/*!
    \file  gd32f1x0_spi.c
    \brief SPI driver
*/

/*
    Copyright (C) 2017 GigaDevice

    2014-12-26, V1.0.0, platform GD32F1x0(x=3,5)
    2016-01-15, V2.0.0, platform GD32F1x0(x=3,5,7,9)
    2016-04-30, V3.0.0, firmware update for GD32F1x0(x=3,5,7,9)
    2017-06-19, V3.1.0, firmware update for GD32F1x0(x=3,5,7,9)
*/

#include "gd32f1x0_spi.h"

#define SPI_INIT_MASK                   ((uint32_t)0x00003040U)
#define I2S_INIT_MASK                   ((uint32_t)0x0000F047U)
#define SPI_I2SPSC_RESET                ((uint32_t)0x00000002U)  /*!< I2S clock prescaler register reset value */

/*!
    \brief      reset SPI and I2S 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_i2s_deinit(uint32_t spi_periph)
{
    switch(spi_periph){
    case SPI0:
        /* reset SPI0 and I2S0 */
        rcu_periph_reset_enable(RCU_SPI0RST);
        rcu_periph_reset_disable(RCU_SPI0RST);
        break;
    case SPI1:
        /* reset SPI1 */
        rcu_periph_reset_enable(RCU_SPI1RST);
        rcu_periph_reset_disable(RCU_SPI1RST);
        break;
    case SPI2:
        /* reset SPI2 and I2S2 */
        rcu_periph_reset_enable(RCU_SPI2RST);
        rcu_periph_reset_disable(RCU_SPI2RST);
        break;
    default :
        break;
    }
}

/*!
    \brief      initialize SPI parameter
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  spi_struct: SPI parameter initialization stuct members of the structure
	                        and  the member values are shown as below:
                  device_mode   : SPI_MASTER, SPI_SLAVE.
                  trans_mode    : SPI_TRANSMODE_FULLDUPLEX, SPI_TRANSMODE_RECEIVEONLY,
                                  SPI_TRANSMODE_BDRECEIVE, SPI_TRANSMODE_BDTRANSMIT
                  frame_size    : SPI_FRAMESIZE_16BIT, SPI_FRAMESIZE_8BIT
                  nss           : SPI_NSS_SOFT, SPI_NSS_HARD
                  endian        : SPI_ENDIAN_MSB, SPI_ENDIAN_LSB
                  clock_polarity_phase  : SPI_CK_PL_LOW_PH_1EDGE, SPI_CK_PL_HIGH_PH_1EDGE
                                  SPI_CK_PL_LOW_PH_2EDGE, SPI_CK_PL_HIGH_PH_2EDGE
                  prescale      : SPI_PSC_n (n=2,4,8,16,32,64,128,256)
    \param[out] none
    \retval     none
*/
void spi_init(uint32_t spi_periph,spi_parameter_struct* spi_struct)
{   
    uint32_t reg = 0U;
    
    reg = SPI_CTL0(spi_periph);
    reg &= SPI_INIT_MASK;
    /* select SPI as master or slave */
    reg |=spi_struct->device_mode;
    /* select SPI transfer mode */
    reg |=spi_struct->trans_mode;
    /* select SPI frame size */
    reg |=spi_struct->frame_size;
    /* select SPI NSS use hardware or software */
    reg |=spi_struct->nss;
    /* select SPI LSB or MSB */
    reg |=spi_struct->endian;
    /* select SPI polarity and phase */
    reg |=spi_struct->clock_polarity_phase;
    /* select SPI prescale to adjust transmit speed */
    reg |= spi_struct->prescale;

    /* write to SPI_CTL0 register */
    SPI_CTL0(spi_periph) = (uint32_t)reg;

    /* select SPI mode */
    SPI_I2SCTL(spi_periph) &= (uint32_t)(~SPI_I2SCTL_I2SSEL);
}

/*!
    \brief      enable SPI
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_enable(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_SPIEN;
}

/*!
    \brief      disable SPI 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_disable(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_SPIEN);
}

