Show default parameter values in p command output

Also move float comparing logic to a distinct util function.

.gitignore

@@ -4,9 +4,10 @@ build/
 tools/log/
 tools/dist/
 *.egg-info/
-.dependencies
+.core
+.libs
 .vscode/*
-!.vscode/settings.json
+!.vscode/settings.default.json
 !.vscode/c_cpp_properties.json
 !.vscode/tasks.json
 !.vscode/launch.json

.vscode/c_cpp_properties.json

@@ -6,18 +6,18 @@
 				"${workspaceFolder}/flix",
 				"${workspaceFolder}/gazebo",
 				"${workspaceFolder}/tools/**",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
-				"~/.arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.10/libraries/**",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32",
+				"~/.arduino15/packages/esp32/tools/esp32-libs/3.3.10/include/**",
 				"~/Arduino/libraries/**",
 				"/usr/include/gazebo-11/",
 				"/usr/include/ignition/math6/"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
-				"~/.arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32/Arduino.h",
+				"~/.arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
 				"${workspaceFolder}/flix/estimate.ino",
@@ -33,7 +33,7 @@
 				"${workspaceFolder}/flix/parameters.ino",
 				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/.arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++",
+			"compilerPath": "~/.arduino15/packages/esp32/tools/esp-x32/2601/bin/xtensa-esp32-elf-g++",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [
@@ -53,18 +53,18 @@
 			"name": "Mac",
 			"includePath": [
 				"${workspaceFolder}/flix",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
-				"~/Library/Arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.10/libraries/**",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32",
+				"~/Library/Arduino15/packages/esp32/tools/esp32-libs/3.3.10/include/**",
 				"~/Documents/Arduino/libraries/**",
 				"/opt/homebrew/include/gazebo-11/",
 				"/opt/homebrew/include/ignition/math6/"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
-				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32/Arduino.h",
+				"~/Library/Arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/flix.ino",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
@@ -80,7 +80,7 @@
 				"${workspaceFolder}/flix/parameters.ino",
 				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/Library/Arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++",
+			"compilerPath": "~/Library/Arduino15/packages/esp32/tools/esp-x32/2601/bin/xtensa-esp32-elf-g++",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [
@@ -103,16 +103,16 @@
 				"${workspaceFolder}/flix",
 				"${workspaceFolder}/gazebo",
 				"${workspaceFolder}/tools/**",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/libraries/**",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32",
-				"~/AppData/Local/Arduino15/packages/esp32/tools/esp32-libs/3.3.6/include/**",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.10/libraries/**",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32",
+				"~/AppData/Local/Arduino15/packages/esp32/tools/esp32-libs/3.3.10/include/**",
 				"~/Documents/Arduino/libraries/**"
 			],
 			"forcedInclude": [
 				"${workspaceFolder}/.vscode/intellisense.h",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/cores/esp32/Arduino.h",
-				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.6/variants/d1_mini32/pins_arduino.h",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.10/cores/esp32/Arduino.h",
+				"~/AppData/Local/Arduino15/packages/esp32/hardware/esp32/3.3.10/variants/d1_mini32/pins_arduino.h",
 				"${workspaceFolder}/flix/cli.ino",
 				"${workspaceFolder}/flix/control.ino",
 				"${workspaceFolder}/flix/estimate.ino",
@@ -128,7 +128,7 @@
 				"${workspaceFolder}/flix/parameters.ino",
 				"${workspaceFolder}/flix/safety.ino"
 			],
-			"compilerPath": "~/AppData/Local/Arduino15/packages/esp32/tools/esp-x32/2511/bin/xtensa-esp32-elf-g++.exe",
+			"compilerPath": "~/AppData/Local/Arduino15/packages/esp32/tools/esp-x32/2601/bin/xtensa-esp32-elf-g++.exe",
 			"cStandard": "c11",
 			"cppStandard": "c++17",
 			"defines": [

.vscode/extensions.json

@@ -1,6 +1,7 @@
 {
 	// See https://go.microsoft.com/fwlink/?LinkId=827846 to learn about workspace recommendations.
 	"recommendations": [
+		"dangmai.workspace-default-settings",
 		"ms-vscode.cpptools",
 		"ms-vscode.cmake-tools",
 		"ms-python.python"

Makefile

@@ -1,24 +1,32 @@
-BOARD = esp32:esp32:d1_mini32
+BOARD = esp32:esp32:d1_mini32:DebugLevel=error
 PORT := $(strip $(wildcard /dev/serial/by-id/usb-Silicon_Labs_CP21* /dev/serial/by-id/usb-1a86_USB_Single_Serial_* /dev/cu.usbserial-* /dev/cu.usbmodem*))
 
-build: .dependencies
+export ARDUINO_NETWORK_CONNECTION_TIMEOUT := 1h
+
+build: .core .libs
 	arduino-cli compile --fqbn $(BOARD) flix
 
 upload: build
 	arduino-cli upload --fqbn $(BOARD) -p "$(PORT)" flix
 
+erase:
+	arduino-cli burn-bootloader --fqbn $(BOARD) -p "$(PORT)" -P esptool
+
 monitor:
 	arduino-cli monitor -p "$(PORT)" -c baudrate=115200
 
-dependencies .dependencies:
-	arduino-cli core update-index --config-file arduino-cli.yaml
-	arduino-cli core install esp32:esp32@3.3.6 --config-file arduino-cli.yaml
+core .core:
+	arduino-cli core update-index --additional-urls https://espressif.github.io/arduino-esp32/package_esp32_index.json
+	arduino-cli core install esp32:esp32@3.3.10 --additional-urls https://espressif.github.io/arduino-esp32/package_esp32_index.json
+	touch .core
+
+libs .libs:
 	arduino-cli lib update-index
 	arduino-cli lib install "FlixPeriph"
 	arduino-cli lib install "MAVLink"@2.0.25
-	touch .dependencies
+	touch .libs
 
-upload_proxy: .dependencies
+upload_proxy: .core .libs
 	arduino-cli compile --fqbn $(BOARD) tools/espnow-proxy
 	arduino-cli upload --fqbn $(BOARD) -p "$(PORT)" tools/espnow-proxy
 
@@ -26,7 +34,7 @@ gazebo/build cmake: gazebo/CMakeLists.txt
 	mkdir -p gazebo/build
 	cd gazebo/build && cmake ..
 
