Several minor changes

We shouldn't pass messages where system id != our system id. 
This change may be useful when there are many drones in one network.

docs/usage.md

@@ -143,6 +143,8 @@ If using brushless motors and ESCs:
 1. Set the appropriate PWM using the parameters: `MOT_PWM_STOP`, `MOT_PWM_MIN`, and `MOT_PWM_MAX` (1000, 1000, and 2000 is typical).
 2. Decrease the PWM frequency using the `MOT_PWM_FREQ` parameter (400 is typical).
 
+Reboot the drone to apply the changes.
+
 > [!CAUTION]
 > **Remove the props when configuring the motors!** If improperly configured, you may not be able to stop them.
 

docs/user.md

@@ -4,6 +4,17 @@ This page contains user-built drones based on the Flix project. Publish your pro
 
 ---
 
+Author: **Arkadiy "Arky" Matsekh**, Foucault Dynamics, Gold Coast, Australia.<br>
+The drone was built for the University of Queensland industry-led Master's capstone project.
+
+**Flight video:**
+
+<a href="https://drive.google.com/file/d/1NNYSVXBY-w0JjCo07D8-PgnVq3ca9plj/view?usp=sharing"><img height=300 src="img/user/arkymatsekh/video.jpg"></a>
+
+<img src="img/user/arkymatsekh/1.jpg" height=150> <img src="img/user/arkymatsekh/2.jpg" height=150> <img src="img/user/arkymatsekh/3.jpg" height=150>
+
+---
+
 Author: [goldarte](https://t.me/goldarte).<br>
 
 <img src="img/user/goldarte/1.jpg" height=150> <img src="img/user/goldarte/2.jpg" height=150>

flix/control.ino

@@ -52,6 +52,7 @@ PID pitchPID(PITCH_P, PITCH_I, PITCH_D);
 PID yawPID(YAW_P, 0, 0);
 Vector maxRate(ROLLRATE_MAX, PITCHRATE_MAX, YAWRATE_MAX);
 float tiltMax = TILT_MAX;
+int flightModes[] = {STAB, STAB, STAB}; // map for rc mode switch
 
 extern const int MOTOR_REAR_LEFT, MOTOR_REAR_RIGHT, MOTOR_FRONT_RIGHT, MOTOR_FRONT_LEFT;
 extern float controlRoll, controlPitch, controlThrottle, controlYaw, controlMode;
@@ -65,9 +66,9 @@ void control() {
 }
 
 void interpretControls() {
-	if (controlMode < 0.25) mode = STAB;
-	if (controlMode < 0.75) mode = STAB;
-	if (controlMode > 0.75) mode = STAB;
+	if (controlMode < 0.25) mode = flightModes[0];
+	else if (controlMode < 0.75) mode = flightModes[1];
+	else if (controlMode > 0.75) mode = flightModes[2];
 
 	if (mode == AUTO) return; // pilot is not effective in AUTO mode
 

flix/estimate.ino

@@ -1,7 +1,7 @@
 // Copyright (c) 2023 Oleg Kalachev <okalachev@gmail.com>
 // Repository: https://github.com/okalachev/flix
 
-// Attitude estimation from gyro and accelerometer
+// Attitude estimation using gyro and accelerometer
 
 #include "quaternion.h"
 #include "vector.h"

flix/flix.ino

@@ -21,8 +21,8 @@ void setup() {
 	disableBrownOut();
 	setupParameters();
 	setupLED();
-	setupMotors();
 	setLED(true);
+	setupMotors();
 	setupWiFi();
 	setupIMU();
 	setupRC();

flix/mavlink.ino

@@ -8,12 +8,13 @@
 
 extern float controlTime;
 
-bool mavlinkConnected = false;
-String mavlinkPrintBuffer;
 int mavlinkSysId = 1;
 Rate telemetryFast(10);
 Rate telemetrySlow(2);
 
+bool mavlinkConnected = false;
+String mavlinkPrintBuffer;
+
 void processMavlink() {
 	sendMavlink();
 	receiveMavlink();
@@ -41,9 +42,9 @@ void sendMavlink() {
 	}
 
 	if (telemetryFast && mavlinkConnected) {
-		const float zeroQuat[] = {0, 0, 0, 0};
+		const float offset[] = {0, 0, 0, 0};
 		mavlink_msg_attitude_quaternion_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
-			time, attitude.w, attitude.x, -attitude.y, -attitude.z, rates.x, -rates.y, -rates.z, zeroQuat); // convert to frd
+			time, attitude.w, attitude.x, -attitude.y, -attitude.z, rates.x, -rates.y, -rates.z, offset); // convert to frd
 		sendMessage(&msg);
 
 		mavlink_msg_rc_channels_raw_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, controlTime * 1000, 0,

flix/motors.ino

@@ -24,7 +24,6 @@ void setupMotors() {
 	// configure pins
 	for (int i = 0; i < 4; i++) {
 		ledcAttach(motorPins[i], pwmFrequency, pwmResolution);
-		pwmFrequency = ledcChangeFrequency(motorPins[i], pwmFrequency, pwmResolution); // if re-initializing
 	}
 	sendMotors();
 	print("Motors initialized\n");

flix/parameters.ino

@@ -15,9 +15,9 @@ extern float rcLossTimeout, descendTime;
 Preferences storage;
 