/*!
    \brief      configure I2S prescaler 
    \param[in]  spi_periph: SPIx(only x=0,2)
    \param[in]  audiosample: I2S audio sample rate
      \arg        I2S_AUDIOSAMPLE_8K: audio sample rate is 8KHz
      \arg        I2S_AUDIOSAMPLE_11K: audio sample rate is 11KHz
      \arg        I2S_AUDIOSAMPLE_16K: audio sample rate is 16KHz
      \arg        I2S_AUDIOSAMPLE_22K: audio sample rate is 22KHz
      \arg        I2S_AUDIOSAMPLE_32K: audio sample rate is 32KHz
      \arg        I2S_AUDIOSAMPLE_44K: audio sample rate is 44KHz
      \arg        I2S_AUDIOSAMPLE_48K: audio sample rate is 48KHz
      \arg        I2S_AUDIOSAMPLE_96K: audio sample rate is 96KHz
      \arg        I2S_AUDIOSAMPLE_192K: audio sample rate is 192KHz
    \param[in]  frameformat: I2S data length and channel length
      \arg        I2S_FRAMEFORMAT_DT16B_CH16B: I2S data length is 16 bit and channel length is 16 bit
      \arg        I2S_FRAMEFORMAT_DT16B_CH32B: I2S data length is 16 bit and channel length is 32 bit
      \arg        I2S_FRAMEFORMAT_DT24B_CH32B: I2S data length is 24 bit and channel length is 32 bit
      \arg        I2S_FRAMEFORMAT_DT32B_CH32B: I2S data length is 32 bit and channel length is 32 bit
    \param[in]  mckout: I2S master clock output
      \arg        I2S_MCKOUT_ENABLE: I2S master clock output enable
      \arg        I2S_MCKOUT_DISABLE: I2S master clock output disable
    \param[out] none
    \retval     none
*/
void i2s_psc_config(uint32_t spi_periph,uint32_t audiosample,uint32_t frameformat,uint32_t mckout)
{
    uint32_t i2sdiv = 2U, i2sof = 0U;
    uint32_t clks = 0U;
    uint32_t i2sclock = 0U;

    /* deinit SPI_I2SPSC register */
    SPI_I2SPSC(spi_periph) = SPI_I2SPSC_RESET;

    /* get system clock */
    i2sclock =rcu_clock_freq_get(CK_SYS);    
    /* config the prescaler depending on the mclk output state, the frame format and audio sample rate */
    if(I2S_MCKOUT_ENABLE == mckout){
        clks = (uint32_t)(((i2sclock / 256U) * 10U) / audiosample);
    }else{
        if(I2S_FRAMEFORMAT_DT16B_CH16B == frameformat){
            clks = (uint32_t)(((i2sclock / 32U) *10U ) / audiosample);
        }else{
            clks = (uint32_t)(((i2sclock / 64U) *10U ) / audiosample);
        }
    }
    /* remove the flaoting point */
    clks = (clks+5U)/10U;
    i2sof = (clks & 0x00000001U);
    i2sdiv = ((clks - i2sof)/2U);
    i2sof = (i2sof << 8U);
     
    /* set the default values */
    if((i2sdiv<2U) || (i2sdiv>255U)){
        i2sdiv = 2U;
        i2sof = 0U;
    }
    /* configure SPI_I2SPSC */
    SPI_I2SPSC(spi_periph) = (uint32_t)(i2sdiv | i2sof | mckout);
   /* clear SPI_I2SCTL_DTLEN and SPI_I2SCTL_CHLEN bits */
    SPI_I2SCTL(spi_periph) &= (uint32_t)(~(SPI_I2SCTL_DTLEN | SPI_I2SCTL_CHLEN));
    /* configure data frame format */
    SPI_I2SCTL(spi_periph) |= (uint32_t)frameformat;
}

/*!
    \brief      initialize I2S parameter 
    \param[in]  spi_periph: SPIx(only x=0,2)
    \param[in]  mode: I2S operation mode 
      \arg        I2S_MODE_SLAVETX : I2S slave transmit mode
      \arg        I2S_MODE_SLAVERX : I2S slave receive mode
      \arg        I2S_MODE_MASTERTX : I2S master transmit mode
      \arg        I2S_MODE_MASTERRX : I2S master receive mode
    \param[in]  standard: I2S standard 
      \arg        I2S_STD_PHILLIPS : I2S phillips standard  
      \arg        I2S_STD_MSB : I2S MSB standard
      \arg        I2S_STD_LSB : I2S LSB standard
      \arg        I2S_STD_PCMSHORT : I2S PCM short standard
      \arg        I2S_STD_PCMLONG : I2S PCM long standard
    \param[in]  ckpl: I2S idle state clock polarity 
      \arg        I2S_CKPL_LOW : I2S clock polarity low level
      \arg        I2S_CKPL_HIGH : I2S clock polarity high level
    \param[out] none
    \retval     none
*/
void i2s_init(uint32_t spi_periph,uint32_t mode,uint32_t standard,uint32_t ckpl)
{
    uint32_t reg= 0U;
    reg= SPI_I2SCTL(spi_periph);
    reg &= I2S_INIT_MASK;
    
