
-extern float controlTime;
-extern float controlRoll, controlPitch, controlThrottle, controlYaw, controlMode;
+int mavlinkSysId = 1;
+Rate telemetryFast(10);
+Rate telemetrySlow(2);
 
 void processMavlink() {
 	sendMavlink();
@@ -29,10 +25,8 @@ void sendMavlink() {
 	mavlink_message_t msg;
 	uint32_t time = t * 1000;
 
-	static Rate slow(MAVLINK_RATE_SLOW), fast(MAVLINK_RATE_FAST);
-
-	if (slow) {
-		mavlink_msg_heartbeat_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, MAV_TYPE_QUADROTOR, MAV_AUTOPILOT_GENERIC,
+	if (telemetrySlow) {
+		mavlink_msg_heartbeat_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, MAV_TYPE_QUADROTOR, MAV_AUTOPILOT_GENERIC,
 			(armed ? MAV_MODE_FLAG_SAFETY_ARMED : 0) |
 			((mode == STAB) ? MAV_MODE_FLAG_STABILIZE_ENABLED : 0) |
 			((mode == AUTO) ? MAV_MODE_FLAG_AUTO_ENABLED : MAV_MODE_FLAG_MANUAL_INPUT_ENABLED),
@@ -41,27 +35,27 @@ void sendMavlink() {
 
 		if (!mavlinkConnected) return; // send only heartbeat until connected
 
-		mavlink_msg_extended_sys_state_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+		mavlink_msg_extended_sys_state_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			MAV_VTOL_STATE_UNDEFINED, landed ? MAV_LANDED_STATE_ON_GROUND : MAV_LANDED_STATE_IN_AIR);
 		sendMessage(&msg);
 	}
 
-	if (fast && mavlinkConnected) {
+	if (telemetryFast && mavlinkConnected) {
 		const float zeroQuat[] = {0, 0, 0, 0};
-		mavlink_msg_attitude_quaternion_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+		mavlink_msg_attitude_quaternion_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			time, attitude.w, attitude.x, -attitude.y, -attitude.z, rates.x, -rates.y, -rates.z, zeroQuat); // convert to frd
 		sendMessage(&msg);
 
-		mavlink_msg_rc_channels_raw_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, controlTime * 1000, 0,
+		mavlink_msg_rc_channels_raw_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, controlTime * 1000, 0,
 			channels[0], channels[1], channels[2], channels[3], channels[4], channels[5], channels[6], channels[7], UINT8_MAX);
 		if (channels[0] != 0) sendMessage(&msg); // 0 means no RC input
 
 		float controls[8];
 		memcpy(controls, motors, sizeof(motors));
-		mavlink_msg_actuator_control_target_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, time, 0, controls);
+		mavlink_msg_actuator_control_target_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, time, 0, controls);
 		sendMessage(&msg);
 
-		mavlink_msg_scaled_imu_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, time,
+		mavlink_msg_scaled_imu_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, time,
 			acc.x * 1000, -acc.y * 1000, -acc.z * 1000, // convert to frd
 			gyro.x * 1000, -gyro.y * 1000, -gyro.z * 1000,
 			0, 0, 0, 0);
@@ -96,7 +90,7 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_MANUAL_CONTROL) {
 		mavlink_manual_control_t m;
 		mavlink_msg_manual_control_decode(&msg, &m);
-		if (m.target && m.target != SYSTEM_ID) return; // 0 is broadcast
+		if (m.target && m.target != mavlinkSysId) return; // 0 is broadcast
 