-build_simulator: .dependencies gazebo/build
+build_simulator: .libs gazebo/build
 	make -C gazebo/build
 
 simulator: build_simulator
@@ -41,6 +49,6 @@ plot:
 	plotjuggler -d $(shell ls -t tools/log/*.csv | head -n1)
 
 clean:
-	rm -rf gazebo/build flix/build flix/cache .dependencies
+	rm -rf gazebo/build flix/build flix/cache .core .libs
 
-.PHONY: build upload monitor dependencies cmake build_simulator simulator log clean
+.PHONY: build upload monitor core libs cmake build_simulator simulator log clean

README.md

@@ -47,6 +47,14 @@ See the [user builds gallery](docs/user.md):
 
 <a href="docs/user.md"><img src="docs/img/user/user.jpg" width=500></a>
 
+### PCB
+
+The official PCB *(Flix2)* is in development now. Follow the [project's channel](https://t.me/opensourcequadcopter) to track the progress.
+
+Outdoor flights demo video of the current prototype:
+
+<a href="https://youtu.be/KXlNmvUTi4g"><img width=300 src="https://i3.ytimg.com/vi/KXlNmvUTi4g/maxresdefault.jpg"></a>
+
 ## Simulation
 
 The simulator is implemented using Gazebo and runs the original Arduino code:
@@ -73,7 +81,7 @@ Additional articles:
 |-|-|:-:|:-:|
 |Microcontroller board|ESP32 Mini.<br>ESP32-S3/ESP32-C3 boards are also supported.|<img src="docs/img/esp32.jpg" width=100>|1|
 |IMU (and barometer¹) board|GY‑91, MPU-9265 (or other MPU‑9250/MPU‑6500 board)<br>ICM20948V2 (ICM‑20948)<br>GY-521 (MPU-6050)|<img src="docs/img/gy-91.jpg" width=90 align=center><br><img src="docs/img/icm-20948.jpg" width=100><br><img src="docs/img/gy-521.jpg" width=100>|1|
-|Boost converter (optional, for more stable power supply)|5V output|<img src="docs/img/buck-boost.jpg" width=100>|1|
+|*Boost converter (optional, for more stable power supply)*|*5V output*|<img src="docs/img/buck-boost.jpg" width=100>|1|
 |Motor|8520 3.7V brushed motor.<br>Motor with exact 3.7V voltage is needed, not ranged working voltage (3.7V — 6V).<br>Make sure the motor shaft diameter and propeller hole diameter match!|<img src="docs/img/motor.jpeg" width=100>|4|
 |Propeller|55 mm or 65 mm|<img src="docs/img/prop.jpg" width=100>|4|
 |MOSFET (transistor)|100N03A or [analog](https://t.me/opensourcequadcopter/33)|<img src="docs/img/100n03a.jpg" width=100>|4|

arduino-cli.yaml

@@ -1,5 +0,0 @@
-board_manager:
-  additional_urls:
-    - https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
-network:
-  connection_timeout: 1h

docs/firmware.md

@@ -79,6 +79,9 @@ To add a new parameter:
 
 See examples of adding new parameters in commits: [c434107](https://github.com/okalachev/flix/commit/c434107), [a687303](https://github.com/okalachev/flix/commit/a687303).
 
+> [!NOTE]
+> Since all the parameters are internally stored and passed as floats, the safe range for `int` parameters is -16777216 to 16777215.
+
 ## Adding a subsystem
 
 To add a new subsystem:

docs/troubleshooting.md

@@ -5,7 +5,7 @@
 Do the following:
 
 * **Check ESP32 core is installed**. Check if the version matches the one used in the [tutorial](usage.md#building-the-firmware).
-* **Check libraries**. Install all the required libraries from the tutorial. Make sure there are no MPU9250 or other peripherals libraries that may conflict with the ones used in the tutorial.
+* **Check libraries**. Install all the required libraries from the tutorial. Make sure there are no MPU-9250 or other peripherals libraries that may conflict with the ones used in the tutorial.
 * **Check the chosen board**. The correct board to choose in Arduino IDE for ESP32 Mini is *WEMOS D1 MINI ESP32*.
 
 ## The drone doesn't fly

docs/usage.md

@@ -20,13 +20,14 @@ You can build and upload the firmware using either **Arduino IDE** (easier for b
 
 1. Install [Arduino IDE](https://www.arduino.cc/en/software) (version 2 is recommended).
 2. *Windows users might need to install [USB to UART bridge driver from Silicon Labs](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers).*
-3. Install ESP32 core, version 3.3.6. See the [official Espressif's instructions](https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html#installing-using-arduino-ide) on installing ESP32 Core in Arduino IDE.
+3. Install ESP32 core, version 3.3.10. See the [official Espressif's instructions](https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html#installing-using-arduino-ide) on installing ESP32 Core in Arduino IDE.
 4. Install the following libraries using [Library Manager](https://docs.arduino.cc/software/ide-v2/tutorials/ide-v2-installing-a-library):
    * `FlixPeriph`, the latest version.
    * `MAVLink`, version 2.0.25.
 5. Open the `flix/flix.ino` sketch from downloaded firmware sources in Arduino IDE.
 6. Connect your ESP32 board to the computer and choose correct board type in Arduino IDE (*WEMOS D1 MINI ESP32* for ESP32 Mini) and the port.
-7. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.
+7. Set *Tools* ⇒ *Core Debug Level* to *Error* to see the errors in the serial console. Set *Tools* ⇒ *USB CDC on Boot* to *Enabled* for ESP32-S3/ESP32-C3 boards.
+8. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.
 
