aleks/hoverboard-sideboard-hack-GD
1
0
Fork 0
mirror of https://github.com/EFeru/hoverboard-sideboard-hack-GD.git synced 2026-02-17 15:41:08 +00:00
Code Issues Packages Projects Releases Wiki Activity

Major UART communication improvement

Browse Source 
- the UART communication is improved based on UART Idle line detection interrupt
- both Tx and Rx are efficiently handled using DMA

Other:
- minor visual improvements
This commit is contained in:
EmanuelFeru
2020-06-21 23:07:01 +02:00
parent e9d74bea29
commit 1e7bf7cd90
11 changed files with 312 additions and 183 deletions
Download Patch File Download Diff File Expand all files Collapse all files

69
Inc/config.h
View File

@@ -27,60 +27,61 @@
// Ubuntu: define the desired build variant here if you want to use make in console
// or use VARIANT environment variable for example like "make -e VARIANT=VARIANT_DEBUG". Select only one at a time.
#if !defined(PLATFORMIO)
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
#endif
/* ==================================== DO NOT TOUCH SETTINGS ==================================== */
#define MPU6050 // [-] Define IMU sensor type
#define MPU_GYRO_FSR 2000 // [deg/s] Set Gyroscope Full Scale Range: 250 deg/s, 500 deg/s, 1000 deg/s, 2000 deg/s. !! DMP sensor fusion works only with 2000 deg/s !!
#define MPU_ACCEL_FSR 2 // [g] Set Acceleromenter Full Scale Range: 2g, 4g, 8g, 16g. !! DMP sensor fusion works only with 2g !!
#define MPU_I2C_SPEED 400000 // [bit/s] Define I2C speed for communicating with the MPU6050
#define DELAY_IN_MAIN_LOOP 1 // [ms] Delay in the main loop
// #define PRINTF_FLOAT_SUPPORT // [-] Uncomment this for printf to support float on Serial Debug. It will increase code size! Better to avoid it!
#define MPU6050 // [-] Define IMU sensor type
#define MPU_GYRO_FSR 2000 // [deg/s] Set Gyroscope Full Scale Range: 250 deg/s, 500 deg/s, 1000 deg/s, 2000 deg/s. !! DMP sensor fusion works only with 2000 deg/s !!
#define MPU_ACCEL_FSR 2 // [g] Set Acceleromenter Full Scale Range: 2g, 4g, 8g, 16g. !! DMP sensor fusion works only with 2g !!
#define MPU_I2C_SPEED 400000 // [bit/s] Define I2C speed for communicating with the MPU6050
#define DELAY_IN_MAIN_LOOP 1 // [ms] Delay in the main loop
// #define PRINTF_FLOAT_SUPPORT // [-] Uncomment this for printf to support float on Serial Debug. It will increase code size! Better to avoid it!
/* =============================================================================================== */
/* ==================================== SETTINGS MPU-6050 ==================================== */
#define MPU_SENSOR_ENABLE // [-] Enable flag for MPU-6050 sensor. Comment-out this flag to Disable the MPU sensor and reduce code size.
#define MPU_DMP_ENABLE // [-] Enable flag for MPU-6050 DMP (Digital Motion Processing) functionality.
#define MPU_DEFAULT_HZ 20 // [Hz] Default MPU frequecy: must be between 1Hz and 200Hz.
#define TEMP_READ_MS 500 // [ms] Temperature read time interval
#define PEDO_READ_MS 1000 // [ms] Pedometer read time interval
// #define USE_CAL_HW_REGISTERS // [-] Uncommnent this to SAVE the sensor calibration to the MPU-6050 registers after the Self-test was run
#define MPU_DMP_ENABLE // [-] Enable flag for MPU-6050 DMP (Digital Motion Processing) functionality.
#define MPU_DEFAULT_HZ 20 // [Hz] Default MPU frequecy: must be between 1Hz and 200Hz.
#define TEMP_READ_MS 500 // [ms] Temperature read time interval
#define PEDO_READ_MS 1000 // [ms] Pedometer read time interval
// #define USE_CAL_HW_REGISTERS // [-] Uncommnent this to SAVE the sensor calibration to the MPU-6050 registers after the Self-test was run
// DMP Tap Detection Settings
#define DMP_TAP_AXES TAP_XYZ // [-] Set which axes will register a tap: TAP_XYZ, TAP_X, TAP_Y, TAP_Z
#define DMP_TAP_THRESH 250 // [mg/ms] Set tap threshold for the selected axis.
#define DMP_TAP_COUNT 1 // [-] Set minimum number of taps needed for an interrupt. Minimum consecutive taps: 1 to 4
#define DMP_TAP_TIME 100 // [ms] Set time length between valid taps.
#define DMP_TAP_TIME_MULTI 500 // [ms] Set max time between taps to register as a multi-tap.
