aleks/flix
1
0
Fork 0
mirror of https://github.com/okalachev/flix.git synced 2026-03-29 11:34:36 +00:00
Code Issues Packages Projects Releases Wiki Activity

Minor docs change

Browse Source
This commit is contained in:
Oleg Kalachev
2026-03-27 00:40:19 +03:00
parent 0730ceeffa
commit 814427dbfd
2 changed files with 1 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
docs/troubleshooting.md
View File

@@ -13,7 +13,7 @@ Do the following:
Do the following:
* **Check the battery voltage**. Use a multimeter to measure the battery voltage. It should be in range of 3.7-4.2 V.
* **Check if there are some startup errors**. Connect the ESP32 to the computer and check the Serial Monitor output. Use the Reset button to make sure you see the whole ESP32 startup output.
* **Check if there are some startup errors**. Connect the ESP32 to the computer and check the Serial Monitor output. Use the Reset button or `reboot` command to see the whole startup output.
* **Check the baudrate is correct**. If you see garbage characters in the Serial Monitor, make sure the baudrate is set to 115200.
* **Make sure correct IMU model is chosen**. If using ICM-20948/MPU-6050 board, change `MPU9250` to `ICM20948`/`MPU6050` in the `imu.ino` file.
* **Check if the console is working**. Perform `help` command in Serial Monitor. You should see the list of available commands. You can also access the console using QGroundControl *(Vehicle Setup* ⇒ *Analyze Tools* ⇒ *MAVLink Console)*.

2
docs/usage.md
View File

@@ -143,8 +143,6 @@ If using brushless motors and ESCs:
1. Set the appropriate PWM using the parameters: `MOT_PWM_STOP`, `MOT_PWM_MIN`, and `MOT_PWM_MAX` (1000, 1000, and 2000 is typical).
2. Decrease the PWM frequency using the `MOT_PWM_FREQ` parameter (400 is typical).
Reboot the drone to apply the changes.
> [!CAUTION]
> **Remove the props when configuring the motors!** If improperly configured, you may not be able to stop them.