 ### Command line (Windows, Linux, macOS)
 
@@ -57,6 +58,12 @@ You can build and upload the firmware using either **Arduino IDE** (easier for b
    make upload monitor
    ```
 
+   For ESP32-S3/ESP32-C3 boards, set the appropriate [FQBN](https://docs.arduino.cc/arduino-cli/FAQ/#whats-the-fqbn-string) using `BOARD` parameter:
+
+   ```bash
+   make BOARD=esp32:esp32:esp32s3:DebugLevel=error,FlashSize=4M,CDCOnBoot=cdc upload
+   ```
+
 See other available Make commands in [Makefile](../Makefile).
 
 > [!TIP]
@@ -82,6 +89,9 @@ QGroundControl is a ground control station software that can be used to monitor
 3. Connect your computer or smartphone to the appeared `flix` Wi-Fi network (password: `flixwifi`).
 4. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.
 
+> [!TIP]
+> If QGroundControl doesn't connect, try to disable the firewall and/or VPN on your computer, as they may block the connection.
+
 ### Access console
 
 The console is a command line interface (CLI) that allows to interact with the drone, change parameters, and perform various actions. There are two ways of accessing the console: using **serial port** or using **QGroundControl (wirelessly)**.
@@ -329,7 +339,7 @@ To setup ESP-NOW communication:
    espnow 7a:c8:e3:eb:bf:e9 &PiuSysxP9+$L&5E
    ```
 
-   Run this line as a console command on each drone you want to bind to this proxy board.
+   Run this line as a console command on each drone you want to bind to this proxy board. [The maximum number](https://github.com/espressif/esp-idf/blob/e95cab4be8fd293e3f3323181e7a2280874da6f7/components/esp_wifi/include/esp_now.h#L32-L33) of simultaneously connected drones is 20 (unencrypted) io 6 (encrypted).
 
 3. Set the `WIFI_MODE` parameter to `3` on the drone:
 

docs/user.md

@@ -4,6 +4,36 @@ This page contains user-built drones based on the Flix project. Publish your pro
 
 ---
 
+Author: [Неруш Михаил](https://t.me/NerushMV).<br>
+Description: custom frame made of 4 mm plywood, 8520 brushed motors, 75 mm propellers, MPU-6500. FlySky FS-i6X with ESP32-based adapter for ESP-NOW communication (using PPM output).
+
+<img src="img/user/nerush/1.jpg" height=200> <img src="img/user/nerush/2.jpg" height=200>
+
+[Flight video](https://drive.google.com/file/d/1jRXeGx34lJpUfw0GKLQeIzkWZvooQJSE/view?usp=sharing).
+
+---
+
+Author: [Konstantinos Paraskevas](https://github.com/Frapais).<br>
+Description: drone with a custom single-boarded airframe, extending the [Sprig-C3 module](https://github.com/Frapais/Sprig-C3).
+ESP32-C3 microcontroller, ICM-20948 IMU, on-board fuel-gauge, status LED indicator.<br>
+Repository with all the code and PCB sources: https://github.com/Frapais/Sprig-Drone.
+
+<img src="img/user/kostas/1.jpg" height=150> <img src="img/user/kostas/2.jpg" height=150>
+
+Detailed video about making the drone:
+
+<a href="https://youtu.be/82Q-uBq6s48"><img width=400 src="https://i3.ytimg.com/vi/82Q-uBq6s48/maxresdefault.jpg"></a>
+
+---
+
+Author: [Awab Anas](http://t.me/AW_VENOM).<br>
+Description: ESP32 D1 Mini, MPU-6050, 8520 3.7V brushed motors, 55 mm propellers, battery li-po 1200 mAh, controlling via [Mavlink Joystick app](https://github.com/goldarte/mavlink-joystick/releases/latest).<br>
+[Flight validation](https://drive.google.com/file/d/12z0jfctZDBA6b5UKCG0Uje5rAxj6DhF-/view?usp=sharing).
+
+<img src="img/user/aw_venom/1.jpg" height=200>
+
+---
+
 Author: [Ina Tix](https://t.me/ina_tix).<br>
 Description: XR2981 based DC-DC converter, ELRS MINI 2.4GHz RX SX1280 receiver (SBUS interface), Radiomaster TX12 remote control.<br>
 [Flight validation](https://drive.google.com/file/d/1yqkKNuz4R_yxGqUNQxVpixJbXqEEcUSj/view?usp=share_link).
@@ -57,6 +87,17 @@ Author: [goldarte](https://t.me/goldarte).<br>
 
 ---
 
+Author: [malagis](https://oshwhub.com/malagis).<br>
+
+A Chinese custom PCB version of Flix with a big community of users, lots of materials and modifications.
+
+Main project's page: https://oshwhub.com/malagis/esp32-mini-plane.<br>
+Video about the project: https://www.bilibili.com/video/BV14vyqBFEJn/.
+
+<img src="img/user/malagis/1.jpg" height=200> <img src="img/user/malagis/2.jpg" height=200> <img src="img/user/malagis/3.jpg" height=200>
+
+---
+
 ## School 548 course
 
 Special course on quadcopter design and engineering took place in october-november 2025 in School 548, Moscow. The course included UAV control theory, electronics, drone assembly and setup practice, using the Flix project.