 		controlThrottle = m.z / 1000.0f;
 		controlPitch = m.x / 1000.0f;
@@ -109,11 +103,11 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_PARAM_REQUEST_LIST) {
 		mavlink_param_request_list_t m;
 		mavlink_msg_param_request_list_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		mavlink_message_t msg;
 		for (int i = 0; i < parametersCount(); i++) {
-			mavlink_msg_param_value_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+			mavlink_msg_param_value_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 				getParameterName(i), getParameter(i), MAV_PARAM_TYPE_REAL32, parametersCount(), i);
 			sendMessage(&msg);
 		}
@@ -122,7 +116,7 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_PARAM_REQUEST_READ) {
 		mavlink_param_request_read_t m;
 		mavlink_msg_param_request_read_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		char name[MAVLINK_MSG_PARAM_REQUEST_READ_FIELD_PARAM_ID_LEN + 1];
 		strlcpy(name, m.param_id, sizeof(name)); // param_id might be not null-terminated
@@ -131,7 +125,7 @@ void handleMavlink(const void *_msg) {
 			memcpy(name, getParameterName(m.param_index), 16);
 		}
 		mavlink_message_t msg;
-		mavlink_msg_param_value_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+		mavlink_msg_param_value_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			name, value, MAV_PARAM_TYPE_REAL32, parametersCount(), m.param_index);
 		sendMessage(&msg);
 	}
@@ -139,14 +133,15 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_PARAM_SET) {
 		mavlink_param_set_t m;
 		mavlink_msg_param_set_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		char name[MAVLINK_MSG_PARAM_SET_FIELD_PARAM_ID_LEN + 1];
 		strlcpy(name, m.param_id, sizeof(name)); // param_id might be not null-terminated
-		setParameter(name, m.param_value);
+		bool success = setParameter(name, m.param_value);
+		if (!success) return;
 		// send ack
 		mavlink_message_t msg;
-		mavlink_msg_param_value_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+		mavlink_msg_param_value_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			m.param_id, m.param_value, MAV_PARAM_TYPE_REAL32, parametersCount(), 0); // index is unknown
 		sendMessage(&msg);
 	}
@@ -154,17 +149,17 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_MISSION_REQUEST_LIST) { // handle to make qgc happy
 		mavlink_mission_request_list_t m;
 		mavlink_msg_mission_request_list_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		mavlink_message_t msg;
-		mavlink_msg_mission_count_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, 0, 0, 0, MAV_MISSION_TYPE_MISSION, 0);
+		mavlink_msg_mission_count_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, 0, 0, 0, MAV_MISSION_TYPE_MISSION, 0);
 		sendMessage(&msg);
 	}
 
 	if (msg.msgid == MAVLINK_MSG_ID_SERIAL_CONTROL) {
 		mavlink_serial_control_t m;
 		mavlink_msg_serial_control_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		char data[MAVLINK_MSG_SERIAL_CONTROL_FIELD_DATA_LEN + 1];
 		strlcpy(data, (const char *)m.data, m.count); // data might be not null-terminated
@@ -176,7 +171,7 @@ void handleMavlink(const void *_msg) {
 
 		mavlink_set_attitude_target_t m;
 		mavlink_msg_set_attitude_target_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		// copy attitude, rates and thrust targets
 		ratesTarget.x = m.body_roll_rate;
@@ -198,7 +193,7 @@ void handleMavlink(const void *_msg) {
 
 		mavlink_set_actuator_control_target_t m;
 		mavlink_msg_set_actuator_control_target_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		attitudeTarget.invalidate();
 		ratesTarget.invalidate();
@@ -210,12 +205,12 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_LOG_REQUEST_DATA) {
 		mavlink_log_request_data_t m;
 		mavlink_msg_log_request_data_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 
 		// Send all log records
 		for (int i = 0; i < sizeof(logBuffer) / sizeof(logBuffer[0]); i++) {
 			mavlink_message_t msg;
-			mavlink_msg_log_data_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg, 0, i,
+			mavlink_msg_log_data_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, 0, i,
 				sizeof(logBuffer[0]), (uint8_t *)logBuffer[i]);
 			sendMessage(&msg);
 		}
@@ -225,13 +220,13 @@ void handleMavlink(const void *_msg) {
 	if (msg.msgid == MAVLINK_MSG_ID_COMMAND_LONG) {
 		mavlink_command_long_t m;
 		mavlink_msg_command_long_decode(&msg, &m);
-		if (m.target_system && m.target_system != SYSTEM_ID) return;
+		if (m.target_system && m.target_system != mavlinkSysId) return;
 		mavlink_message_t response;
 		bool accepted = false;
 
 		if (m.command == MAV_CMD_REQUEST_MESSAGE && m.param1 == MAVLINK_MSG_ID_AUTOPILOT_VERSION) {
 			accepted = true;
-			mavlink_msg_autopilot_version_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &response,
+			mavlink_msg_autopilot_version_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &response,
 				MAV_PROTOCOL_CAPABILITY_PARAM_FLOAT | MAV_PROTOCOL_CAPABILITY_MAVLINK2, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0);
 			sendMessage(&response);
 		}
@@ -250,7 +245,7 @@ void handleMavlink(const void *_msg) {
 