    /* enable I2S */
    reg |= (uint32_t)SPI_I2SCTL_I2SSEL; 
    /* select I2S mode */
    reg |= (uint32_t)mode;
    /* select I2S standard */
    reg |= (uint32_t)standard;
    /* select I2S polarity */
    reg |= (uint32_t)ckpl;
    /* write to SPI_I2SCTL register */
    SPI_I2SCTL(spi_periph) = (uint32_t)reg;
}

/*!
    \brief      I2S enable
    \param[in]  spi_periph: SPIx(x=0,2)
    \param[out] none
    \retval     none
*/
void i2s_enable(uint32_t spi_periph)
{
    SPI_I2SCTL(spi_periph) |= (uint32_t)SPI_I2SCTL_I2SEN;
}

/*!
    \brief      I2S disable
    \param[in]  spi_periph: SPIx(x=0,2)
    \param[out] none
    \retval     none
*/
void i2s_disable(uint32_t spi_periph)
{
    SPI_I2SCTL(spi_periph) &= (uint32_t)(~SPI_I2SCTL_I2SEN);
}

/*!
    \brief      SPI NSS output enable
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_nss_output_enable(uint32_t spi_periph)
{
    SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_NSSDRV;
}

/*!
    \brief      SPI NSS output disable
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_nss_output_disable(uint32_t spi_periph)
{
    SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_NSSDRV);
}

/*!
    \brief      SPI NSS pin high level in software mode
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_nss_internal_high(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_SWNSS;
}

/*!
    \brief      SPI NSS pin low level in software mode
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_nss_internal_low(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_SWNSS);
}

/*!
    \brief      enable SPI DMA send or receive 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  dma: SPI DMA mode 
      \arg        SPI_DMA_TRANSMIT: SPI transmit data use DMA
      \arg        SPI_DMA_RECEIVE: SPI receive data use DMA
    \param[out] none
    \retval     none
*/
void spi_dma_enable(uint32_t spi_periph,uint8_t dma)
{
    if(SPI_DMA_TRANSMIT == dma){
        SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_DMATEN;
    }else{
        SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_DMAREN;
    }
}

/*!
    \brief      disable SPI DMA send or receive 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  dma: SPI DMA mode 
      \arg        SPI_DMA_TRANSMIT: SPI transmit data use DMA
      \arg        SPI_DMA_RECEIVE: SPI receive data use DMA
    \param[out] none
    \retval     none
*/
void spi_dma_disable(uint32_t spi_periph,uint8_t dma)
{
    if(SPI_DMA_TRANSMIT == dma){
        SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_DMATEN);
    }else{
        SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_DMAREN);
    }
}

/*!
    \brief      configure SPI/I2S data frame format
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  frame_format: SPI frame size
      \arg        SPI_FRAMESIZE_16BIT: SPI frame size is 16 bits
      \arg        SPI_FRAMESIZE_8BIT: SPI frame size is 8 bits
    \param[out] none
    \retval     none
*/
void spi_i2s_data_frame_format_config(uint32_t spi_periph, uint16_t frame_format)
{
    /* clear SPI_CTL0_FF16 bit */
    SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_FF16);
    /* configure SPI_CTL0_FF16 bit */
    SPI_CTL0(spi_periph) |= (uint32_t)frame_format;
}

/*!
    \brief      SPI transmit data
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  data: 16-bit data
    \param[out] none
    \retval     none
*/
void spi_i2s_data_transmit(uint32_t spi_periph,uint16_t data)
{
    SPI_DATA(spi_periph) = (uint32_t)data;
}

/*!
    \brief      SPI receive data
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     16-bit data
*/
uint16_t spi_i2s_data_receive(uint32_t spi_periph)
{
    return ((uint16_t)SPI_DATA(spi_periph));
}

/*!
    \brief      configure SPI bidirectional transfer direction
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  transfer_direction: SPI transfer direction
      \arg        SPI_BIDIRECTIONAL_TRANSMIT: SPI work in transmit-only mode
      \arg        SPI_BIDIRECTIONAL_RECEIVE: SPI work in receive-only mode
    \retval     none
*/
void spi_bidirectional_transfer_config(uint32_t spi_periph, uint32_t transfer_direction)
{
    if(SPI_BIDIRECTIONAL_TRANSMIT == transfer_direction){
        /* set the transmit only mode */
        SPI_CTL0(spi_periph) |= (uint32_t)SPI_BIDIRECTIONAL_TRANSMIT;
    }else{
        /* set the receive only mode */
        SPI_CTL0(spi_periph) &= SPI_BIDIRECTIONAL_RECEIVE;
    }
}