 struct Parameter {
-	const char *name; // max length is 15 (Preferences key limit)
+	const char *name; // max length is 15
 	bool integer;
-	union { float *f; int *i; }; // pointer to variable
+	union { float *f; int *i; }; // pointer to the variable
 	float cache; // what's stored in flash
 	Parameter(const char *name, float *variable) : name(name), integer(false), f(variable) {};
 	Parameter(const char *name, int *variable) : name(name), integer(true), i(variable) {};
@@ -49,6 +49,9 @@ Parameter parameters[] = {
 	{"CTL_R_RATE_MAX", &maxRate.x},
 	{"CTL_Y_RATE_MAX", &maxRate.z},
 	{"CTL_TILT_MAX", &tiltMax},
+	{"CTL_FLT_MODE_0", &flightModes[0]},
+	{"CTL_FLT_MODE_1", &flightModes[1]},
+	{"CTL_FLT_MODE_2", &flightModes[2]},
 	// imu
 	{"IMU_ROT_ROLL", &imuRotation.x},
 	{"IMU_ROT_PITCH", &imuRotation.y},
@@ -109,6 +112,7 @@ Parameter parameters[] = {
 };
 
 void setupParameters() {
+	print("Setup parameters\n");
 	storage.begin("flix", false);
 	// Read parameters from storage
 	for (auto &parameter : parameters) {
@@ -120,11 +124,6 @@ void setupParameters() {
 	}
 }
 
-void afterParameterChange(String name, const float value) {
-	if (name == "MOT_PWM_FREQ" || name == "MOT_PWM_RES") setupMotors();
-	if (name == "MOT_PIN_FL" || name == "MOT_PIN_FR" || name == "MOT_PIN_RL" || name == "MOT_PIN_RR") setupMotors();
-}
-
 int parametersCount() {
 	return sizeof(parameters) / sizeof(parameters[0]);
 }
@@ -153,7 +152,6 @@ bool setParameter(const char *name, const float value) {
 		if (strcasecmp(parameter.name, name) == 0) {
 			if (parameter.integer && !isfinite(value)) return false; // can't set integer to NaN or Inf
 			parameter.setValue(value);
-			afterParameterChange(name, value);
 			return true;
 		}
 	}

gazebo/Arduino.h

@@ -165,7 +165,6 @@ void delay(uint32_t ms) {
 
 bool ledcAttach(uint8_t pin, uint32_t freq, uint8_t resolution) { return true; }
 bool ledcWrite(uint8_t pin, uint32_t duty) { return true; }
-uint32_t ledcChangeFrequency(uint8_t pin, uint32_t freq, uint8_t resolution) { return freq; }
 
 unsigned long __micros;
 unsigned long __resetTime = 0;

gazebo/flix.h

@@ -9,6 +9,7 @@
 #include "quaternion.h"
 #include "Arduino.h"
 #include "wifi.h"
+#include "lpf.h"
 
 extern float t, dt;
 extern float controlRoll, controlPitch, controlYaw, controlThrottle, controlMode;
@@ -19,6 +20,7 @@ extern float motors[4];
 
 Vector gyro, acc, imuRotation;
 Vector accBias, gyroBias, accScale(1, 1, 1);
+LowPassFilter<Vector> gyroBiasFilter(0);
 
 // declarations
 void step();

gazebo/wifi.h

@@ -11,9 +11,10 @@
 #include <sys/poll.h>
 #include <gazebo/gazebo.hh>
 
-#define WIFI_UDP_PORT 14580
-#define WIFI_UDP_REMOTE_PORT 14550
-#define WIFI_UDP_REMOTE_ADDR "255.255.255.255"
+int wifiMode = 1; // mock
+int udpLocalPort = 14580;
+int udpRemotePort = 14550;
+const char *udpRemoteIP = "255.255.255.255";
 
 int wifiSocket;
 
@@ -22,22 +23,22 @@ void setupWiFi() {
 	sockaddr_in addr; // local address
 	addr.sin_family = AF_INET;
 	addr.sin_addr.s_addr = INADDR_ANY;
-	addr.sin_port = htons(WIFI_UDP_PORT);
+	addr.sin_port = htons(udpLocalPort);
 	if (bind(wifiSocket, (sockaddr *)&addr, sizeof(addr))) {
-		gzerr << "Failed to bind WiFi UDP socket on port " << WIFI_UDP_PORT << std::endl;
+		gzerr << "Failed to bind WiFi UDP socket on port " << udpLocalPort << std::endl;
 		return;
 	}
 	int broadcast = 1;
 	setsockopt(wifiSocket, SOL_SOCKET, SO_BROADCAST, &broadcast, sizeof(broadcast)); // enable broadcast
-	gzmsg << "WiFi UDP socket initialized on port " << WIFI_UDP_PORT << " (remote port " << WIFI_UDP_REMOTE_PORT << ")" << std::endl;
+	gzmsg << "WiFi UDP socket initialized on port " << udpLocalPort << " (remote port " << udpRemotePort << ")" << std::endl;
 }
 
 void sendWiFi(const uint8_t *buf, int len) {
 	if (wifiSocket == 0) setupWiFi();
 	sockaddr_in addr; // remote address
 	addr.sin_family = AF_INET;
-	addr.sin_addr.s_addr = inet_addr(WIFI_UDP_REMOTE_ADDR);
-	addr.sin_port = htons(WIFI_UDP_REMOTE_PORT);
+	addr.sin_addr.s_addr = inet_addr(udpRemoteIP);
+	addr.sin_port = htons(udpRemotePort);
 	sendto(wifiSocket, buf, len, 0, (sockaddr *)&addr, sizeof(addr));
 }
 

tools/pyflix/flix.py

@@ -138,7 +138,7 @@ class Flix:
         while True:
             try:
                 msg: Optional[mavlink.MAVLink_message] = self.connection.recv_match(blocking=True)
-                if msg is None:
+                if msg is None or msg.get_srcSystem() != self.system_id:
                     continue
                 self._connected()
                 msg_dict = msg.to_dict()