Add power subsystem.
Add PWR_VOLT_PIN, PWR_VOLT_SCALE, PWR_VOLT_LPF_A parameters.
Support BATTERY_STATUS mavlink messages streaming.
Add pw cli command.
Add voltage field to pyflix library.
pyflix@0.12.
As it makes the subsystems code easier to understand.
Declare the most used variables in main sketch file as forward declarations.
Make all control input zero by default (except controlMode).
Minor changes.
Use MAVLink LOG_REQUEST_DATA and LOG_DATA for download log instead of console.
Make Wi-Fi download default way of downloading the log.
Make `log` command only print the header and `log dump` dump the log.
Support SET_ATTITUDE_TARGET, SET_ACTUATOR_CONTROL_TARGET in mavlink.
ACTUATOR_OUTPUT_STATUS is changed ACTUATOR_CONTROL_TARGET to match used message for setting motor outputs.
Add support for changing mode from mavlink.
Support automatic flights in pyflix.
Arm and disarm with gestures only: left stick right/down for arming, left/down for disarming.
Remove arming switch as it complicates arming gestures logic.
Remove MAV_CTRL_SCALE parameter as it complicates arming gestures logic, advise to decrease TILT_MAX when controlling with a smartphone.
Put some minimal thrust to motors to indicate armed state.
Rename build article to usage article, add flight instructions.
Implement channels mapping calibration.
Store mapping in parameters.
Get rid of `controls` array and store control inputs in `controlRoll`, `controlPitch`, ... variables.
Move `channels` variable to rc.ino, channels are not involved when controled using mavlink.
'Neutral' values are renamed to 'zero' - more precise naming.
`controlsTime` is renamed to `controlTime`.
Use unsigned values for channels.
Make channel values in simulation more alike to real world: unsigned values in range [1000, 2000].
Send RC_CHANNELS_RAW instead of RC_CHANNELS_SCALED via mavlink
Don't send channels data via mavlink if rc is not used
Fix disconnecting from qgc while pausing in the simulation.
Consider total delay time in micros() in simulation to increase t while delaying.
Simplify and get rid of ARDUINO macro check.
Make the order or basic methods consistent between Vector and Quaternion.
Remove `ZYX` from Euler method names as this is standard for robotics.
Rename angular rates to rotation vector, which is more correct.
Make rotation methods static, to keep the arguments order consistent.
Make `Quaternion::fromAxisAngle` accept Vector for axis.
Minor fixes.
Implement pause function that proceeds processing mavlink.
Use temporal workaround for simulation, as micros function gives the same result on the same simulation step.
Move command parsing to doCommand
Parse command with splitString instead of stringToken
Trim commands
Move cliTestMotor to the bottom
Rename parseInput to handleInput, which is more clear
Move motor test function to motors.ino
Oleg Kalachev