/*!
    \brief      enable SPI and I2S interrupt 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  interrupt:
      \arg        SPI_I2S_INT_TBE: transmit buffer empty interrupt.
      \arg        SPI_I2S_INT_RBNE: receive buffer not empty interrupt.
      \arg        SPI_I2S_INT_ERR: CRC error,configuration error,reception overrun error                                  
    \param[out] none
    \retval     none
*/
void spi_i2s_interrupt_enable(uint32_t spi_periph,uint8_t interrupt)
{
    switch(interrupt){
    /* SPI/I2S transmit buffer empty interrupt */
    case SPI_I2S_INT_TBE :
        SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_TBEIE;
        break;
    /* SPI/I2S receive buffer not empty interrupt */
    case SPI_I2S_INT_RBNE :
        SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_RBNEIE;
        break;
    /* SPI/I2S error */
    case SPI_I2S_INT_ERR :
        SPI_CTL1(spi_periph) |= (uint32_t)SPI_CTL1_ERRIE;
        break;
    default :
        break;
    }
}

/*!
    \brief      disable SPI and I2S interrupt 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  interrupt:
      \arg        SPI_I2S_INT_TBE: transmit buffer empty interrupt.
      \arg        SPI_I2S_INT_RBNE: receive buffer not empty interrupt.
      \arg        SPI_I2S_INT_ERR: CRC error,configuration error,reception overrun error
    \param[out] none
    \retval     none
*/
void spi_i2s_interrupt_disable(uint32_t spi_periph,uint8_t interrupt)
{
    switch(interrupt){
    /* SPI/I2S transmit buffer empty interrupt */
    case SPI_I2S_INT_TBE :
        SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_TBEIE);
        break;
    /* SPI/I2S receive buffer not empty interrupt */
    case SPI_I2S_INT_RBNE :
        SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_RBNEIE);
        break;
    /* SPI/I2S error */
    case SPI_I2S_INT_ERR :
        SPI_CTL1(spi_periph) &= (uint32_t)(~SPI_CTL1_ERRIE);
        break;
    default :
        break;
    }
}
/*!
    \brief      get SPI and I2S interrupt flag status
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  interrupt: SPI/I2S interrupt flag status
      \arg        SPI_I2S_INT_FLAG_TBE: transmit buffer empty interrupt.
      \arg        SPI_I2S_INT_FLAG_RBNE: receive buffer not empty interrupt.
      \arg        SPI_I2S_INT_FLAG_RXORERR: overrun interrupt.
      \arg        SPI_INT_FLAG_CONFERR: config error interrupt.
      \arg        SPI_INT_FLAG_CRCERR: CRC error interrupt.
      \arg        I2S_INT_FLAG_TXURERR: underrun error interrupt.
    \param[out] none
    \retval     FlagStatus: SET or RESET
*/
FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph,uint8_t interrupt)
{
    uint32_t reg1 = SPI_STAT(spi_periph);
    uint32_t reg2 = SPI_CTL1(spi_periph);

    switch(interrupt){
    /* SPI/I2S transmit buffer empty interrupt */
    case SPI_I2S_INT_FLAG_TBE:
        reg1 = reg1 & SPI_STAT_TBE;
        reg2 = reg2 & SPI_CTL1_TBEIE;
        break;
    /* SPI/I2S receive buffer not empty interrupt */
    case SPI_I2S_INT_FLAG_RBNE:
        reg1 = reg1 & SPI_STAT_RBNE;
        reg2 = reg2 & SPI_CTL1_RBNEIE;
        break;
    /* SPI/I2S overrun interrupt */
    case SPI_I2S_INT_FLAG_RXORERR:
        reg1 = reg1 & SPI_STAT_RXORERR;
        reg2 = reg2 & SPI_CTL1_ERRIE;
        break;
    /* SPI config error interrupt */
    case SPI_INT_FLAG_CONFERR:
        reg1 = reg1 & SPI_STAT_CONFERR;
        reg2 = reg2 & SPI_CTL1_ERRIE;
        break;
    /* SPI CRC error interrupt */
    case SPI_INT_FLAG_CRCERR:
        reg1 = reg1 & SPI_STAT_CRCERR;
        reg2 = reg2 & SPI_CTL1_ERRIE;
        break;
    /* I2S underrun error interrupt */
    case I2S_INT_FLAG_TXURERR:
        reg1 = reg1 & SPI_STAT_TXURERR;
        reg2 = reg2 & SPI_CTL1_ERRIE;
        break;
    default :
        break;
    }
    /*get SPI/I2S interrupt flag status */
    if(reg1 && reg2){
        return SET;
    }else{
        return RESET;
    }
}

