aleks/flix
1
0
Fork 0
mirror of https://github.com/okalachev/flix.git synced 2026-08-16 00:38:56 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fixes in the docs

Browse Source
This commit is contained in:
Oleg Kalachev
2026-07-04 21:40:39 +03:00
parent 1ae85ff118
commit fabd5e072d
2 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+1 -1
View File
@@ -84,7 +84,7 @@ Additional articles:
|*Boost converter (optional, for more stable power supply)*|*5V output*|<img src="docs/img/buck-boost.jpg" width=100>|1| |*Boost converter (optional, for more stable power supply)*|*5V output*|<img src="docs/img/buck-boost.jpg" width=100>|1|
|Motor|8520 3.7V brushed motor.<br>Motor with exact 3.7V voltage is needed, not ranged working voltage (3.7V — 6V).<br>Make sure the motor shaft diameter and propeller hole diameter match!|<img src="docs/img/motor.jpeg" width=100>|4| |Motor|8520 3.7V brushed motor.<br>Motor with exact 3.7V voltage is needed, not ranged working voltage (3.7V — 6V).<br>Make sure the motor shaft diameter and propeller hole diameter match!|<img src="docs/img/motor.jpeg" width=100>|4|
|Propeller|55 mm or 65 mm|<img src="docs/img/prop.jpg" width=100>|4| |Propeller|55 mm or 65 mm|<img src="docs/img/prop.jpg" width=100>|4|
|MOSFET (transistor)|100N03A or [analog](https://t.me/opensourcequadcopter/33)|<img src="docs/img/100n03a.jpg" width=100>|4| |MOSFET (transistor)|UMW 100N03A or [analog](https://t.me/opensourcequadcopter/33).<br>Warning: don't use KIA 100N03A or other manufacturers, they might not work!|<img src="docs/img/100n03a.jpg" width=100>|4|
|Pull-down resistor<br>Voltage measurement resistor|10 kΩ|<img src="docs/img/resistor10k.jpg" width=100>|6| |Pull-down resistor<br>Voltage measurement resistor|10 kΩ|<img src="docs/img/resistor10k.jpg" width=100>|6|
|3.7V Li-Po battery|LW 952540 (or any compatible by the size).<br>Make sure the battery has enough discharge rate — 25C or more!|<img src="docs/img/battery.jpg" width=100>|1| |3.7V Li-Po battery|LW 952540 (or any compatible by the size).<br>Make sure the battery has enough discharge rate — 25C or more!|<img src="docs/img/battery.jpg" width=100>|1|
|Battery connector cable|MX2.0 2P female|<img src="docs/img/mx.png" width=100>|1| |Battery connector cable|MX2.0 2P female|<img src="docs/img/mx.png" width=100>|1|
docs/usage.md
+4 -4
View File
@@ -198,7 +198,7 @@ After this setup, you should see the battery voltage in QGroundControl top panel
## Setup remote control ## Setup remote control
There are several ways to control the drone's flight: using **smartphone** (Wi-Fi), using **SBUS remote control**, or using **USB remote control** (Wi-Fi). There are several ways to control the drone's flight: using **smartphone** (Wi-Fi), using **SBUS remote control**, or using **USB remote control** (Wi-Fi/ESP-NOW).
### Control with a smartphone ### Control with a smartphone
@@ -243,7 +243,7 @@ If your drone doesn't have RC receiver installed, you can use USB remote control
3. Power up the drone. 3. Power up the drone.
4. Connect your computer to the appeared `flix` Wi-Fi network (password: `flixwifi`). 4. Connect your computer to the appeared `flix` Wi-Fi network (password: `flixwifi`).
5. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically. 5. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.
6. Go the the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Joystick*. Calibrate you USB remote control there. 6. Go to the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Joystick*. Calibrate your USB remote control there.
7. Use the USB remote control to fly the drone! 7. Use the USB remote control to fly the drone!
## Flight ## Flight
@@ -339,7 +339,7 @@ To setup ESP-NOW communication:
espnow 7a:c8:e3:eb:bf:e9 &PiuSysxP9+$L&5E espnow 7a:c8:e3:eb:bf:e9 &PiuSysxP9+$L&5E
``` ```
Run this line as a console command on each drone you want to bind to this proxy board. [The maximum number](https://github.com/espressif/esp-idf/blob/e95cab4be8fd293e3f3323181e7a2280874da6f7/components/esp_wifi/include/esp_now.h#L32-L33) of simultaneously connected drones is 20 (unencrypted) io 6 (encrypted). Run this line as a console command on each drone you want to bind to this proxy board. [The maximum number](https://github.com/espressif/esp-idf/blob/e95cab4be8fd293e3f3323181e7a2280874da6f7/components/esp_wifi/include/esp_now.h#L32-L33) of simultaneously connected drones is 20 (unencrypted) or 6 (encrypted).
3. Set the `WIFI_MODE` parameter to `3` on the drone: 3. Set the `WIFI_MODE` parameter to `3` on the drone:
@@ -356,7 +356,7 @@ To setup ESP-NOW communication:
## Flight log ## Flight log
After the flight, you can download the flight log for analysis wirelessly. Use the following command on your computer for that: After the flight, you can download the flight log wirelessly for analysis. Use the following command on your computer for that:
```bash ```bash
make log make log