flix/cli.ino

@@ -31,33 +31,33 @@ const char* motd =
 "Commands:\n\n"
 "help - show help\n"
 "p - show all parameters\n"
-"p <name> - show parameter\n"
+"p <str> - show parameters starting with str\n"
 "p <name> <value> - set parameter\n"
 "preset - reset parameters\n"
 "time - show time info\n"
-"ps - show pitch/roll/yaw\n"
-"psq - show attitude quaternion\n"
 "imu - show IMU data\n"
+"ca - calibrate accel\n"
+"st - show state estimation\n"
 "arm - arm the drone\n"
 "disarm - disarm the drone\n"
 "raw/stab/acro/auto - set mode\n"
 "rc - show RC data\n"
+"cr - calibrate RC\n"
 "pw - show power info\n"
 "wifi - show Wi-Fi info\n"
-"ap <ssid> <password> - setup Wi-Fi access point\n"
-"sta <ssid> <password> - setup Wi-Fi client mode\n"
-"espnow <mac> [<key>] - setup ESP-NOW peer\n"
+"wifi ap/sta/espnow/off - set Wi-Fi mode\n"
+"ap <ssid> <password> - configure Wi-Fi access point\n"
+"sta <ssid> <password> - configure Wi-Fi client mode\n"
+"espnow <mac> [<key>] - configure ESP-NOW peer\n"
 "mot - show motor output\n"
 "log [dump] - print log header [and data]\n"
-"cr - calibrate RC\n"
-"ca - calibrate accel\n"
 "mfr, mfl, mrr, mrl - test motor (remove props)\n"
 "sys - show system info\n"
 "reset - reset drone's state\n"
 "reboot - reboot the drone\n";
 
 void print(const char* format, ...) {
-	char buf[1000];
+	char buf[3000];
 	va_list args;
 	va_start(args, format);
 	vsnprintf(buf, sizeof(buf), format, args);
@@ -92,10 +92,8 @@ void doCommand(String str, bool echo = false) {
 	// execute command
 	if (command == "help" || command == "motd") {
 		print("%s\n", motd);
-	} else if (command == "p" && arg0 == "") {
-		printParameters();
-	} else if (command == "p" && arg0 != "" && arg1 == "") {
-		print("%s = %g\n", arg0.c_str(), getParameter(arg0.c_str()));
+	} else if (command == "p" && arg1 == "") {
+		printParameters(arg0.c_str());
 	} else if (command == "p") {
 		bool success = setParameter(arg0.c_str(), arg1.toFloat());
 		if (success) {
@@ -109,15 +107,15 @@ void doCommand(String str, bool echo = false) {
 		print("Time: %f\n", t);
 		print("Loop rate: %.0f\n", loopRate);
 		print("dt: %f\n", dt);
-	} else if (command == "ps") {
-		Vector a = attitude.toEuler();
-		print("roll: %f pitch: %f yaw: %f\n", degrees(a.x), degrees(a.y), degrees(a.z));
-	} else if (command == "psq") {
-		print("qw: %f qx: %f qy: %f qz: %f\n", attitude.w, attitude.x, attitude.y, attitude.z);
 	} else if (command == "imu") {
 		printIMUInfo();
 		printIMUCalibration();
 		print("landed: %d\n", landed);
+	} else if (command == "st") {
+		print("rates: %g %g %g\n", rates.x, rates.y, rates.z);
+		print("attitude: %g %g %g %g\n", attitude.w, attitude.x, attitude.y, attitude.z);
+		print("roll: %g° pitch: %g° yaw: %g°\n", degrees(attitude.getRoll()), degrees(attitude.getPitch()), degrees(attitude.getYaw()));
+		print("landed: %d\n", landed);
 	} else if (command == "arm") {
 		armed = true;
 	} else if (command == "disarm") {
@@ -142,8 +140,10 @@ void doCommand(String str, bool echo = false) {
 		print("armed: %d\n", armed);
 	} else if (command == "pw") {
 		print("Voltage: %.1f V\n", voltage);
-	} else if (command == "wifi") {
+	} else if (command == "wifi" && arg0 == "") {
 		printWiFiInfo();
+	} else if (command == "wifi") {
+		setWiFiMode(arg0);
 	} else if (command == "ap") {
 		configWiFi(W_AP, arg0.c_str(), arg1.c_str());
 	} else if (command == "sta") {
@@ -172,10 +172,11 @@ void doCommand(String str, bool echo = false) {
 #ifdef ESP32
 		print("Chip: %s\n", ESP.getChipModel());
 		print("Temperature: %.1f °C\n", temperatureRead());
-		print("Free heap: %d\n", ESP.getFreeHeap());
+		print("Total RAM: %d KB\n", ESP.getHeapSize() / 1024);
+		print("Free heap: %d KB\n", ESP.getFreeHeap() / 1024);
 		print("Firmware: " __DATE__ " " __TIME__ "\n");
 		// Print tasks table
-		print("Num  Task                Stack  Prio  Core  CPU%%\n");
+		print("Num  Task                MinSt  Prio  Core  CPU%%\n");
 		int taskCount = uxTaskGetNumberOfTasks();
 		TaskStatus_t *systemState = new TaskStatus_t[taskCount];
 		uint32_t totalRunTime;
@@ -209,7 +210,7 @@ void handleInput() {
 
 	while (Serial.available()) {
 		char c = Serial.read();
-		if (c == '\n') {
+		if (c == '\n' || c == '\r') {
 			doCommand(input);
 			input.clear();
 		} else {

flix/control.ino

@@ -149,6 +149,7 @@ void controlTorque() {
 	motors[MOTOR_REAR_LEFT] = thrustTarget + torqueTarget.x + torqueTarget.y - torqueTarget.z;
 	motors[MOTOR_REAR_RIGHT] = thrustTarget - torqueTarget.x + torqueTarget.y + torqueTarget.z;
 