/*!
    \brief      get SPI and I2S flag status
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  flag: SPI/I2S flag status
      \arg        SPI_FLAG_TBE: transmit buffer empty flag.
      \arg        SPI_FLAG_RBNE: receive buffer not empty flag.
      \arg        SPI_FLAG_TRANS: transmit on-going flag.
      \arg        SPI_FLAG_RXORERR: receive overrun error flag.
      \arg        SPI_FLAG_CONFERR: mode config error flag.
      \arg        SPI_FLAG_CRCERR: CRC error flag.
      \arg        I2S_FLAG_TBE: transmit buffer empty flag.
      \arg        I2S_FLAG_RBNE: receive buffer not empty flag.
      \arg        I2S_FLAG_TRANS: transmit on-going flag.
      \arg        I2S_FLAG_RXORERR: overrun error flag.
      \arg        I2S_FLAG_TXURERR: underrun error flag.
      \arg        I2S_FLAG_CH: channel side flag.
    \param[out] none
    \retval     FlagStatus: SET or RESET
*/
FlagStatus spi_i2s_flag_get(uint32_t spi_periph,uint32_t flag)
{
    if(SPI_STAT(spi_periph) & flag){
        return SET;
    }else{
        return RESET;
    }
}

/*!
    \brief      clear SPI CRC error flag status
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_crc_error_clear(uint32_t spi_periph)
{
    SPI_STAT(spi_periph) &= (uint32_t)(~SPI_FLAG_CRCERR);
}

/*!
    \brief      turn on CRC function 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_crc_on(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_CRCEN;
}

/*!
    \brief      turn off CRC function 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_crc_off(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) &= (uint32_t)(~SPI_CTL0_CRCEN);
}

/*!
    \brief      set CRC polynomial 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  crc_poly: CRC polynomial value
    \param[out] none
    \retval     none
*/
void spi_crc_polynomial_set(uint32_t spi_periph,uint16_t crc_poly)
{
    /* set SPI CRC polynomial */
    SPI_CRCPOLY(spi_periph) = (uint32_t)crc_poly;
}

/*!
    \brief      get SPI CRC polynomial 
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     16-bit CRC polynomial
*/
uint16_t spi_crc_polynomial_get(uint32_t spi_periph)
{
    return ((uint16_t)SPI_CRCPOLY(spi_periph));
}

/*!
    \brief      SPI next data is CRC value
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[out] none
    \retval     none
*/
void spi_crc_next(uint32_t spi_periph)
{
    SPI_CTL0(spi_periph) |= (uint32_t)SPI_CTL0_CRCNT;
}

/*!
    \brief      get SPI CRC send value or receive value
    \param[in]  spi_periph: SPIx(x=0,1,2)
    \param[in]  crc: SPI CRC value
      \arg        SPI_CRC_TX: get transmit CRC value  
      \arg        SPI_CRC_RX: get receive CRC value
    \param[out] none
    \retval     16-bit CRC value
*/
uint16_t spi_crc_get(uint32_t spi_periph,uint8_t crc)
{
    if(SPI_CRC_TX == crc){
        return ((uint16_t)(SPI_TCRC(spi_periph)));
    }else{
        return ((uint16_t)(SPI_RCRC(spi_periph)));
    }
}

#ifdef GD32F170_190
/*!
    \brief      enable quad wire SPI
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
void qspi_enable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) |= (uint32_t)SPI_QCTL_QMOD;
}

/*!
    \brief      disable quad wire SPI 
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
void qspi_disable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) &= ~SPI_QCTL_QMOD ;
}

/*!
    \brief      enable quad wire SPI write 
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
void qspi_write_enable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) &= (uint32_t)(~SPI_QCTL_QRD);
}

/*!
    \brief      enable quad wire SPI read 
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
void qspi_read_enable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) |= (uint32_t)SPI_QCTL_QRD;
}

/*!
    \brief      enable SPI_IO2 and SPI_IO3 pin output 
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
void qspi_io23_output_enable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) |= (uint32_t)SPI_QCTL_IO23_DRV;
}

 /*!
    \brief      disable SPI_IO2 and SPI_IO3 pin output 
    \param[in]  spi_periph: SPIx(only x=1)
    \param[out] none
    \retval     none
*/
 void qspi_io23_output_disable(uint32_t spi_periph)
{
    SPI_QCTL(spi_periph) &= (uint32_t)(~SPI_QCTL_IO23_DRV);
}
#endif  /* GD32F170_190 */