#define DMP_SHAKE_REJECT_THRESH 200 // [deg/s] Set shake rejection threshold in degree per second (dps). If the DMP detects a gyro sample larger than the thresh, taps are rejected.
#define DMP_SHAKE_REJECT_TIME 40 // [ms] Set shake rejection time. Sets the length of time that the gyro must be outside of the DMP_SHAKE_REJECT_THRESH before taps are rejected. A mandatory 60 ms is added to this parameter.
#define DMP_SHAKE_REJECT_TIMEOUT 10 // [ms] Set shake rejection timeout. Sets the length of time after a shake rejection that the gyro must stay inside of the threshold before taps can be detected again. A mandatory 60 ms is added to this parameter.
#define DMP_TAP_AXES TAP_XYZ // [-] Set which axes will register a tap: TAP_XYZ, TAP_X, TAP_Y, TAP_Z
#define DMP_TAP_THRESH 250 // [mg/ms] Set tap threshold for the selected axis.
#define DMP_TAP_COUNT 1 // [-] Set minimum number of taps needed for an interrupt. Minimum consecutive taps: 1 to 4
#define DMP_TAP_TIME 100 // [ms] Set time length between valid taps.
#define DMP_TAP_TIME_MULTI 500 // [ms] Set max time between taps to register as a multi-tap.
#define DMP_SHAKE_REJECT_THRESH 200 // [deg/s] Set shake rejection threshold in degree per second (dps). If the DMP detects a gyro sample larger than the thresh, taps are rejected.
#define DMP_SHAKE_REJECT_TIME 40 // [ms] Set shake rejection time. Sets the length of time that the gyro must be outside of the DMP_SHAKE_REJECT_THRESH before taps are rejected. A mandatory 60 ms is added to this parameter.
#define DMP_SHAKE_REJECT_TIMEOUT 10 // [ms] Set shake rejection timeout. Sets the length of time after a shake rejection that the gyro must stay inside of the threshold before taps can be detected again. A mandatory 60 ms is added to this parameter.
/* ==================================== SETTINGS USART ==================================== */
#if defined(VARIANT_DEBUG)
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#elif defined(VARIANT_HOVERBOARD)
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#endif
#define USART_MAIN_BAUD 38400 // [bit/s] MAIN Serial Tx/Rx baud rate
#define SERIAL_START_FRAME 0xABCD // [-] Start frame definition for reliable serial communication
#define SERIAL_TIMEOUT 800 // [-] Numer of wrong received data for Serial timeout detection
#define USART_MAIN_BAUD 38400 // [bit/s] MAIN Serial Tx/Rx baud rate
#define SERIAL_START_FRAME 0xABCD // [-] Start frame definition for reliable serial communication
#define SERIAL_TIMEOUT 500 // [-] Number of wrong received data for Serial timeout detection. Depends on DELAY_IN_MAIN_LOOP
#define SERIAL_BUFFER_SIZE 64 // [bytes] Size of Serial Rx buffer. Make sure it is always larger than the 'Feedback' structure size
/* ==================================== SETTINGS AUX ==================================== */
// #define AUX45_USE_GPIO // [-] Use AUX4, AUX5 as GPIO ports
// #define AUX45_USE_I2C // [-] Use AUX4, AUX5 as I2C port
#define AUX45_USE_USART // [-] Use AUX4, AUX5 as USART port
// #define AUX45_USE_GPIO // [-] Use AUX4, AUX5 as GPIO ports
// #define AUX45_USE_I2C // [-] Use AUX4, AUX5 as I2C port
#define AUX45_USE_USART // [-] Use AUX4, AUX5 as USART port
#ifdef AUX45_USE_USART
#define USART_AUX_BAUD 38400 // [bit/s] AUX Serial Tx/Rx baud rate
#define USART_AUX_BAUD 38400 // [bit/s] AUX Serial Tx/Rx baud rate
#endif
#ifdef AUX45_USE_I2C
#define AUX_I2C_SPEED 100000 // [bit/s] Define I2C speed for communicating via AUX45 wires
#define AUX_I2C_SPEED 100000 // [bit/s] Define I2C speed for communicating via AUX45 wires
#endif
@@ -89,6 +90,10 @@
#error SERIAL_DEBUG and SERIAL_CONTROL not allowed. It is on the same cable.
#endif
#if defined(SERIAL_DEBUG) && defined(SERIAL_FEEDBACK)
#error SERIAL_DEBUG and SERIAL_FEEDBACK not allowed. It is on the same cable.
#endif
#if defined(AUX45_USE_GPIO) && (defined(AUX45_USE_USART) || defined(AUX45_USE_I2C)) || (defined(AUX45_USE_USART) && defined(AUX45_USE_I2C))
#error AUX45_USE_(GPIO,USART,I2C) not allowed in the same time. It is on the same cable.
#endif