Add parameters for easier IMU orientation definition

.markdownlint.json

@@ -65,5 +65,6 @@
 			"PX4"
 		]
 	},
-	"MD045": false
+	"MD045": false,
+	"MD060": false
 }

docs/usage.md

@@ -73,14 +73,6 @@ ICM20948 imu(SPI);  // For ICM-20948
 MPU6050 imu(Wire);  // For MPU-6050
 ```
 
-### Setup the IMU orientation
-
-The IMU orientation is defined in `rotateIMU` function in the `imu.ino` file. Change it so it converts the IMU axes to the drone's axes correctly. **Drone axes are X forward, Y left, Z up**:
-
-<img src="img/drone-axes.svg" width="200">
-
-See various [IMU boards axes orientations table](https://github.com/okalachev/flixperiph/?tab=readme-ov-file#imu-axes-orientation) to help you set up the correct orientation.
-
 ### Connect using QGroundControl
 
 QGroundControl is a ground control station software that can be used to monitor and control the drone.
@@ -88,7 +80,7 @@ QGroundControl is a ground control station software that can be used to monitor
 1. Install mobile or desktop version of [QGroundControl](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html).
 2. Power up the drone.
 3. Connect your computer or smartphone to the appeared `flix` Wi-Fi network (password: `flixwifi`).
-4. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically
+4. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.
 
 ### Access console
 
@@ -104,11 +96,35 @@ To access the console using QGroundControl:
 
 1. Connect to the drone using QGroundControl app.
 2. Go to the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Analyze Tools* ⇒ *MAVLink Console*.
-   <img src="img/cli.png" width="400">
+
+<img src="img/cli.png" width="400">
 
 > [!TIP]
 > Use `help` command to see the list of available commands.
 
+### Access parameters
+
+The drone is configured using parameters. To access and modify them, go to the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Parameters*:
+
+<img src="img/parameters.png" width="400">
+
+### Define IMU orientation
+
+Use parameters, to define the IMU board axes orientation relative to the drone's axes: `IMU_ROT_ROLL`, `IMU_ROT_PITCH`, and `IMU_ROT_YAW`.
+
+The drone has *X* axis pointing forward, *Y* axis pointing left, and *Z* axis pointing up, and the supported IMU boards have *X* axis pointing to the pins side and *Z* axis pointing up from the component side:
+
+<img src="img/imu-axes.png" width="200">
+
+Use the following table to set the parameters for common IMU orientations:
+
+|Orientation|Parameters|Orientation|Parameters|
+|:-:|-|-|-|
+|<img src="img/imu-rot-1.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0    |<img src="img/imu-rot-5.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 0|
+|<img src="img/imu-rot-2.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|<img src="img/imu-rot-6.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|
+|<img src="img/imu-rot-3.png" width="180">|`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|<img src="img/imu-rot-7.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 3.142|
+|<img src="img/imu-rot-4.png" width="180"><br>☑️ **Default**|<br>`IMU_ROT_ROLL` = 0<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = -1.571|<img src="img/imu-rot-8.png" width="180">|`IMU_ROT_ROLL` = 3.142<br>`IMU_ROT_PITCH` = 0<br>`IMU_ROT_YAW` = 1.571|
+
 ### Calibrate accelerometer
 
 Before flight you need to calibrate the accelerometer:
@@ -225,12 +241,6 @@ In this mode, the pilot inputs are ignored (except the mode switch, if configure
 
 If the pilot moves the control sticks, the drone will switch back to *STAB* mode.
 
-## Adjusting parameters
-
-You can adjust some of the drone's parameters (include PID coefficients) in QGroundControl. In order to do that, go to the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Parameters*.
-
-<img src="img/parameters.png" width="400">
-
 ## Flight log
 
 After the flight, you can download the flight log for analysis wirelessly. Use the following for that:

flix/imu.ino

@@ -10,6 +10,7 @@
 #include "util.h"
 
 MPU9250 imu(SPI);
+Vector imuRotation(0, 0, -PI / 2); // imu orientation as Euler angles
 
 Vector accBias;
 Vector accScale(1, 1, 1);
@@ -37,16 +38,10 @@ void readIMU() {
 	// apply scale and bias
 	acc = (acc - accBias) / accScale;
 	gyro = gyro - gyroBias;
-	// rotate
+	// rotate to body frame
-	rotateIMU(acc);
+	Quaternion rotation = Quaternion::fromEuler(imuRotation);
-	rotateIMU(gyro);
+	acc = Quaternion::rotateVector(acc, rotation.inversed());
-}
+	gyro = Quaternion::rotateVector(gyro, rotation.inversed());
-
-void rotateIMU(Vector& data) {
-	// Rotate from LFD to FLU
-	// NOTE: In case of using other IMU orientation, change this line:
-	data = Vector(data.y, data.x, -data.z);
-	// Axes orientation for various boards: https://github.com/okalachev/flixperiph#imu-axes-orientation
 }
 
 void calibrateGyroOnce() {

flix/parameters.ino

@@ -43,6 +43,9 @@ Parameter parameters[] = {
 	{"CTL_Y_RATE_MAX", &maxRate.z},
 	{"CTL_TILT_MAX", &tiltMax},
 	// imu
+	{"IMU_ROT_ROLL", &imuRotation.x},
+	{"IMU_ROT_PITCH", &imuRotation.y},
+	{"IMU_ROT_YAW", &imuRotation.z},
 	{"IMU_ACC_BIAS_X", &accBias.x},
 	{"IMU_ACC_BIAS_Y", &accBias.y},
 	{"IMU_ACC_BIAS_Z", &accBias.z},

gazebo/flix.h

@@ -22,6 +22,7 @@ Vector gyro;
 Vector rates;
 Quaternion attitude;
 bool landed;
+Vector imuRotation;
 
 // declarations
 void step();