 		// send command ack
 		mavlink_message_t ack;
-		mavlink_msg_command_ack_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &ack, m.command, accepted ? MAV_RESULT_ACCEPTED : MAV_RESULT_UNSUPPORTED, UINT8_MAX, 0, msg.sysid, msg.compid);
+		mavlink_msg_command_ack_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &ack, m.command, accepted ? MAV_RESULT_ACCEPTED : MAV_RESULT_UNSUPPORTED, UINT8_MAX, 0, msg.sysid, msg.compid);
 		sendMessage(&ack);
 	}
 }
@@ -267,7 +262,7 @@ void sendMavlinkPrint() {
 		char data[MAVLINK_MSG_SERIAL_CONTROL_FIELD_DATA_LEN + 1];
 		strlcpy(data, str + i, sizeof(data));
 		mavlink_message_t msg;
-		mavlink_msg_serial_control_pack(SYSTEM_ID, MAV_COMP_ID_AUTOPILOT1, &msg,
+		mavlink_msg_serial_control_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			SERIAL_CONTROL_DEV_SHELL,
 			i + MAVLINK_MSG_SERIAL_CONTROL_FIELD_DATA_LEN < strlen(str) ? SERIAL_CONTROL_FLAG_MULTI : 0, // more chunks to go
 			0, 0, strlen(data), (uint8_t *)data, 0, 0);
@@ -275,5 +270,3 @@ void sendMavlinkPrint() {
 	}
 	mavlinkPrintBuffer.clear();
 }
-
-#endif

flix/motors.ino

@@ -17,7 +17,8 @@
 #define PWM_MIN 0
 #define PWM_MAX 1000000 / PWM_FREQUENCY
 
-// Motors array indexes:
+float motors[4]; // normalized motor thrusts in range [0..1]
+
 const int MOTOR_REAR_LEFT = 0;
 const int MOTOR_REAR_RIGHT = 1;
 const int MOTOR_FRONT_RIGHT = 2;

flix/parameters.ino

@@ -9,13 +9,20 @@
 extern float channelZero[16];
 extern float channelMax[16];
 extern float rollChannel, pitchChannel, throttleChannel, yawChannel, armedChannel, modeChannel;
+extern int wifiMode, udpLocalPort, udpRemotePort;
+extern float rcLossTimeout, descendTime;
 
 Preferences storage;
 
 struct Parameter {
 	const char *name; // max length is 15 (Preferences key limit)
-	float *variable;
-	float value; // cache
+	bool integer;
+	union { float *f; int *i; }; // pointer to variable
+	float cache; // what's stored in flash
+	Parameter(const char *name, float *variable) : name(name), integer(false), f(variable) {};
+	Parameter(const char *name, int *variable) : name(name), integer(true), i(variable) {};
+	float getValue() const { return integer ? *i : *f; };
+	void setValue(const float value) { if (integer) *i = value; else *f = value; };
 };
 
 Parameter parameters[] = {
@@ -77,6 +84,17 @@ Parameter parameters[] = {
 	{"RC_THROTTLE", &throttleChannel},
 	{"RC_YAW", &yawChannel},
 	{"RC_MODE", &modeChannel},
+	// wifi
+	{"WIFI_MODE", &wifiMode},
+	{"WIFI_LOC_PORT", &udpLocalPort},
+	{"WIFI_REM_PORT", &udpRemotePort},
+	// mavlink
+	{"MAV_SYS_ID", &mavlinkSysId},
+	{"MAV_RATE_SLOW", &telemetrySlow.rate},
+	{"MAV_RATE_FAST", &telemetryFast.rate},
+	// safety
+	{"SF_RC_LOSS_TIME", &rcLossTimeout},
+	{"SF_DESCEND_TIME", &descendTime},
 };
 
 void setupParameters() {
@@ -84,10 +102,10 @@ void setupParameters() {
 	// Read parameters from storage
 	for (auto &parameter : parameters) {
 		if (!storage.isKey(parameter.name)) {
-			storage.putFloat(parameter.name, *parameter.variable);
+			storage.putFloat(parameter.name, parameter.getValue()); // store default value
 		}
-		*parameter.variable = storage.getFloat(parameter.name, *parameter.variable);
-		parameter.value = *parameter.variable;
+		parameter.setValue(storage.getFloat(parameter.name, 0));
+		parameter.cache = parameter.getValue();
 	}
 }
 