+	// Prioritize angle control over thrust control
 	desaturate(motors[MOTOR_FRONT_LEFT], motors[MOTOR_FRONT_RIGHT], motors[MOTOR_REAR_LEFT], motors[MOTOR_REAR_RIGHT]);
 
 	motors[0] = constrain(motors[0], 0, 1);

flix/estimate.ino

@@ -32,8 +32,7 @@ void applyGyro() {
 
 void applyAcc() {
 	// test should we apply accelerometer gravity correction
-	float accNorm = acc.norm();
-	landed = !motorsActive() && abs(accNorm - ONE_G) < ONE_G * 0.1f;
+	landed = !motorsActive() && abs(acc.norm() - ONE_G) < ONE_G * 0.1f;
 
 	if (!landed) return;
 
@@ -47,6 +46,7 @@ void applyAcc() {
 
 void applyLevel() {
 	if (landed) return;
+	if (thrustTarget < 0.1) return; // skip at idle thrust
 
 	// assume the pilot keeps the drone more or less level in flight
 	Vector up = Quaternion::rotateVector(Vector(0, 0, 1), attitude);

flix/imu.ino

@@ -40,10 +40,12 @@ void readIMU() {
 	imu.getGyro(gyro.x, gyro.y, gyro.z);
 	imu.getAccel(acc.x, acc.y, acc.z);
 	calibrateGyroOnce();
-	// apply scale and bias
+
+	// Apply scale and bias
 	acc = (acc - accBias) / accScale;
 	gyro = gyro - gyroBias;
-	// rotate to body frame
+
+	// Rotate to body frame
 	Quaternion rotation = Quaternion::fromEuler(imuRotation);
 	acc = Quaternion::rotateVector(acc, rotation.inversed());
 	gyro = Quaternion::rotateVector(gyro, rotation.inversed());
@@ -52,6 +54,7 @@ void readIMU() {
 void calibrateGyroOnce() {
 	static Delay landedDelay(2);
 	if (!landedDelay.update(landed)) return; // calibrate only if definitely stationary
+
 	gyroBias = gyroBiasFilter.update(gyro);
 }
 
@@ -105,6 +108,7 @@ void calibrateAccelOnce() {
 	if (acc.x < accMin.x) accMin.x = acc.x;
 	if (acc.y < accMin.y) accMin.y = acc.y;
 	if (acc.z < accMin.z) accMin.z = acc.z;
+
 	// Compute scale and bias
 	accScale = (accMax - accMin) / 2 / ONE_G;
 	accBias = (accMax + accMin) / 2;
@@ -121,6 +125,7 @@ void printIMUInfo() {
 	print("model: %s\n", imu.getModel());
 	print("who am I: 0x%02X\n", imu.whoAmI());
 	print("rate: %.0f\n", loopRate);
+	print("temperature: %.1f °C\n", imu.getTemp());
 	print("gyro: %f %f %f\n", gyro.x, gyro.y, gyro.z);
 	print("acc: %f %f %f\n", acc.x, acc.y, acc.z);
 	imu.waitForData();

flix/mavlink.ino

@@ -10,8 +10,12 @@ extern float controlTime;
 extern float voltage;
 
 int mavlinkSysId = 1;
-Rate telemetryFast(10);
+
 Rate telemetrySlow(2);
+Rate telemetryAttitude(20);
+Rate telemetryRC(10);
+Rate telemetryMotors(10);
+Rate telemetryIMU(15);
 
 bool mavlinkConnected = false;
 String mavlinkPrintBuffer;
@@ -34,36 +38,46 @@ void sendMavlink() {
 			((mode == AUTO) ? MAV_MODE_FLAG_AUTO_ENABLED : MAV_MODE_FLAG_MANUAL_INPUT_ENABLED),
 			mode, MAV_STATE_STANDBY);
 		sendMessage(&msg);
+	}
 
-		if (!mavlinkConnected) return; // send only heartbeat until connected
+	if (!mavlinkConnected) return; // send only heartbeat until connected
 
+	if (telemetrySlow) {
 		mavlink_msg_extended_sys_state_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			MAV_VTOL_STATE_UNDEFINED, landed ? MAV_LANDED_STATE_ON_GROUND : MAV_LANDED_STATE_IN_AIR);
 		sendMessage(&msg);
+	}
 
-		uint16_t voltages[] = {voltage * 1000, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX};
+	if (telemetrySlow && valid(voltage)) {
+		uint16_t voltages[] = {(uint16_t)(voltage * 1000), UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX, UINT16_MAX};
 		uint16_t voltagesExt[] = {0, 0, 0, 0};
 		float remaining = constrain(mapf(voltage, 3.4, 4.2, 0, 1), 0, 1);
 		mavlink_msg_battery_status_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, 0, MAV_BATTERY_FUNCTION_ALL,
 			MAV_BATTERY_TYPE_LIPO, INT16_MAX, voltages, -1, -1, -1, remaining * 100, 0, MAV_BATTERY_CHARGE_STATE_OK, voltagesExt, 0, 0);
-		if (valid(voltage)) sendMessage(&msg);
+		sendMessage(&msg);
 	}
 
-	if (telemetryFast && mavlinkConnected) {
+	if (telemetryAttitude) {
 		const float offset[] = {0, 0, 0, 0};
 		mavlink_msg_attitude_quaternion_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
 			time, attitude.w, attitude.x, -attitude.y, -attitude.z, rates.x, -rates.y, -rates.z, offset); // convert to frd
 		sendMessage(&msg);
+	}
 
+	if (telemetryRC && channels[0]) { // 0 means no RC input
 		mavlink_msg_rc_channels_raw_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, controlTime * 1000, 0,
 			channels[0], channels[1], channels[2], channels[3], channels[4], channels[5], channels[6], channels[7], UINT8_MAX);
-		if (channels[0] != 0) sendMessage(&msg); // 0 means no RC input
+		sendMessage(&msg);
+	}
 
