aleks/flix
1
0
Fork 0
mirror of https://github.com/okalachev/flix.git synced 2026-03-30 03:54:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add parameter for configuring sbus pin number, disable sbus by default

Browse Source
This commit is contained in:
Oleg Kalachev
2026-03-27 00:56:34 +03:00
parent 814427dbfd
commit c434107eaf
5 changed files with 20 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
docs/troubleshooting.md
View File

@@ -35,5 +35,7 @@ Do the following:
* **Check the propeller directions are correct**. Make sure your propeller types (A or B) are installed as on the picture:
<img src="img/user/peter_ukhov-2/1.jpg" width="200">
* **Check the remote control**. Using `rc` command, check the control values reflect your sticks movement. All the controls should change between -1 and 1, and throttle between 0 and 1.
* If using SBUS receiver, **calibrate the RC**. Type `cr` command in Serial Monitor and follow the instructions.
* **If using SBUS receiver**:
* **Define the used GPIO pin** in `RC_RX_PIN` parameter.
* **Calibrate the RC** using `cr` command in the console.
* **Check the IMU output using QGroundControl**. Connect to the drone using QGroundControl on your computer. Go to the *Analyze* tab, *MAVLINK Inspector*. Plot the data from the `SCALED_IMU` message. The gyroscope and accelerometer data should change according to the drone movement.