mirror of
https://github.com/EFeru/hoverboard-sideboard-hack-GD.git
synced 2026-02-18 08:01:12 +00:00
Initial commit
This commit is contained in:
EmanuelFeru
@@ -0,0 +1,47 @@
|
||||
/*!
|
||||
\file gd32f1x0_libopt.h
|
||||
\brief library optional for gd32f1x0
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright (C) 2017 GigaDevice
|
||||
|
||||
2014-12-26, V1.0.0, platform GD32F1x0(x=3,5)
|
||||
2016-01-15, V2.0.0, platform GD32F1x0(x=3,5,7,9)
|
||||
2016-04-30, V3.0.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
2017-06-19, V3.1.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
*/
|
||||
|
||||
#ifndef GD32F1X0_LIBOPT_H
|
||||
#define GD32F1X0_LIBOPT_H
|
||||
|
||||
#include "gd32f1x0_adc.h"
|
||||
#include "gd32f1x0_cec.h"
|
||||
#include "gd32f1x0_crc.h"
|
||||
#include "gd32f1x0_cmp.h"
|
||||
#include "gd32f1x0_dac.h"
|
||||
#include "gd32f1x0_dbg.h"
|
||||
#include "gd32f1x0_dma.h"
|
||||
#include "gd32f1x0_exti.h"
|
||||
#include "gd32f1x0_fmc.h"
|
||||
#include "gd32f1x0_gpio.h"
|
||||
#include "gd32f1x0_syscfg.h"
|
||||
#include "gd32f1x0_i2c.h"
|
||||
#include "gd32f1x0_fwdgt.h"
|
||||
#include "gd32f1x0_pmu.h"
|
||||
#include "gd32f1x0_rcu.h"
|
||||
#include "gd32f1x0_rtc.h"
|
||||
#include "gd32f1x0_spi.h"
|
||||
#include "gd32f1x0_timer.h"
|
||||
#include "gd32f1x0_usart.h"
|
||||
#include "gd32f1x0_wwdgt.h"
|
||||
#include "gd32f1x0_misc.h"
|
||||
#include "gd32f1x0_tsi.h"
|
||||
#ifdef GD32F170_190
|
||||
#include "gd32f1x0_slcd.h"
|
||||
#include "gd32f1x0_opa.h"
|
||||
#include "gd32f1x0_ivref.h"
|
||||
#include "gd32f1x0_can.h"
|
||||
#endif /* GD32F170_190 */
|
||||
|
||||
#endif /* GD32F1X0_LIBOPT_H */
|
||||
@@ -0,0 +1,94 @@
|
||||
/*!
|
||||
\file main.c
|
||||
\brief TIMER1 oc toggle demo
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright (C) 2017 GigaDevice
|
||||
|
||||
2014-12-26, V1.0.0, platform GD32F1x0(x=3,5)
|
||||
2016-01-15, V2.0.0, platform GD32F1x0(x=3,5,7,9)
|
||||
2016-04-30, V3.0.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
2017-06-19, V3.1.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
*/
|
||||
|
||||
#include "gd32f1x0.h"
|
||||
#include <stdio.h>
|
||||
#include "gd32f1x0_eval.h"
|
||||
|
||||
void gpio_config(void);
|
||||
void timer_config(void);
|
||||
|
||||
/**
|
||||
\brief configure the GPIO ports
|
||||
\param[in] none
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void gpio_config(void)
|
||||
{
|
||||
rcu_periph_clock_enable(RCU_GPIOB);
|
||||
|
||||
/* configure PB3(TIMER1 CH1) as alternate function*/
|
||||
gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_3);
|
||||
gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_3);
|
||||
|
||||
gpio_af_set(GPIOB, GPIO_AF_2, GPIO_PIN_3);
|
||||
}
|
||||
|
||||
/**
|
||||
\brief configure the timer peripheral
|
||||
\param[in] none
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void timer_config(void)
|
||||
{
|
||||
/* ---------------------------------------------------------------------------
|
||||
TIMER1 configuration: output compare toggle mode:
|
||||
TIMER1CLK = systemcoreclock / 3600 = 20K,
|
||||
CH1 update rate = TIMER1 counter clock / CH1VAL = 20000/4000 = 5 Hz
|
||||
----------------------------------------------------------------------------*/
|
||||
timer_oc_parameter_struct timer_ocintpara;
|
||||
timer_parameter_struct timer_initpara;
|
||||
|
||||
rcu_periph_clock_enable(RCU_TIMER1);
|
||||
|
||||
timer_deinit(TIMER1);
|
||||
|
||||
/* TIMER1 configuration */
|
||||
timer_initpara.prescaler = 3599;
|
||||
timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
|
||||
timer_initpara.counterdirection = TIMER_COUNTER_UP;
|
||||
timer_initpara.period = 3999;
|
||||
timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
|
||||
timer_initpara.repetitioncounter = 0;
|
||||
timer_init(TIMER1,&timer_initpara);
|
||||
|
||||
/* CH1 configuration in OC TOGGLE mode */
|
||||
timer_ocintpara.ocpolarity = TIMER_OC_POLARITY_HIGH;
|
||||
timer_ocintpara.outputstate = TIMER_CCX_ENABLE;
|
||||
timer_channel_output_config(TIMER1, TIMER_CH_1, &timer_ocintpara);
|
||||
|
||||
timer_channel_output_pulse_value_config(TIMER1, TIMER_CH_1, 3999);
|
||||
timer_channel_output_mode_config(TIMER1, TIMER_CH_1, TIMER_OC_MODE_TOGGLE);
|
||||
timer_channel_output_shadow_config(TIMER1, TIMER_CH_1, TIMER_OC_SHADOW_DISABLE);
|
||||
|
||||
/* auto-reload preload enable */
|
||||
timer_auto_reload_shadow_enable(TIMER1);
|
||||
timer_enable(TIMER1);
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief main function
|
||||
\param[in] none
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
gpio_config();
|
||||
timer_config();
|
||||
|
||||
while (1);
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
/*!
|
||||
\file readme.txt
|
||||
\brief description of the TIMER1 OC toggle demo
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright (C) 2017 GigaDevice
|
||||
|
||||
2014-12-26, V1.0.0, platform GD32F1x0(x=3,5)
|
||||
2016-01-15, V2.0.0, platform GD32F1x0(x=3,5,7,9)
|
||||
2016-04-30, V3.0.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
2017-06-19, V3.1.0, firmware update for GD32F1x0(x=3,5,7,9)
|
||||
*/
|
||||
|
||||
This demo is based on the GD32150R-EVAL/GD32190R-EVAL board, it shows how to
|
||||
configure the TIMER peripheral to generate the toggle signal.
|
||||
|
||||
The TIMxCLK frequency is set to systemcoreclock (72MHz), the prescaler is 3600
|
||||
so the TIMER1 counter clock is 20KHz.
|
||||
|
||||
TIMER1 configuration: output compare toggle mode:
|
||||
CH1 update rate = TIMER1 counter clock / CH1VAL = 20000/4000 = 5 Hz.
|
||||
|
||||
Connect the TIMER1 CH1 pin(PB3) to an oscilloscope to monitor the waveform.
|
||||
Reference in New Issue
Block a user