@@ -102,13 +120,13 @@ const char *getParameterName(int index) {
 
 float getParameter(int index) {
 	if (index < 0 || index >= parametersCount()) return NAN;
-	return *parameters[index].variable;
+	return parameters[index].getValue();
 }
 
 float getParameter(const char *name) {
 	for (auto &parameter : parameters) {
-		if (strcmp(parameter.name, name) == 0) {
-			return *parameter.variable;
+		if (strcasecmp(parameter.name, name) == 0) {
+			return parameter.getValue();
 		}
 	}
 	return NAN;
@@ -116,8 +134,9 @@ float getParameter(const char *name) {
 
 bool setParameter(const char *name, const float value) {
 	for (auto &parameter : parameters) {
-		if (strcmp(parameter.name, name) == 0) {
-			*parameter.variable = value;
+		if (strcasecmp(parameter.name, name) == 0) {
+			if (parameter.integer && !isfinite(value)) return false; // can't set integer to NaN or Inf
+			parameter.setValue(value);
 			return true;
 		}
 	}
@@ -130,16 +149,18 @@ void syncParameters() {
 	if (motorsActive()) return; // don't use flash while flying, it may cause a delay
 
 	for (auto &parameter : parameters) {
-		if (parameter.value == *parameter.variable) continue;
-		if (isnan(parameter.value) && isnan(*parameter.variable)) continue; // handle NAN != NAN
-		storage.putFloat(parameter.name, *parameter.variable);
-		parameter.value = *parameter.variable;
+		if (parameter.getValue() == parameter.cache) continue; // no change
+		if (isnan(parameter.getValue()) && isnan(parameter.cache)) continue; // both are NaN
+		if (isinf(parameter.getValue()) && isinf(parameter.cache)) continue; // both are Inf
+
+		storage.putFloat(parameter.name, parameter.getValue());
+		parameter.cache = parameter.getValue(); // update cache
 	}
 }
 
 void printParameters() {
 	for (auto &parameter : parameters) {
-		print("%s = %g\n", parameter.name, *parameter.variable);
+		print("%s = %g\n", parameter.name, parameter.getValue());
 	}
 }
 

flix/rc.ino

@@ -6,14 +6,21 @@
 #include <SBUS.h>
 #include "util.h"
 
-SBUS rc(Serial2); // NOTE: Use RC(Serial2, 16, 17) if you use the old UART2 pins
+#ifdef ESP32C3
+SBUS rc(Serial1);
+#else
+SBUS rc(Serial2);
+#endif
 
 uint16_t channels[16]; // raw rc channels
-float controlTime; // time of the last controls update
 float channelZero[16]; // calibration zero values
 float channelMax[16]; // calibration max values
 
-// Channels mapping (using float to store in parameters):
+float controlRoll, controlPitch, controlYaw, controlThrottle; // pilot's inputs, range [-1, 1]
+float controlMode = NAN;
+float controlTime = NAN; // time of the last controls update
+
+// Channels mapping (nan means not assigned):
 float rollChannel = NAN, pitchChannel = NAN, throttleChannel = NAN, yawChannel = NAN, modeChannel = NAN;
 
 void setupRC() {
@@ -38,11 +45,11 @@ void normalizeRC() {
 		controls[i] = mapf(channels[i], channelZero[i], channelMax[i], 0, 1);
 	}
 	// Update control values
-	controlRoll = rollChannel >= 0 ? controls[(int)rollChannel] : NAN;
-	controlPitch = pitchChannel >= 0 ? controls[(int)pitchChannel] : NAN;
-	controlYaw = yawChannel >= 0 ? controls[(int)yawChannel] : NAN;
-	controlThrottle = throttleChannel >= 0 ? controls[(int)throttleChannel] : NAN;
-	controlMode = modeChannel >= 0 ? controls[(int)modeChannel] : NAN;
+	controlRoll = rollChannel >= 0 ? controls[(int)rollChannel] : 0;
+	controlPitch = pitchChannel >= 0 ? controls[(int)pitchChannel] : 0;
+	controlYaw = yawChannel >= 0 ? controls[(int)yawChannel] : 0;
+	controlThrottle = throttleChannel >= 0 ? controls[(int)throttleChannel] : 0;
+	controlMode = modeChannel >= 0 ? controls[(int)modeChannel] : NAN; // mode switch should not have affect if not set
 }
 
 void calibrateRC() {

flix/safety.ino

@@ -3,12 +3,12 @@
 
 // Fail-safe functions
 
-#define RC_LOSS_TIMEOUT 1
-#define DESCEND_TIME 10
-
 extern float controlTime;
 extern float controlRoll, controlPitch, controlThrottle, controlYaw;
 