+	if (telemetryMotors) {
 		float controls[8];
 		memcpy(controls, motors, sizeof(motors));
 		mavlink_msg_actuator_control_target_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, time, 0, controls);
 		sendMessage(&msg);
+	}
 
+	if (telemetryIMU) {
 		mavlink_msg_scaled_imu_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, time,
 			acc.x / ONE_G * 1000, -acc.y / ONE_G * 1000, -acc.z / ONE_G * 1000, // convert to frd
 			gyro.x * 1000, -gyro.y * 1000, -gyro.z * 1000,
@@ -81,13 +95,13 @@ void sendMessage(const void *msg) {
 void receiveMavlink() {
 	uint8_t buf[MAVLINK_MAX_PACKET_LEN];
 	int len = receiveWiFi(buf, MAVLINK_MAX_PACKET_LEN);
-	if (len) mavlinkConnected = true;
 
 	// New packet, parse it
 	mavlink_message_t msg;
 	mavlink_status_t status;
 	for (int i = 0; i < len; i++) {
 		if (mavlink_parse_char(MAVLINK_COMM_0, buf[i], &msg, &status)) {
+			mavlinkConnected = true;
 			handleMavlink(&msg);
 		}
 	}
@@ -241,7 +255,7 @@ void handleMavlink(const void *_msg) {
 		}
 
 		if (m.command == MAV_CMD_COMPONENT_ARM_DISARM) {
-			if (m.param1 && controlThrottle > 0.05) return; // don't arm if throttle is not low
+			if (m.param1 == 1 && controlThrottle > 0.05) return; // don't arm if throttle is not low
 			accepted = true;
 			armed = m.param1 == 1;
 		}

flix/motors.ino

@@ -14,15 +14,13 @@ int pwmStop = 0;
 int pwmMin = 0;
 int pwmMax = -1; // -1 means duty cycle mode
 
-const int MOTOR_REAR_LEFT = 0;
-const int MOTOR_REAR_RIGHT = 1;
-const int MOTOR_FRONT_RIGHT = 2;
-const int MOTOR_FRONT_LEFT = 3;
+const int MOTOR_REAR_LEFT = 0, MOTOR_REAR_RIGHT = 1, MOTOR_FRONT_RIGHT = 2, MOTOR_FRONT_LEFT = 3;
 
 void setupMotors() {
 	print("Setup Motors\n");
-	// configure pins
+	// Configure pins
 	for (int i = 0; i < 4; i++) {
+		if (motorPins[i] < 0) continue; // skip unassigned motors
 		ledcAttach(motorPins[i], pwmFrequency, pwmResolution);
 		pwmFrequency = ledcChangeFrequency(motorPins[i], pwmFrequency, pwmResolution); // when reconfiguring
 	}
@@ -32,12 +30,14 @@ void setupMotors() {
 
 void sendMotors() {
 	for (int i = 0; i < 4; i++) {
+		if (motorPins[i] < 0) continue; // skip unassigned motors
 		ledcWrite(motorPins[i], getDutyCycle(motors[i]));
 	}
 }
 
 int getDutyCycle(float value) {
 	value = constrain(value, 0, 1);
+
 	if (pwmMax >= 0) { // pwm mode
 		float pwm = mapf(value, 0, 1, pwmMin, pwmMax);
 		if (value == 0) pwm = pwmStop;

flix/parameters.ino

@@ -6,13 +6,11 @@
 #include <Preferences.h>
 #include "util.h"
 
-extern int channelZero[16];
-extern int channelMax[16];
+extern int channelZero[16], channelMax[16];
 extern int rollChannel, pitchChannel, throttleChannel, yawChannel, armedChannel, modeChannel;
-extern int rcRxPin;
+extern int rcRxPin, voltagePin;
 extern int wifiMode, wifiLongRange, udpLocalPort, udpRemotePort, espnowChannel;
 extern float rcLossTimeout, descendTime;
-extern int voltagePin;
 extern float voltageScale;
 extern LowPassFilter<float> voltageFilter;
 
@@ -22,6 +20,7 @@ struct Parameter {
 	const char *name; // max length is 15
 	bool integer;
 	union { float *f; int *i; }; // pointer to the variable
+	float inital; // default value
 	float cache; // what's stored in flash
 	void (*callback)(); // called after parameter change
 	Parameter(const char *name, float *variable, void (*callback)() = nullptr) : name(name), integer(false), f(variable), callback(callback) {};
@@ -118,7 +117,10 @@ Parameter parameters[] = {
 	// mavlink
 	{"MAV_SYS_ID", &mavlinkSysId},
 	{"MAV_RATE_SLOW", &telemetrySlow.rate},
-	{"MAV_RATE_FAST", &telemetryFast.rate},
+	{"MAV_RATE_ATT", &telemetryAttitude.rate},
+	{"MAV_RATE_RC", &telemetryRC.rate},
+	{"MAV_RATE_MOT", &telemetryMotors.rate},
+	{"MAV_RATE_IMU", &telemetryIMU.rate},
 	// power
 	{"PWR_VOLT_PIN", &voltagePin, setupPower},
 	{"PWR_VOLT_SCALE", &voltageScale},
@@ -136,6 +138,7 @@ void setupParameters() {
 		if (!storage.isKey(parameter.name)) {
 			storage.putFloat(parameter.name, parameter.getValue()); // store default value
 		}
+		parameter.inital = parameter.getValue();
 		parameter.setValue(storage.getFloat(parameter.name, 0));
 		parameter.cache = parameter.getValue();
 	}
@@ -182,17 +185,23 @@ void syncParameters() {
 	if (motorsActive()) return; // don't use flash while flying, it may cause a delay
 
 	for (auto &parameter : parameters) {
-		if (parameter.getValue() == parameter.cache) continue; // no change
-		if (isnan(parameter.getValue()) && isnan(parameter.cache)) continue; // both are NAN
+		if (floatEquals(parameter.getValue(), parameter.cache)) continue; // no change
 
 		storage.putFloat(parameter.name, parameter.getValue());
 		parameter.cache = parameter.getValue(); // update cache
 	}
 }
 
