aleks/hoverboard-sideboard-hack-GD
1
0
Fork 0
mirror of https://github.com/EFeru/hoverboard-sideboard-hack-GD.git synced 2026-02-17 23:51:08 +00:00
Code Issues Packages Projects Releases Wiki Activity

Added iBUS on AUX Serial

Browse Source 
- iBUS implementation
- changed default baud rate to 115200
- updated platformio.ini, the chip is now supported by Platformio
This commit is contained in:
EmanuelFeru
2020-11-30 19:23:30 +01:00
parent d80bde1d27
commit 46ee23e975
11 changed files with 464 additions and 221 deletions
Download Patch File Download Diff File Expand all files Collapse all files

52
Inc/config.h
View File

@@ -27,8 +27,9 @@
// Ubuntu: define the desired build variant here if you want to use make in console
// or use VARIANT environment variable for example like "make -e VARIANT=VARIANT_DEBUG". Select only one at a time.
#if !defined(PLATFORMIO)
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERCAR // Variant for using the side-boards connected to the Hoverboard mainboard
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
#endif
/* ==================================== DO NOT TOUCH SETTINGS ==================================== */
@@ -40,7 +41,6 @@
// #define PRINTF_FLOAT_SUPPORT // [-] Uncomment this for printf to support float on Serial Debug. It will increase code size! Better to avoid it!
/* =============================================================================================== */
/* ==================================== SETTINGS MPU-6050 ==================================== */
#define MPU_SENSOR_ENABLE // [-] Enable flag for MPU-6050 sensor. Comment-out this flag to Disable the MPU sensor and reduce code size.
#define MPU_DMP_ENABLE // [-] Enable flag for MPU-6050 DMP (Digital Motion Processing) functionality.
@@ -59,32 +59,50 @@
#define DMP_SHAKE_REJECT_TIME 40 // [ms] Set shake rejection time. Sets the length of time that the gyro must be outside of the DMP_SHAKE_REJECT_THRESH before taps are rejected. A mandatory 60 ms is added to this parameter.
#define DMP_SHAKE_REJECT_TIMEOUT 10 // [ms] Set shake rejection timeout. Sets the length of time after a shake rejection that the gyro must stay inside of the threshold before taps can be detected again. A mandatory 60 ms is added to this parameter.
/* ==================================== SETTINGS USART ==================================== */
#if defined(VARIANT_DEBUG)
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#elif defined(VARIANT_HOVERBOARD)
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#endif
#define USART_MAIN_BAUD 38400 // [bit/s] MAIN Serial Tx/Rx baud rate
#define SERIAL_START_FRAME 0xABCD // [-] Start frame definition for reliable serial communication
#define SERIAL_BUFFER_SIZE 64 // [bytes] Size of Serial Rx buffer. Make sure it is always larger than the 'Feedback' structure size
#define SERIAL_TIMEOUT 600 // [-] Number of wrong received data for Serial timeout detection. Depends on DELAY_IN_MAIN_LOOP
#define USART_MAIN_BAUD 115200 // [bit/s] MAIN Serial Tx/Rx baud rate
#define USART_AUX_BAUD 115200 // [bit/s] AUX Serial Tx/Rx baud rate
/* ==================================== SETTINGS AUX ==================================== */
// #define AUX45_USE_GPIO // [-] Use AUX4, AUX5 as GPIO ports
// #define AUX45_USE_I2C // [-] Use AUX4, AUX5 as I2C port
#define AUX45_USE_USART // [-] Use AUX4, AUX5 as USART port
#ifdef AUX45_USE_USART
#define USART_AUX_BAUD 38400 // [bit/s] AUX Serial Tx/Rx baud rate
#endif
#ifdef AUX45_USE_I2C
#define AUX_I2C_SPEED 100000 // [bit/s] Define I2C speed for communicating via AUX45 wires
#endif
/* ==================================== VARIANT DEBUG ==================================== */
#ifdef VARIANT_DEBUG
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#endif
/* ==================================== VARIANT HOVERCAR ==================================== */
#ifdef VARIANT_HOVERCAR
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#define SERIAL_AUX_TX // [-] Use AUX4, AUX5 as USART port
#define SERIAL_AUX_RX // [-] Use AUX4, AUX5 as USART port
#define CONTROL_IBUS
#define IBUS_NUM_CHANNELS 14 // total number of IBUS channels to receive, even if they are not used.
#define IBUS_LENGTH 0x20
#define IBUS_COMMAND 0x40
#endif
/* ==================================== VARIANT HOVERBOARD ==================================== */
#ifdef VARIANT_HOVERBOARD
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#endif
/* ==================================== VALIDATE SETTINGS ==================================== */
#if defined(SERIAL_DEBUG) && defined(SERIAL_CONTROL)
#error SERIAL_DEBUG and SERIAL_CONTROL not allowed. It is on the same cable.
@@ -94,7 +112,7 @@
#error SERIAL_DEBUG and SERIAL_FEEDBACK not allowed. It is on the same cable.
#endif
#if defined(AUX45_USE_GPIO) && (defined(AUX45_USE_USART) || defined(AUX45_USE_I2C)) || (defined(AUX45_USE_USART) && defined(AUX45_USE_I2C))
#if defined(AUX45_USE_GPIO) && (defined(SERIAL_AUX_RX) || defined(AUX45_USE_I2C)) || (defined(SERIAL_AUX_RX) && defined(AUX45_USE_I2C))
#error AUX45_USE_(GPIO,USART,I2C) not allowed in the same time. It is on the same cable.
#endif