+float rcLossTimeout = 1;
+float descendTime = 10;
+
 void failsafe() {
 	rcLossFailsafe();
 	autoFailsafe();
@@ -16,9 +16,8 @@ void failsafe() {
 
 // RC loss failsafe
 void rcLossFailsafe() {
-	if (controlTime == 0) return; // no RC at all
 	if (!armed) return;
-	if (t - controlTime > RC_LOSS_TIMEOUT) {
+	if (t - controlTime > rcLossTimeout) {
 		descend();
 	}
 }
@@ -27,7 +26,7 @@ void rcLossFailsafe() {
 void descend() {
 	mode = AUTO;
 	attitudeTarget = Quaternion();
-	thrustTarget -= dt / DESCEND_TIME;
+	thrustTarget -= dt / descendTime;
 	if (thrustTarget < 0) {
 		thrustTarget = 0;
 		armed = false;

flix/time.ino

@@ -3,6 +3,8 @@
 
 // Time related functions
 
+float t = NAN; // current time, s
+float dt; // time delta with the previous step, s
 float loopRate; // Hz
 
 void step() {

flix/vector.h

@@ -35,7 +35,6 @@ public:
 		z = NAN;
 	}
 
-
 	float norm() const {
 		return sqrt(x * x + y * y + z * z);
 	}

flix/wifi.ino

@@ -1,49 +1,76 @@
 // Copyright (c) 2023 Oleg Kalachev <okalachev@gmail.com>
 // Repository: https://github.com/okalachev/flix
 
-// Wi-Fi support
-
-#if WIFI_ENABLED
+// Wi-Fi communication
 
 #include <WiFi.h>
 #include <WiFiAP.h>
 #include <WiFiUdp.h>
+#include "Preferences.h"
 
-#define WIFI_SSID "flix"
-#define WIFI_PASSWORD "flixwifi"
-#define WIFI_UDP_PORT 14550
-#define WIFI_UDP_REMOTE_PORT 14550
-#define WIFI_UDP_REMOTE_ADDR "255.255.255.255"
+extern Preferences storage; // use the main preferences storage
+
+const int W_DISABLED = 0, W_AP = 1, W_STA = 2;
+int wifiMode = W_AP;
+int udpLocalPort = 14550;
+int udpRemotePort = 14550;
+IPAddress udpRemoteIP = "255.255.255.255";
 
 WiFiUDP udp;
 
 void setupWiFi() {
 	print("Setup Wi-Fi\n");
-	WiFi.softAP(WIFI_SSID, WIFI_PASSWORD);
-	udp.begin(WIFI_UDP_PORT);
+	if (wifiMode == W_AP) {
+		WiFi.softAP(storage.getString("WIFI_AP_SSID", "flix").c_str(), storage.getString("WIFI_AP_PASS", "flixwifi").c_str());
+	} else if (wifiMode == W_STA) {
+		WiFi.begin(storage.getString("WIFI_STA_SSID", "").c_str(), storage.getString("WIFI_STA_PASS", "").c_str());
+	}
+	udp.begin(udpLocalPort);
 }
 
 void sendWiFi(const uint8_t *buf, int len) {
-	if (WiFi.softAPIP() == IPAddress(0, 0, 0, 0) && WiFi.status() != WL_CONNECTED) return;
-	udp.beginPacket(udp.remoteIP() ? udp.remoteIP() : WIFI_UDP_REMOTE_ADDR, WIFI_UDP_REMOTE_PORT);
+	if (WiFi.softAPgetStationNum() == 0 && !WiFi.isConnected()) return;
+	udp.beginPacket(udpRemoteIP, udpRemotePort);
 	udp.write(buf, len);
 	udp.endPacket();
 }
 
 int receiveWiFi(uint8_t *buf, int len) {
 	udp.parsePacket();
+	if (udp.remoteIP()) udpRemoteIP = udp.remoteIP();
 	return udp.read(buf, len);
 }
 