-void printParameters() {
+void printParameters(const char *filter) {
+	print("Name             Value          [Default]\n");
 	for (auto &parameter : parameters) {
-		print("%s = %g\n", parameter.name, parameter.getValue());
+		if (strncasecmp(parameter.name, filter, strlen(filter))) continue;
+
+		if (floatEquals(parameter.getValue(), parameter.inital)) { // parameter changed
+			print("%-15s  %-13g\n", parameter.name, parameter.getValue());
+		} else {
+			print("%-15s  %-13g  [%g]\n", parameter.name, parameter.getValue(), parameter.inital);
+		}
 	}
 }
 

flix/power.ino

@@ -20,6 +20,7 @@ void setupPower() {
 
 void readVoltage() {
 	if (voltagePin < 0) return;
+
 	static Rate rate(10);
 	if (!rate) return;
 

flix/rc.ino

@@ -27,14 +27,12 @@ void setupRC() {
 
 bool readRC() {
 	if (rcRxPin < 0) return false;
-	if (rc.read()) {
-		SBUSData data = rc.data();
-		for (int i = 0; i < 16; i++) channels[i] = data.ch[i]; // copy channels data
-		normalizeRC();
-		controlTime = t;
-		return true;
-	}
-	return false;
+	if (!rc.read()) return false;
+
+	rc.getChannels(channels);
+	normalizeRC();
+	controlTime = t;
+	return true;
 }
 
 void normalizeRC() {
@@ -55,6 +53,7 @@ void calibrateRC() {
 		print("RC_RX_PIN = %d, set the RC pin!\n", rcRxPin);
 		return;
 	}
+
 	uint16_t zero[16]; // for zero positions
 	uint16_t center[16]; // for center positions
 	uint16_t _[16]; // for unused data

flix/util.h

@@ -23,6 +23,12 @@ bool valid(float x) {
 	return isfinite(x);
 }
 
+bool floatEquals(float a, float b, float epsilon = 0) {
+	if (isnan(a) && isnan(b)) return true;
+	if (a == b) return true;
+	return fabsf(a - b) <= epsilon;
+}
+
 // Wrap angle to [-PI, PI)
 float wrapAngle(float angle) {
 	angle = fmodf(angle, 2 * PI);
@@ -47,13 +53,14 @@ void splitString(String& str, String& token0, String& token1, String& token2) {
 	if (token2.c_str() == NULL) token2 = "";
 }
 
-// Simplified ESP-NOW Serial without tx buffering and resends
+// Simplified ESP-NOW Serial without resends
 class ESPNOWSerial : public ESP_NOW_Serial_Class {
 public:
+	int lost = 0;
 	using ESP_NOW_Serial_Class::ESP_NOW_Serial_Class;
-	void onSent(bool success) override {} // disable resends
-	size_t write(const uint8_t *data, size_t len) override {
-		return ESP_NOW_Peer::send(data, len); // pure send without buffering
+	void onSent(bool success) override {
+		if (!success) lost++;
+		ESP_NOW_Serial_Class::onSent(true); // always report success to avoid resends
 	}
 };
 
@@ -65,6 +72,9 @@ public:
 	Rate(float rate) : rate(rate) {}
 
 	operator bool() {
+		if (t == last) {
+			return true; // the same step
+		}
 		if (t - last >= 1 / rate) {
 			last = t;
 			return true;

flix/wifi.ino

@@ -8,7 +8,7 @@
 #include <WiFiUdp.h>
 #include <MacAddress.h>
 #include <ESP32_NOW_Serial.h>
-#include "Preferences.h"
+#include <Preferences.h>
 #include "util.h"
 
 extern Preferences storage; // use the main preferences storage
@@ -33,10 +33,14 @@ void setupWiFi() {
 	if (wifiMode == W_AP) {
 		WiFi.softAP(storage.getString("WIFI_AP_SSID", "flix").c_str(), storage.getString("WIFI_AP_PASS", "flixwifi").c_str());
 		udp.begin(udpLocalPort);
-	} else if (wifiMode == W_STA) {
+	}
+
+	if (wifiMode == W_STA) {
 		WiFi.begin(storage.getString("WIFI_STA_SSID", "").c_str(), storage.getString("WIFI_STA_PASS", "").c_str());
 		udp.begin(udpLocalPort);
-	} else if (wifiMode == W_ESPNOW) {
+	}
+
+	if (wifiMode == W_ESPNOW) {
 		WiFi.mode(WIFI_AP);
 		WiFi.setChannel(espnowChannel);
 		espnow.addr(MacAddress(storage.getString("ESPNOW_PEER_MAC", "FF:FF:FF:FF:FF:FF").c_str()));
@@ -52,6 +56,7 @@ void setupWiFi() {
 void sendWiFi(const uint8_t *buf, int len) {
 	if (espnow) {
 		espnow.write(buf, len);
+
 		static Rate discovery(2);
 		if (discovery) espnowBroadcast.write((const uint8_t *)"flix", 4); // broadcast message to help finding this device
 		return;
@@ -85,6 +90,7 @@ void printWiFiInfo() {
 		print("Peer MAC: %s\n", MacAddress(espnow.addr()).toString().c_str());
 		print("Encrypted: %d\n", espnow.isEncrypted());
 		print("Channel: %d\n", espnow.getChannel());
+		print("Lost packets: %d\n", espnow.lost);
 	} else if (WiFi.getMode() == WIFI_MODE_AP) {
 		print("Mode: Access Point (AP)\n");
 		print("MAC: %s\n", WiFi.softAPmacAddress().c_str());
@@ -127,3 +133,20 @@ void configWiFi(int mode, const char *first, const char *second) {
 	}
 	print("✓ Reboot to apply new settings\n");
 }
+
+void setWiFiMode(const String& mode) {
+	if (mode == "ap") {
+		wifiMode = W_AP;
+	} else if (mode == "sta") {
+		wifiMode = W_STA;
+	} else if (mode == "espnow") {
+		wifiMode = W_ESPNOW;
+	} else if (mode == "off") {
+		wifiMode = W_DISABLED;
+	} else {
+		print("Invalid Wi-Fi mode\n");
+		return;
+	}
+	static const char *modes[] = {"Disabled", "Access Point (AP)", "Client (STA)", "ESP-NOW"};
+	print("✓ Wi-Fi mode set to %s, reboot to apply\n", modes[wifiMode]);
+}

