Oleg Kalachev
149c62568f
Refactor CLI submodule
...
Move command parsing to doCommand
Parse command with splitString instead of stringToken
Trim commands
Move cliTestMotor to the bottom
Rename parseInput to handleInput, which is more clear
Move motor test function to motors.ino
2025-02-17 15:51:58 +03:00
Oleg Kalachev
15fbe34d19
Add failsafe to prevent arming without prior zero throttle
2025-01-24 16:23:59 +03:00
Oleg Kalachev
70f5186c1b
Use double for storing time instead of float
...
Float precision may be not enough after some time of operating
2025-01-12 19:58:36 +03:00
Oleg Kalachev
ac54c954aa
Cleanup
2025-01-11 04:31:53 +03:00
Oleg Kalachev
9e4a2c5ffc
Move controlsTime variable to rc.ino
2025-01-11 00:28:31 +03:00
Oleg Kalachev
821e6b105e
Make channels definition to rc.ino
...
It's also planned to parametrize them later
2025-01-10 09:37:48 +03:00
Oleg Kalachev
698cc3d9b8
Global variables cleanups
...
Remove unused PID objects for cli
Move loopRate to time.ino
2025-01-10 07:10:30 +03:00
Oleg Kalachev
c8109af04f
Make ONE_G definition const and move to utils.ino
2025-01-09 11:24:40 +03:00
Oleg Kalachev
404ceed851
Make motor indexes definition const int and move them to motors.ino
...
Remove motor indexes definitions from flix.ino
Add motors.ino to simulation code and implement required mocks
2025-01-09 11:14:18 +03:00
Oleg Kalachev
ae349fb73c
Implement parameters subsystem
...
* Unified parameters storage.
* Store parameters in flash on the hardware.
* Store parameters in text file in simulation.
* Work with parameters in command line.
* Support parameters in MAVLink for working with parameters in QGC.
2024-12-23 13:00:02 +03:00
Oleg Kalachev
7533a9cbfa
Move ONE_G definition to flix.ino
2024-12-23 02:37:03 +03:00
Oleg Kalachev
ea141f851f
Use 'loop rate' term instead of misleading 'loop frequency'
2024-12-04 07:00:00 +03:00
Oleg Kalachev
b015c15a7e
Remove non-working fullmot command
2024-11-24 00:10:37 +03:00
Oleg Kalachev
ec832d4e37
Implement RC fail-safe
2024-11-04 11:51:17 +03:00
Oleg Kalachev
2fdad7bdb6
Remove LED horizontality signalization
...
It's better to control the attitude estimation using QGC
2024-11-03 17:41:13 +03:00
Oleg Kalachev
c5c889679b
Fix simulation build
2024-10-31 19:27:27 +03:00
Oleg Kalachev
abcc9b96de
Use FLU as the main coordinate system instead of FRD
...
Corresponding to the IMU orientation in the new version
2024-10-23 09:30:49 +03:00
Oleg Kalachev
f46460e53d
Make RC_CHANNELS=16 corresponding the number of SBUS channels
2024-10-23 09:28:09 +03:00
Oleg Kalachev
23f3295439
Remove ESC support and add MOSFET support in motors code
...
The new version uses MOSFETs
2024-10-23 09:27:54 +03:00
Oleg Kalachev
41a9a95747
Transfer gyro low pass filter to estimate.ino
...
Separate raw gyro data and filtered rates to different variables
2024-04-20 14:52:01 +03:00
Oleg Kalachev
646fa46f6b
Use FlixPeriph library for SBUS
2024-03-17 02:29:37 +03:00
Oleg Kalachev
f718af7f0e
Support MAVLink usage in simulation
2024-01-31 12:10:18 +03:00
Oleg Kalachev
f520b57abe
Implement RC calibration, common for the real drone and the simulation
2024-01-02 11:54:09 +03:00
Oleg Kalachev
2c21114540
Refactor control, remake controlManual to controlTorque
2023-12-13 08:33:35 +03:00
Oleg Kalachev
46579ce8a4
Better code for yaw target
2023-12-13 07:49:57 +03:00
Oleg Kalachev
89bf8a7f14
Cleanup
2023-12-04 00:28:02 +03:00
Oleg Kalachev
94b483cda6
Transfer fullMotorTest function to motors.ino
2023-12-03 20:43:55 +03:00
Oleg Kalachev
39875cafb9
Remove non-effective statics
2023-05-31 20:12:45 +03:00
Oleg Kalachev
9a93367629
Make dt=0 on first step, simplify code
2023-05-31 20:07:38 +03:00
Oleg Kalachev
88cc792287
Cleanups
2023-05-26 16:24:19 +03:00
Oleg Kalachev
c1aa0d9869
Store current time in float variable
2023-05-26 16:23:30 +03:00
Oleg Kalachev
c5323f5723
Add accel calibration command
2023-05-26 16:21:54 +03:00
Oleg Kalachev
1125335b16
Cleanup, use printf
2023-05-24 11:22:59 +03:00
Oleg Kalachev
17edd0ee00
Show imu data in cli
2023-05-24 11:05:11 +03:00
Oleg Kalachev
34fd303027
Restore accidentally removed files
2023-05-24 10:58:34 +03:00
