aleks/hoverboard-sideboard-hack-STM
1
0
Fork 0
mirror of https://github.com/EFeru/hoverboard-sideboard-hack-STM.git synced 2026-02-17 15:31:11 +00:00
Code Issues Packages Projects Releases Wiki Activity

Added Hovercar variant

Browse Source 
- hovercar variant
- iBUS receiver support
- updated baud rate to 115200
This commit is contained in:
EmanuelFeru
2020-12-07 20:30:38 +01:00
parent 786baa4c06
commit 323e30b5bb
95 changed files with 35305 additions and 22056 deletions
Download Patch File Download Diff File Expand all files Collapse all files

55
Inc/config.h
View File

@@ -27,8 +27,9 @@
// Ubuntu: define the desired build variant here if you want to use make in console
// or use VARIANT environment variable for example like "make -e VARIANT=VARIANT_DEBUG". Select only one at a time.
#if !defined(PLATFORMIO)
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
// #define VARIANT_DEBUG // Variant for debugging and checking the capabilities of the side-board
// #define VARIANT_HOVERCAR // Variant for using the side-boards connected to the Hoverboard mainboard
// #define VARIANT_HOVERBOARD // Variant for using the side-boards connected to the Hoverboard mainboard
#endif
/* ==================================== DO NOT TOUCH SETTINGS ==================================== */
@@ -36,9 +37,7 @@
#define MPU6050 // [-] Define IMU sensor type
#define MPU_GYRO_FSR 2000 // [deg/s] Set Gyroscope Full Scale Range: 250 deg/s, 500 deg/s, 1000 deg/s, 2000 deg/s. !! DMP sensor fusion works only with 2000 deg/s !!
#define MPU_ACCEL_FSR 2 // [g] Set Acceleromenter Full Scale Range: 2g, 4g, 8g, 16g. !! DMP sensor fusion works only with 2g !!
#ifdef BYPASS_CUBEMX_DEFINES
#define MPU_I2C_SPEED 400000 // [bit/s] Define I2C speed for communicating with the MPU6050
#endif
#define MPU_I2C_SPEED 400000 // [bit/s] Define I2C speed for communicating with the MPU6050
#define DELAY_IN_MAIN_LOOP 1 // [ms] Delay in the main loop
// #define PRINTF_FLOAT_SUPPORT // [-] Uncomment this for printf to support float on Serial Debug. It will increase code size! Better to avoid it!
/* =============================================================================================== */
@@ -63,18 +62,46 @@
#define DMP_SHAKE_REJECT_TIMEOUT 10 // [ms] Set shake rejection timeout. Sets the length of time after a shake rejection that the gyro must stay inside of the threshold before taps can be detected again. A mandatory 60 ms is added to this parameter.
/* ==================================== SETTINGS USART ==================================== */
#if defined(VARIANT_DEBUG)
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#elif defined(VARIANT_HOVERBOARD)
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#endif
#ifdef BYPASS_CUBEMX_DEFINES
#define USART_MAIN_BAUD 38400 // [bit/s] MAIN Serial Tx/Rx baud rate
#endif
#define SERIAL_START_FRAME 0xABCD // [-] Start frame definition for reliable serial communication
#define SERIAL_BUFFER_SIZE 64 // [bytes] Size of Serial Rx buffer. Make sure it is always larger than the 'Feedback' structure size
#define SERIAL_TIMEOUT 600 // [-] Number of wrong received data for Serial timeout detection. Depends on DELAY_IN_MAIN_LOOP
#define USART_MAIN_BAUD 115200 // [bit/s] MAIN Serial Tx/Rx baud rate
#define USART_AUX_BAUD 115200 // [bit/s] AUX Serial Tx/Rx baud rate
/* ==================================== VARIANT DEBUG ==================================== */
#ifdef VARIANT_DEBUG
#define SERIAL_DEBUG // [-] Define for Serial Debug via the serial port
#define SERIAL_AUX_RX // [-] Use AUX4, AUX5 as USART port
// #define SERIAL_AUX_TX // [-] Use AUX4, AUX5 as USART port
#define CONTROL_IBUS
#define IBUS_NUM_CHANNELS 14 // Total number of IBUS channels to receive, even if they are not used.
#define IBUS_LENGTH 0x20
#define IBUS_COMMAND 0x40
#endif
/* ==================================== VARIANT HOVERCAR ==================================== */
#ifdef VARIANT_HOVERCAR
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#define SERIAL_AUX_RX // [-] Use AUX4, AUX5 as USART port
// #define SERIAL_AUX_TX // [-] Use AUX4, AUX5 as USART port
#define CONTROL_IBUS
#define IBUS_NUM_CHANNELS 14 // Total number of IBUS channels to receive, even if they are not used.
#define IBUS_LENGTH 0x20
#define IBUS_COMMAND 0x40
#endif
/* ==================================== VARIANT HOVERBOARD ==================================== */
#ifdef VARIANT_HOVERBOARD
#define SERIAL_CONTROL // [-] Define for Serial Control via the serial port
#define SERIAL_FEEDBACK // [-] Define for Serial Feedback via the serial port
#endif
/* ==================================== VALIDATE SETTINGS ==================================== */
#if defined(SERIAL_DEBUG) && defined(SERIAL_CONTROL)