gazebo/SBUS.h

@@ -15,12 +15,11 @@ public:
 	SBUS(HardwareSerial& bus, const int8_t rxpin, const int8_t txpin, const bool inv = true) {};
 	void begin(int rxpin = -1, int txpin = -1, bool inv = true, bool fast = false) {};
 	bool read() { return joystickInit(); };
-	SBUSData data() {
-		SBUSData data;
-		joystickGet(data.ch);
+	void getChannels(uint16_t (&channels)[16]) const {
+		int16_t ch[16];
+		joystickGet(ch);
 		for (int i = 0; i < 16; i++) {
-			data.ch[i] = map(data.ch[i], -32768, 32767, 1000, 2000); // convert to pulse width style
+			channels[i] = map(ch[i], -32768, 32767, 1000, 2000); // convert to pulse width style
 		}
-		return data;
 	};
 };

gazebo/flix.h

@@ -68,7 +68,7 @@ const char *getParameterName(int index);
 float getParameter(int index);
 float getParameter(const char *name);
 bool setParameter(const char *name, const float value);
-void printParameters();
+void printParameters(const char *filter);
 void resetParameters();
 
 // mocks
@@ -79,3 +79,4 @@ void printIMUCalibration() { print("cal: N/A\n"); };
 void printIMUInfo() {};
 void printWiFiInfo() {};
 void configWiFi(bool, const char*, const char*) { print("Skip WiFi config\n"); };
+void setWiFiMode(const String& mode) { print("Skip WiFi mode set\n"); };

gazebo/wifi.h

@@ -11,7 +11,12 @@
 #include <sys/poll.h>
 #include <gazebo/gazebo.hh>
 
-int wifiMode = 1; // mock
+// Mocks
+int wifiMode = 1;
+int wifiLongRange = 0;
+int espnowChannel = 6;
+const int W_DISABLED = 0, W_AP = 1, W_STA = 2, W_ESPNOW = 3;
+
 int udpLocalPort = 14580;
 int udpRemotePort = 14550;
 const char *udpRemoteIP = "255.255.255.255";

tools/pyflix/README.md

@@ -28,6 +28,8 @@ from pyflix import Flix
 flix = Flix()  # create a Flix object and wait for connection
 ```
 
+If using ESP-NOW connection, specify the proxy device name in `FLIX_DEVICE` environment variable or pass it to the constructor: `Flix(device='/dev/cu.usbserial-0001')`.
+
 ### Telemetry
 
 Basic telemetry is available through object properties. The property names generally match the corresponding variables in the firmware code:

tools/pyflix/flix.py

@@ -44,22 +44,27 @@ class Flix:
     _print_buffer: str = ''
     _modes = ['RAW', 'ACRO', 'STAB', 'AUTO']
 
-    def __init__(self, system_id: int=1, wait_connection: bool=True):
+    def __init__(self, system_id: int=1, wait_connection: bool=True, device=os.getenv('FLIX_DEVICE')):
         if not (0 <= system_id < 256):
             raise ValueError('system_id must be in range [0, 255]')
         self._setup_mavlink()
         self.system_id = system_id
         self._init_state()
-        try:
-            # Direct connection
-            logger.debug('Listening on port 14550')
-            self.connection: mavutil.mavfile = mavutil.mavlink_connection('udpin:0.0.0.0:14550', source_system=255)  # type: ignore
-        except OSError as e:
-            if e.errno != errno.EADDRINUSE:
-                raise
-            # Port busy - using proxy
-            logger.debug('Listening on port 14555 (proxy)')
-            self.connection: mavutil.mavfile = mavutil.mavlink_connection('udpin:0.0.0.0:14555', source_system=254)  # type: ignore
+        if device is not None:
+            # User defined connection
+            logger.debug(f'Connecting to {device}')
+            self.connection: mavutil.mavfile = mavutil.mavlink_connection(device, source_system=255)  # type: ignore
+        else:
+            try:
+                # Direct connection
+                logger.debug('Listening on port 14550')
+                self.connection: mavutil.mavfile = mavutil.mavlink_connection('udpin:0.0.0.0:14550', source_system=255)  # type: ignore
+            except OSError as e:
+                if e.errno != errno.EADDRINUSE:
+                    raise
+                # Port busy - using proxy
+                logger.debug('Listening on port 14555 (proxy)')
+                self.connection: mavutil.mavfile = mavutil.mavlink_connection('udpin:0.0.0.0:14555', source_system=254)  # type: ignore
         self.connection.target_system = system_id
         self.mavlink: mavlink.MAVLink = self.connection.mav
         self._event_listeners: Dict[str, List[Callable[..., Any]]] = {}

tools/pyproject.toml

@@ -1,6 +1,6 @@
 [project]
 name = "pyflix"
-version = "0.15"
+version = "0.16"
 description = "Python API for Flix drone"
 authors = [{ name="Oleg Kalachev", email="okalachev@gmail.com" }]
 license = "MIT"