 void printWiFiInfo() {
+	if (WiFi.getMode() == WIFI_MODE_AP) {
+		print("Mode: Access Point (AP)\n");
 		print("MAC: %s\n", WiFi.softAPmacAddress().c_str());
 		print("SSID: %s\n", WiFi.softAPSSID().c_str());
-	print("Password: %s\n", WIFI_PASSWORD);
+		print("Password: ***\n");
 		print("Clients: %d\n", WiFi.softAPgetStationNum());
-	print("Status: %d\n", WiFi.status());
 		print("IP: %s\n", WiFi.softAPIP().toString().c_str());
-	print("Remote IP: %s\n", udp.remoteIP().toString().c_str());
+	} else if (WiFi.getMode() == WIFI_MODE_STA) {
+		print("Mode: Client (STA)\n");
+		print("Connected: %d\n", WiFi.isConnected());
+		print("MAC: %s\n", WiFi.macAddress().c_str());
+		print("SSID: %s\n", WiFi.SSID().c_str());
+		print("Password: ***\n");
+		print("IP: %s\n", WiFi.localIP().toString().c_str());
+	} else {
+		print("Mode: Disabled\n");
+		return;
+	}
+	print("Remote IP: %s\n", udpRemoteIP.toString().c_str());
 	print("MAVLink connected: %d\n", mavlinkConnected);
 }
 
-#endif
+void configWiFi(bool ap, const char *ssid, const char *password) {
+	if (ap) {
+		storage.putString("WIFI_AP_SSID", ssid);
+		storage.putString("WIFI_AP_PASS", password);
+	} else {
+		storage.putString("WIFI_STA_SSID", ssid);
+		storage.putString("WIFI_STA_PASS", password);
+	}
+	print("✓ Reboot to apply new settings\n");
+}

gazebo/flix.h

@@ -10,19 +10,15 @@
 #include "Arduino.h"
 #include "wifi.h"
 
-#define WIFI_ENABLED 1
+extern float t, dt;
+extern float controlRoll, controlPitch, controlYaw, controlThrottle, controlMode;
+extern Vector rates;
+extern Quaternion attitude;
+extern bool landed;
+extern float motors[4];
 
-float t = NAN;
-float dt;
-float motors[4];
-float controlRoll, controlPitch, controlYaw, controlThrottle = NAN;
-float controlMode = NAN;
-Vector acc;
-Vector gyro;
-Vector rates;
-Quaternion attitude;
-bool landed;
-Vector imuRotation;
+Vector gyro, acc, imuRotation;
+Vector accBias, gyroBias, accScale(1, 1, 1);
 
 // declarations
 void step();
@@ -75,4 +71,4 @@ void calibrateAccel() { print("Skip accel calibrating\n"); };
 void printIMUCalibration() { print("cal: N/A\n"); };
 void printIMUInfo() {};
 void printWiFiInfo() {};
-Vector accBias, gyroBias, accScale(1, 1, 1);
+void configWiFi(bool, const char*, const char*) { print("Skip WiFi config\n"); };

tools/log.py

@@ -43,6 +43,7 @@ records = [record for record in records if record[0] != 0]
 
 print(f'Received records: {len(records)}')
 
+os.makedirs(f'{DIR}/log', exist_ok=True)
 log = open(f'{DIR}/log/{datetime.datetime.now().isoformat()}.csv', 'wb')
 log.write(header.encode() + b'\n')
 for record in records:

tools/pyflix/README.md

@@ -95,7 +95,7 @@ Full list of events:
 |`armed`|Armed state update|Armed state (*bool*)|
 |`mode`|Flight mode update|Flight mode (*str*)|
 |`landed`|Landed state update|Landed state (*bool*)|
-|`print`|The drone sends text to the console|Text|
+|`print`|The drone prints text to the console|Text|
 |`attitude`|Attitude update|Attitude quaternion (*list*)|
 |`attitude_euler`|Attitude update|Euler angles (*list*)|
 |`rates`|Angular rates update|Angular rates (*list*)|
@@ -112,7 +112,7 @@ Full list of events:
 > [!NOTE]
 > Update events trigger on every new piece of data from the drone, and do not mean the value has changed.
 
-### Common methods
+### Basic methods
 
 Get and set firmware parameters using `get_param` and `set_param` methods: