Enable motor pins only for classic esp32 by default

Also simplify flix2 config code.

.github/workflows/build.yml

@@ -13,7 +13,7 @@ jobs:
     env:
         ARDUINO_SKETCH_ALWAYS_EXPORT_BINARIES: 1
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Arduino CLI
       run: curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | BINDIR=/usr/local/bin sh
     - name: Build firmware for ESP32
@@ -27,9 +27,9 @@ jobs:
     - name: Build firmware for ESP32-S3 with OPI PSRAM
       run: make BOARD=esp32:esp32:esp32s3:CDCOnBoot=cdc,PSRAM=opi EXTRA=--output-dir=flix/build/esp32.esp32.esp32s3.opi
     - name: Build firmware for Flix2
-      run: make BOARD=esp32:esp32:esp32s3:FlashSize=4M,CDCOnBoot=cdc,PSRAM=opi EXTRA='--build-property "compiler.cpp.extra_flags=-DFLIX2" --output-dir=flix/build/esp32.esp32.flix2'
+      run: make BOARD=esp32:esp32:esp32s3:FlashSize=4M,CDCOnBoot=cdc,PSRAM=opi FLAGS=-DFLIX2 EXTRA=--output-dir=flix/build/esp32.esp32.flix2
     - name: Upload binaries
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v7
       with:
         name: firmware-binary
         path: flix/build
@@ -41,7 +41,7 @@ jobs:
   build_macos:
     runs-on: macos-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Arduino CLI
       run: brew install arduino-cli
     - name: Build firmware
@@ -52,7 +52,7 @@ jobs:
   build_windows:
     runs-on: windows-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Arduino CLI
       run: choco install arduino-cli
     - name: Install Make
@@ -73,7 +73,7 @@ jobs:
         DEBIAN_FRONTEND=noninteractive apt-get install -y curl wget build-essential cmake g++ pkg-config gnupg2 lsb-release sudo
     - name: Install Arduino CLI
       run: curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | BINDIR=/usr/local/bin sh
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Gazebo
       run: |
         sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
@@ -84,7 +84,16 @@ jobs:
       run: sudo apt-get install -y libsdl2-dev
     - name: Build simulator
       run: make build_simulator
-    - uses: actions/upload-artifact@v4
+    - name: Run simulator
+      env:
+        GAZEBO_MODEL_PATH: ${{ github.workspace }}/gazebo/models
+        GAZEBO_PLUGIN_PATH: ${{ github.workspace }}/gazebo/build
+      run: |
+        OUT=$(timeout -k 10s 120s gzserver --verbose gazebo/flix.world 2>&1 | tee /dev/stderr)
+        if echo "$OUT" | grep -Pq "\[Err\](?! \[RenderEngine)"; then
+          exit 1
+        fi
+    - uses: actions/upload-artifact@v7
       with:
         name: gazebo-plugin-binary
         path: gazebo/build/*.so
@@ -96,7 +105,7 @@ jobs:
     steps:
     - name: Install Arduino CLI
       run: brew install arduino-cli
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Clean up python binaries # Workaround for https://github.com/actions/setup-python/issues/577
       run: |
         rm -f /usr/local/bin/2to3*

.github/workflows/docs.yml

@@ -16,7 +16,7 @@ jobs:
   markdownlint:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install markdownlint
       run: npm install -g markdownlint-cli2
     - name: Run markdownlint
@@ -25,13 +25,16 @@ jobs:
   build_book:
     runs-on: ubuntu-latest
     needs: markdownlint
+    env:
+      BINARIES: ${{ github.event_name == 'push' && (github.ref_name == 'master' || github.ref_name == 'dev') && github.repository == 'okalachev/flix' }}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install mdBook
       run: cargo install mdbook --vers 0.4.43 --locked
     - name: Build book
       run: cd docs && mdbook build
     - name: Wait for Build to complete
+      if: ${{ env.BINARIES }}
       uses: lewagon/wait-on-check-action@v1.9.1
       with:
         ref: ${{ github.sha }}
@@ -39,6 +42,7 @@ jobs:
         repo-token: ${{ secrets.GITHUB_TOKEN }}
         wait-interval: 30
     - name: Find firmware binaries
+      if: ${{ env.BINARIES }}
       id: build_run
       run: |
         RUN_ID=$(gh api "repos/${{ github.repository }}/actions/workflows/build.yml/runs?head_sha=${{ github.sha }}&per_page=1" --jq '.workflow_runs[0].id')
@@ -46,7 +50,8 @@ jobs:
       env:
         GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
     - name: Download firmware binaries
-      uses: actions/download-artifact@v4
+      if: ${{ env.BINARIES }}
+      uses: actions/download-artifact@v7
       with:
         github-token: ${{ secrets.GITHUB_TOKEN }}
         repository: ${{ github.repository }}
@@ -54,6 +59,7 @@ jobs:
         name: firmware-binary
         path: docs/build
     - name: Create shortcuts for firmware binaries
+      if: ${{ env.BINARIES }}
       working-directory: docs/build
       run: |
         for FQBN in esp32.esp32.*; do
@@ -64,12 +70,12 @@ jobs:
           ln -s "$FQBN/flix.ino.bootloader.bin" "flix.$BOARD.bootloader.bin"
         done
     - name: Upload artifact
-      uses: actions/upload-pages-artifact@v3
+      uses: actions/upload-pages-artifact@v5
       with:
         path: docs/build
 
   deploy:
-    if: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' }}
+    if: ${{ github.event_name == 'push' && github.ref_name == 'master' }}
     concurrency:
       group: "pages"
       cancel-in-progress: true
@@ -81,4 +87,4 @@ jobs:
     steps:
       - name: Deploy to GitHub Pages
         id: deployment
-        uses: actions/deploy-pages@v4
+        uses: actions/deploy-pages@v5

.github/workflows/tools.yml

@@ -10,7 +10,7 @@ jobs:
   csv_to_ulog:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Build csv_to_ulog
       run: cd tools/csv_to_ulog && mkdir build && cd build && cmake .. && make
     - name: Test csv_to_ulog
@@ -22,13 +22,13 @@ jobs:
   pyflix:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Python build tools
       run: pip install build
     - name: Build pyflix
       run: python3 -m build tools
     - name: Upload artifacts
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v7
       with:
         name: pyflix
         path: |
@@ -37,7 +37,7 @@ jobs:
   python_tools:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v7
     - name: Install Python dependencies
       run: pip install -r tools/requirements.txt
     - name: Test csv_to_mcap tool
@@ -46,3 +46,23 @@ jobs:
         echo -e "t,x,y,z\n0,1,2,3\n1,4,5,6" > log.csv
         ./csv_to_mcap.py log.csv
         test $(stat -c %s log.mcap) -eq 883
+  sloc:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v7
+    - run: sudo apt-get install -y cloc jq
+    - name: Print source lines of code
+      run: cloc --by-file-by-lang flix
+    - name: Checkout previous revision
+      uses: actions/checkout@v7
+      with:
+        ref: ${{ github.event_name == 'pull_request' && github.event.pull_request.base.sha || github.event.before }}
+        path: prev
+    - name: Annotate total source lines
+      run: |
+        SLOC_CURR=$(cloc flix --json | jq -r '.SUM.code')
+        SLOC_PREV=$(cloc prev/flix --json | jq -r '.SUM.code')
+        DIFF=$(printf '%+d' "$((SLOC_CURR - SLOC_PREV))")
+        echo "* Current SLOC: $SLOC_CURR" >> $GITHUB_STEP_SUMMARY
+        echo "* Previous SLOC: $SLOC_PREV" >> $GITHUB_STEP_SUMMARY
+        echo "* Diff: $DIFF" >> $GITHUB_STEP_SUMMARY

Makefile

@@ -1,13 +1,17 @@
 BOARD = esp32:esp32:esp32
 PORT := $(strip $(wildcard /dev/serial/by-id/usb-Silicon_Labs_CP21* /dev/serial/by-id/usb-1a86_USB_Single_Serial_* /dev/cu.usbserial-* /dev/cu.usbmodem*))
+VERSION = $(shell git describe --always --dirty)
 
 export ARDUINO_NETWORK_CONNECTION_TIMEOUT := 1h
 
 build: .core .libs
-	arduino-cli compile --fqbn $(BOARD) --build-property "build.core_debug_level=1" flix $(EXTRA)
+	arduino-cli compile flix \
+		--fqbn $(BOARD) \
+		--build-property "build.core_debug_level=1" \
+		--build-property "compiler.cpp.extra_flags=-DVERSION=$(VERSION) $(FLAGS)" $(EXTRA)
 
 upload: build
-	arduino-cli upload --fqbn $(BOARD) -p "$(PORT)" flix
+	arduino-cli upload flix --fqbn $(BOARD) -p "$(PORT)"
 
 erase:
 	arduino-cli burn-bootloader --fqbn $(BOARD) -p "$(PORT)" -P esptool
@@ -22,13 +26,13 @@ core .core:
 
 libs .libs:
 	arduino-cli lib update-index
-	arduino-cli lib install "FlixPeriph"
+	ARDUINO_LIBRARY_ENABLE_UNSAFE_INSTALL=1 arduino-cli lib install --git-url 'https://github.com/okalachev/flixperiph.git#dev'
 	arduino-cli lib install "MAVLink"@2.0.25
 	touch .libs
 
 upload_proxy: .core .libs
-	arduino-cli compile --fqbn $(BOARD) tools/espnow-proxy
-	arduino-cli upload --fqbn $(BOARD) -p "$(PORT)" tools/espnow-proxy
+	arduino-cli compile tools/espnow-proxy --fqbn $(BOARD)
+	arduino-cli upload tools/espnow-proxy --fqbn $(BOARD) -p "$(PORT)"
 
 gazebo/build cmake: gazebo/CMakeLists.txt
 	mkdir -p gazebo/build

docs/book/firmware.md

@@ -31,7 +31,7 @@
 
 * [`vector.h`](https://github.com/okalachev/flix/blob/master/flix/vector.h), [`quaternion.h`](https://github.com/okalachev/flix/blob/master/flix/quaternion.h) — библиотеки векторов и кватернионов.
 * [`pid.h`](https://github.com/okalachev/flix/blob/master/flix/pid.h) — ПИД-регулятор.
-* [`lpf.h`](https://github.com/okalachev/flix/blob/master/flix/lpf.h) — фильтр нижних частот.
+* [`filter.h`](https://github.com/okalachev/flix/blob/master/flix/filter.h) — фильтр нижних частот.
 
 ### Подсистема управления
 

docs/firmware.md

@@ -34,7 +34,7 @@ Utility files:
 
 * [`vector.h`](../flix/vector.h), [`quaternion.h`](../flix/quaternion.h) — vector and quaternion libraries.
 * [`pid.h`](../flix/pid.h) — generic PID controller.
-* [`lpf.h`](../flix/lpf.h) — generic low-pass filter.
+* [`filter.h`](../flix/filter.h) — generic low-pass filter.
 
 ### Control subsystem
 
@@ -73,7 +73,7 @@ Parameters subsystem (`parameters.ino`) uses standard [Preferences.h](https://do
 
 To add a new parameter:
 
-1. Define a global variable for the parameter, two types are supported: `float` and `int`.
+1. Define a global variable for the parameter, three types are supported: `float`, `int`, and `bool`.
 2. Add an entry to the `parameters` array, with the parameter name, a pointer to the variable, and optionally a callback function to call when the parameter is changed.
 3. Everything else will be handled automatically.
 

flix/cli.ino

@@ -50,8 +50,14 @@ const char* motd =
 "sta <ssid> <password> - configure Wi-Fi client mode\n"
 "espnow <mac> [<key>] - configure ESP-NOW peer\n"
 "mot - show motor output\n"
-"log [dump] - print log header [and data]\n"
 "mfr/mfl/mrr/mrl [<thrust>] - test motor (remove props)\n"
+"log [dump] - print log header [and data]\n"
+"log - show log info\n"
+"log header - show log header\n"
+"log reset - reset log\n"
+"log <name> <rate> - setup log topic rate\n"
+"l <str> - show log values starting with str\n"
+"l expose <name> - expose log value to telemetry\n"
 "sys - show system info\n"
 "reset - reset drone's state\n"
 "reboot - reboot the drone\n";
@@ -99,7 +105,7 @@ void doCommand(String str, bool echo = false) {
 		if (success) {
 			print("%s = %g\n", arg0.c_str(), getParameter(arg0.c_str()));
 		} else {
-			print("Parameter not found: %s\n", arg0.c_str());
+			print("Cannot set parameter: %s\n", arg0.c_str());
 		}
 	} else if (command == "preset") {
 		resetParameters();
@@ -153,9 +159,18 @@ void doCommand(String str, bool echo = false) {
 	} else if (command == "mot") {
 		print("front-right %g front-left %g rear-right %g rear-left %g\n",
 			motors[MOTOR_FRONT_RIGHT], motors[MOTOR_FRONT_LEFT], motors[MOTOR_REAR_RIGHT], motors[MOTOR_REAR_LEFT]);
-	} else if (command == "log") {
+	} else if (command == "log" && arg0 == "") {
+		printLogInfo();
+	} else if (command == "log" && arg1 != "") {
+		configLogThrottle(arg0.c_str(), arg1.toFloat());
+	} else if (command == "log" && arg0 == "header") {
 		printLogHeader();
-		if (arg0 == "dump") printLogData();
+	} else if (command == "log" && arg0 == "reset") {
+		resetLog();
+	} else if (command == "l" && arg0 == "expose" && arg1 != "") {
+		exposeLogValue(arg1.c_str());
+	} else if (command == "l") {
+		printLogValues(arg0.c_str());
 	} else if (command == "cr") {
 		calibrateRC();
 	} else if (command == "ca") {
@@ -174,7 +189,12 @@ void doCommand(String str, bool echo = false) {
 		print("Temperature: %.1f °C\n", temperatureRead());
 		print("Total RAM: %d KB\n", ESP.getHeapSize() / 1024);
 		print("Free heap: %d KB\n", ESP.getFreeHeap() / 1024);
-		print("Firmware: " __DATE__ " " __TIME__ "\n");
+		print("PSRAM: %d KB\n", ESP.getPsramSize() / 1024);
+		print("Free PSRAM: %d KB\n", ESP.getFreePsram() / 1024);
+#ifdef VERSION
+		print("Version: %s\n", STRINGIFY(VERSION));
+#endif
+		print("Build date: " __DATE__ " " __TIME__ "\n");
 		// Print tasks table
 		print("Num  Task                MinSt  Prio  Core  CPU%%\n");
 		int taskCount = uxTaskGetNumberOfTasks();

flix/config.h

@@ -12,16 +12,22 @@ void setDefaults() {
 		pwmFrequency = 38000;
 	#endif
 
+	#ifdef CONFIG_IDF_TARGET_ESP32
+		// classic esp32 configuration
+		motorPins[0] = 12;
+		motorPins[1] = 13;
+		motorPins[2] = 14;
+		motorPins[3] = 15;
+	#endif
+
 	#ifdef FLIX2
 		imuModel = 4; // ICM-40609-D
 		imuIntPin = 10;
 		imuCsPin = 14;
-
-		motorPins[MOTOR_REAR_LEFT] = 41;
-		motorPins[MOTOR_REAR_RIGHT] = 7;
-		motorPins[MOTOR_FRONT_RIGHT] = 18;
-		motorPins[MOTOR_FRONT_LEFT] = 38;
-
 		voltagePin = 3;
+		motorPins[0] = 41;
+		motorPins[1] = 7;
+		motorPins[2] = 18;
+		motorPins[3] = 38;
 	#endif
 }

flix/control.ino

@@ -16,7 +16,7 @@ bool armed = false;
 Quaternion attitudeTarget;
 Vector ratesTarget;
 Vector ratesExtra; // feedforward rates
-Vector torqueTarget;
+Vector torqueTarget; // 0 - no torque, 1 - maximum torque
 float thrustTarget;
 
 PID rollRatePID(0.05, 0.2, 0.001, 0.3, 0.2);

flix/estimate.ino

@@ -15,6 +15,12 @@ bool landed;
 float accWeight = 0.003;
 float levelWeight = 0.0002;
 LowPassFilter<Vector> ratesFilter(0.2); // cutoff frequency ~ 40 Hz
+NotchFilter<Vector> ratesNotch(382, 40);
+
+void setupEstimate() {
+	print("Setup estimation\n");
+	ratesNotch.reset();
+}
 
 void estimate() {
 	applyGyro();
@@ -25,6 +31,7 @@ void estimate() {
 void applyGyro() {
 	// filter gyro to get angular rates
 	rates = ratesFilter.update(gyro);
+	rates = ratesNotch.update(rates);
 
 	// apply rates to attitude
 	attitude = Quaternion::rotate(attitude, Quaternion::fromRotationVector(rates * dt));

flix/filter.h

@@ -1,7 +1,7 @@
 // Copyright (c) 2023 Oleg Kalachev <okalachev@gmail.com>
 // Repository: https://github.com/okalachev/flix
 
-// Low pass filter implementation
+// Low pass and notch filters
 
 #pragma once
 
@@ -32,3 +32,67 @@ public:
 private:
 	bool init = false;
 };
+
+template <typename T>
+class NotchFilter {
+public:
+	float frequency;
+	float bandwidth;
+	T output;
+
+	NotchFilter(float frequency, float bandwidth): frequency(frequency), bandwidth(bandwidth) {
+		reset();
+	};
+
+	T update(const T input) {
+		if (frequency <= 0 || bandwidth <= 0) return input;
+
+		if (!init) {
+			init = true;
+			x1 = x2 = input;
+			y1 = y2 = input;
+			return output = input;
+		}
+
+		output = b0 * input + b1 * x1 + b2 * x2 - a1 * y1 - a2 * y2;
+
+		x2 = x1;
+		x1 = input;
+		y2 = y1;
+		y1 = output;
+
+		return output;
+	}
+
+	void reset() {
+		const float dt = 0.001f;
+		float f = frequency;
+		float bw = bandwidth;
+		if (f < 0) f = 0;
+		if (bw < 1e-6f) bw = 1e-6f;
+
+		float q = f / bw;
+		if (q < 1e-3f) q = 1e-3f;
+
+		const float w0 = 2.0f * PI * f * dt;
+		const float c = cos(w0);
+		const float s = sin(w0);
+		const float alpha = s / (2.0f * q);
+
+		const float a0 = 1.0f + alpha;
+		const float invA0 = 1.0f / a0;
+
+		b0 = 1.0f * invA0;
+		b1 = -2.0f * c * invA0;
+		b2 = 1.0f * invA0;
+		a1 = -2.0f * c * invA0;
+		a2 = (1.0f - alpha) * invA0;
+
+		init = false;
+	}
+
+private:
+	float b0, b1, b2, a1, a2;
+	T x1, x2, y1, y2;
+	bool init = false;
+};

flix/flix.ino

@@ -26,6 +26,8 @@ void setup() {
 	setupWiFi();
 	setupIMU();
 	setupRC();
+	setupEstimate();
+	setupLog();
 	setLED(false);
 	print("Initializing complete\n");
 }
@@ -40,6 +42,6 @@ void loop() {
 	handleInput();
 	processMavlink();
 	readVoltage();
-	logData();
+	loopLog();
 	syncParameters();
 }

flix/log.ino

@@ -1,77 +1,272 @@
 // Copyright (c) 2023 Oleg Kalachev <okalachev@gmail.com>
 // Repository: https://github.com/okalachev/flix
 
-// In-RAM logging
+// Logging subsystem
 
 #include "vector.h"
 #include "util.h"
 
-#define LOG_RATE 100
-#define LOG_DURATION 10
-#define LOG_SIZE LOG_DURATION * LOG_RATE
+int logMemory = 0; // 0 - RAM, 1 - PSRAM, -1 - disabled
+float logUsage = 0.5; // fraction of free memory to use for log
 
-Vector attitudeEuler;
-Vector attitudeTargetEuler;
-
-struct LogEntry {
+struct LogValue {
 	const char *name;
-	float *value;
+	Value value;
+	float lastValue = NAN;
+	bool logged = true; // if false, use only for triggering log update
+	LogValue() : name(nullptr), value() {}; // empty value constructor
+	template <typename T>
+	LogValue(const char *name, T value, bool logged = true) : name(name), value(value), logged(logged) {};
 };
 
-LogEntry logEntries[] = {
-	{"t", &t},
+struct LogTopic {
+	LogValue values[10];
+	int length = 0; // number of logged values
+	float throttle; // max update rate, Hz
+	float lastUpdate = -INFINITY;
+
+	LogTopic(float throttle, LogValue v0, LogValue v1 = {}, LogValue v2 = {}, LogValue v3 = {}, LogValue v4 = {}, LogValue v5 = {}, LogValue v6 = {}, LogValue v7 = {}, LogValue v8 = {}, LogValue v9 = {}) :
+		throttle(throttle), values{v0, v1, v2, v3, v4, v5, v6, v7, v8, v9} {
+			// Count logged values
+			for (auto& v : values) {
+				if (v.name == nullptr) break;
+				if (v.logged) length++;
+			}
+		};
+
+	LogTopic(LogValue v0, LogValue v1 = {}, LogValue v2 = {}, LogValue v3 = {}, LogValue v4 = {}, LogValue v5 = {}, LogValue v6 = {}, LogValue v7 = {}, LogValue v8 = {}, LogValue v9 = {}) :
+		LogTopic(INFINITY, v0, v1, v2, v3, v4, v5, v6, v7, v8, v9) {};
+};
+
+LogTopic logTopics[] = {
+	// time
+	LogTopic({"t", &t}), // must be the first topic
+	LogTopic(1, {"loopRate", &loopRate}),
+
+	// imu
+	LogTopic(
+		{"gyro.x", &gyro.x},
+		{"gyro.y", &gyro.y},
+		{"gyro.z", &gyro.z}),
+
+	LogTopic(50,
+		{"acc.x", &acc.x},
+		{"acc.y", &acc.y},
+		{"acc.z", &acc.z}),
+
+	LogTopic(10,
+		{"gyroBias.x", &gyroBias.x},
+		{"gyroBias.y", &gyroBias.y},
+		{"gyroBias.z", &gyroBias.z}),
+
+	// estimation
+	LogTopic(50,
 		{"rates.x", &rates.x},
 		{"rates.y", &rates.y},
 		{"rates.z", &rates.z},
+		{"attitude.roll", []() { return attitude.getRoll(); }},
+		{"attitude.pitch", []() { return attitude.getPitch(); }},
+		{"attitude.yaw", []() { return attitude.getYaw(); }}),
+
+	// rc
+	LogTopic(10,
+		{"controlTime", &controlTime, false}, // trigger value
+		{"controlRoll", &controlRoll},
+		{"controlPitch", &controlPitch},
+		{"controlYaw", &controlYaw},
+		{"controlThrottle", &controlThrottle}),
+
+	// control
+	LogTopic({"armed", &armed}),
+	LogTopic({"mode", &mode}),
+
+	LogTopic(10,
 		{"ratesTarget.x", &ratesTarget.x},
 		{"ratesTarget.y", &ratesTarget.y},
 		{"ratesTarget.z", &ratesTarget.z},
-	{"attitude.x", &attitudeEuler.x},
-	{"attitude.y", &attitudeEuler.y},
-	{"attitude.z", &attitudeEuler.z},
-	{"attitudeTarget.x", &attitudeTargetEuler.x},
-	{"attitudeTarget.y", &attitudeTargetEuler.y},
-	{"attitudeTarget.z", &attitudeTargetEuler.z},
-	{"thrustTarget", &thrustTarget}
+		{"attitudeTarget.roll", []() { return attitudeTarget.getRoll(); }},
+		{"attitudeTarget.pitch", []() { return attitudeTarget.getPitch(); }},
+		{"attitudeTarget.yaw", []() { return attitudeTarget.getYaw(); }},
+		{"thrustTarget", &thrustTarget}),
+
+	// motors
+	LogTopic(
+		{"motors[0]", &motors[0]},
+		{"motors[1]", &motors[1]},
+		{"motors[2]", &motors[2]},
+		{"motors[3]", &motors[3]}),
+
+	// misc
+	LogTopic(5,
+		{"voltage", &voltage},
+		{"temp", &temperatureRead},
+		{"imuTemp", []() { return imu->getTemp(); }}),
 };
 
-const int logColumns = sizeof(logEntries) / sizeof(logEntries[0]);
-float logBuffer[LOG_SIZE][logColumns];
+void *logBuffer; // buffer for log data
+size_t logCapacity;
+size_t logCursor = 0;
+size_t logLength = 0;
+LogValue *logExposed = nullptr; // log values exposed to telemetry
 
-void prepareLogData() {
-	attitudeEuler = attitude.toEuler();
-	attitudeTargetEuler = attitudeTarget.toEuler();
+void setupLog() {
+	print("Setup log\n");
+
+	free(logBuffer); // when reconfiguring
+	logBuffer = nullptr;
+	logCursor = 0;
+	logLength = 0;
+
+	if (logMemory == 0) {
+		logCapacity = ESP.getFreeHeap() * logUsage;
+		logBuffer = (uint8_t *)calloc(logCapacity, 1);
+	} else if (logMemory == 1) {
+		logCapacity = ESP.getFreePsram() * logUsage;
+		logBuffer = (uint8_t *)heap_caps_calloc(logCapacity, 1, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
+	}
 }
 
-void logData() {
-	if (!armed) return;
-	static int logPointer = 0;
-	static Rate period(LOG_RATE);
-	if (!period) return;
+void loopLog() {
+	if (logBuffer == nullptr || !armed) return;
 
-	prepareLogData();
+	if (!logLength) resetLog(); // reset state on first log write
 
-	for (int i = 0; i < logColumns; i++) {
-		logBuffer[logPointer][i] = *logEntries[i].value;
+	static Rate sync(2);
+	if (sync) {
+		const uint8_t marker[] = {0x1A, 0x91, 0x4F, 0xF6, 0x7F};
+		writeLog(&marker, sizeof(marker)); // write sync marker
 	}
 
-	logPointer++;
-	if (logPointer >= LOG_SIZE) {
-		logPointer = 0;
+	for (uint8_t i = 0; i < sizeof(logTopics) / sizeof(logTopics[0]); i++) {
+		LogTopic& topic = logTopics[i];
+		if (t - topic.lastUpdate < 1 / topic.throttle) continue; // throttle topic
+		if (!isTopicUpdated(i)) continue; // skip if topic was't updated
+
+		topic.lastUpdate = t;
+		writeLog(&i, sizeof(i)); // write topic index
+
+		for (auto& value : topic.values) {
+			if (value.name == nullptr) break;
+			if (!value.logged) continue;
+			value.lastValue = value.value.get();
+			writeLog(&value.lastValue, sizeof(float)); // write value
 		}
 	}
+}
+
+void resetLog() {
+	for (auto& topic : logTopics) {
+		topic.lastUpdate = -INFINITY;
+		for (auto& value : topic.values) {
+			value.lastValue = NAN;
+		}
+	}
+	logCursor = 0;
+	logLength = 0;
+}
+
+void writeLog(const void *data, size_t size) {
+	size_t first = min(size, logCapacity - logCursor);
+	size_t second = size - first;
+	memcpy(logBuffer + logCursor, data, first);
+	logCursor = (logCursor + first) % logCapacity;
+	if (second > 0) {
+		memcpy(logBuffer + logCursor, data + first, second);
+		logCursor = (logCursor + second) % logCapacity;
+	}
+	logLength = min(logLength + size, logCapacity);
+}
+
+void readLog(void *data, size_t position, size_t size) {
+	if (logLength == logCapacity) {
+		position = (logCursor + position) % logCapacity;
+	}
+	size_t first = min(size, logCapacity - position);
+	size_t second = size - first;
+	memcpy(data, logBuffer + position, first);
+	if (second > 0) {
+		memcpy(data + first, logBuffer, second);
+	}
+}
+
+bool isTopicUpdated(const uint8_t topic) {
+	LogTopic& logTopic = logTopics[topic];
+	bool updated = false;
+
+	for (auto& value : logTopic.values) {
+		if (value.name == nullptr) break;
+		float v = value.value.get();
+		if (!floatEquals(value.lastValue, v)) {
+			value.lastValue = v;
+			updated = true;
+		}
+	}
+	return updated;
+}
+
+void printLogInfo() {
+	if (logMemory == -1) return print("Log: disabled\n");
+
+	print("Memory: %s\n", logMemory == 0 ? "RAM" : "PSRAM");
+	print("Usage: %.f%%\n", logUsage * 100);
+	print("Capacity: %u bytes\n", (unsigned)logCapacity);
+	print("Used: %u bytes\n", (unsigned)logLength);
+	print("Estimated duration: %d seconds\n", estimateLogDuration());
+}
+
+int estimateLogDuration() {
+	float bandwidth = 0;
+	for (LogTopic& topic : logTopics) {
+		float rate = isinf(topic.throttle) ? loopRate : topic.throttle;
+		bandwidth += rate * topic.length * sizeof(float);
+	}
+	return logCapacity / bandwidth;
+}
 
 void printLogHeader() {
-	for (int i = 0; i < logColumns; i++) {
-		print("%s%s", logEntries[i].name, i < logColumns - 1 ? "," : "\n");
+	int i = 0;
+	for (auto& topic : logTopics) {
+		print("Topic #%d (%g Hz):\n", i++, topic.throttle);
+		for (auto& value : topic.values) {
+			if (value.name == nullptr) break;
+			print("  %s%s\n", value.name, value.logged ?"" : " (not logged)");
+		}
 	}
 }
 
-void printLogData() {
-	for (int i = 0; i < LOG_SIZE; i++) {
-		if (logBuffer[i][0] == 0) continue; // skip empty records
-		for (int j = 0; j < logColumns; j++) {
-			print("%g%s", logBuffer[i][j], j < logColumns - 1 ? "," : "\n");
+void printLogValues(const char *filter) {
+	for (LogTopic& topic : logTopics) {
+		for (LogValue& value : topic.values) {
+			if (value.name == nullptr) break;
+			if (strncasecmp(value.name, filter, strlen(filter))) continue;
+			print("%s = %g\n", value.name, value.value.get());
 		}
 	}
 }
+
+void configLogThrottle(const char *name, float throttle) {
+	for (LogTopic& topic : logTopics) {
+		for (LogValue& value : topic.values) {
+			if (value.name == nullptr) break;
+			if (strcasecmp(value.name, name) != 0) continue;
+			topic.throttle = throttle;
+			print("Log throttle for %s set to %.1f Hz\n", name, throttle);
+			return;
+		}
+	}
+	print("Log value not found: %s\n", name);
+}
+
+void exposeLogValue(const char *name) {
+	for (int i = 0; i < sizeof(logTopics) / sizeof(logTopics[0]); i++) {
+		LogTopic& topic = logTopics[i];
+		for (LogValue& value : topic.values) {
+			if (value.name == nullptr) break;
+			if (strcasecmp(value.name, name) != 0) continue;
+			logExposed = &value;
+			print("Log value %s exposed\n", name);
+			return;
+		}
+	}
+	print("Log value not found: %s\n", name);
+}

flix/mavlink.ino

@@ -16,6 +16,7 @@ Rate telemetryAttitude(20);
 Rate telemetryRC(10);
 Rate telemetryMotors(10);
 Rate telemetryIMU(15);
+Rate telemetryTopic(10);
 
 float mavlinkTime = NAN; // time of last received message
 String mavlinkPrintBuffer;
@@ -84,6 +85,12 @@ void sendMavlink() {
 			0, 0, 0, 0);
 		sendMessage(&msg);
 	}
+
+	if (telemetryTopic && logExposed != nullptr) {
+		mavlink_msg_named_value_float_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg,
+			time, logExposed->name, logExposed->value.get());
+		sendMessage(&msg);
+	}
 }
 
 void sendMessage(const void *msg) {
@@ -92,6 +99,26 @@ void sendMessage(const void *msg) {
 	sendWiFi(buf, len);
 }
 
+static uint8_t mavlinkBatch[ESP_NOW_MAX_DATA_LEN_V2];
+static int mavlinkBatchSize = 0;
+
+void batchMessage(const void *msg) {
+	uint8_t buf[MAVLINK_MAX_PACKET_LEN];
+	int len = mavlink_msg_to_send_buffer(buf, (mavlink_message_t *)msg);
+
+	if (mavlinkBatchSize + len > sizeof(mavlinkBatch)) {
+		sendWiFi(mavlinkBatch, mavlinkBatchSize);
+		mavlinkBatchSize = 0;
+	}
+	memcpy(mavlinkBatch + mavlinkBatchSize, buf, len);
+	mavlinkBatchSize += len;
+}
+
+void flushBatchMessages() {
+	sendWiFi(mavlinkBatch, mavlinkBatchSize);
+	mavlinkBatchSize = 0;
+}
+
 void receiveMavlink() {
 	uint8_t buf[MAVLINK_MAX_PACKET_LEN];
 	int len = receiveWiFi(buf, MAVLINK_MAX_PACKET_LEN);
@@ -196,18 +223,24 @@ void handleMavlink(const void *_msg) {
 		mavlink_msg_set_attitude_target_decode(&msg, &m);
 		if (m.target_system && m.target_system != mavlinkSysId) return;
 
-		// copy attitude, rates and thrust targets
-		ratesTarget.x = m.body_roll_rate;
-		ratesTarget.y = -m.body_pitch_rate; // convert to flu
-		ratesTarget.z = -m.body_yaw_rate;
+		if (!(m.type_mask & ATTITUDE_TARGET_TYPEMASK_ATTITUDE_IGNORE)) {
+			// Attitude control
 			attitudeTarget.w = m.q[0];
 			attitudeTarget.x = m.q[1];
-		attitudeTarget.y = -m.q[2];
+			attitudeTarget.y = -m.q[2]; // convert to flu
 			attitudeTarget.z = -m.q[3];
-		thrustTarget = m.thrust;
-		ratesExtra = Vector(0, 0, 0);
+			ratesExtra.x = m.body_roll_rate;
+			ratesExtra.y = -m.body_pitch_rate;
+			ratesExtra.z = -m.body_yaw_rate;
+		} else {
+			// Rates control
+			attitudeTarget.invalidate();
+			ratesTarget.x = m.body_roll_rate;
+			ratesTarget.y = -m.body_pitch_rate;
+			ratesTarget.z = -m.body_yaw_rate;
+		}
 
-		if (m.type_mask & ATTITUDE_TARGET_TYPEMASK_ATTITUDE_IGNORE) attitudeTarget.invalidate();
+		thrustTarget = valid(m.thrust) ? m.thrust : thrustTarget;
 		armed = m.thrust > 0;
 	}
 
@@ -225,18 +258,29 @@ void handleMavlink(const void *_msg) {
 		armed = motors[0] > 0 || motors[1] > 0 || motors[2] > 0 || motors[3] > 0;
 	}
 
+	if (msg.msgid == MAVLINK_MSG_ID_LOG_REQUEST_LIST) {
+		const uint32_t qgcEpoch = 1262304000; // qgc accepts only timestamps after 2010-01-01
+		mavlink_message_t response;
+		mavlink_msg_log_entry_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &response,
+			0, 1, 0, qgcEpoch + t * 60, logLength); // put fake unique date to make qgc happy with saving logs
+		sendMessage(&response);
+	}
+
 	if (msg.msgid == MAVLINK_MSG_ID_LOG_REQUEST_DATA) {
 		mavlink_log_request_data_t m;
 		mavlink_msg_log_request_data_decode(&msg, &m);
 		if (m.target_system && m.target_system != mavlinkSysId) return;
 
-		// Send all log records
-		for (int i = 0; i < sizeof(logBuffer) / sizeof(logBuffer[0]); i++) {
-			mavlink_message_t msg;
-			mavlink_msg_log_data_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &msg, 0, i,
-				sizeof(logBuffer[0]), (uint8_t *)logBuffer[i]);
-			sendMessage(&msg);
+		for (int i = 0; i < m.count; i += MAVLINK_MSG_LOG_DATA_FIELD_DATA_LEN) {
+			int chunkSize = min(MAVLINK_MSG_LOG_DATA_FIELD_DATA_LEN, (int)(m.count - i));
+			mavlink_message_t response;
+			uint8_t data[MAVLINK_MSG_LOG_DATA_FIELD_DATA_LEN];
+			readLog(data, m.ofs + i, chunkSize);
+			mavlink_msg_log_data_pack(mavlinkSysId, MAV_COMP_ID_AUTOPILOT1, &response,
+				m.id, m.ofs + i, chunkSize, data);
+			batchMessage(&response);
 		}
+		flushBatchMessages();
 	}
 
 	// Handle commands

flix/motors.ino

@@ -7,7 +7,7 @@
 
 float motors[4]; // normalized motor thrusts in range [0..1]
 
-int motorPins[4] = {12, 13, 14, 15}; // default pin numbers
+int motorPins[4] = {-1, -1, -1, -1}; // default pin numbers
 int pwmFrequency = 78000;
 int pwmResolution = 10;
 int pwmStop = 0;

flix/parameters.ino

@@ -20,15 +20,11 @@ Preferences storage;
 
 struct Parameter {
 	const char *name; // max length is 15
-	bool integer;
-	union { float *f; int *i; }; // pointer to the variable
-	float inital; // default value
+	Value value; // pointer to the variable
+	float initial; // default value
 	float cache; // what's stored in flash
 	void (*callback)(); // called after parameter change
-	Parameter(const char *name, float *variable, void (*callback)() = nullptr) : name(name), integer(false), f(variable), callback(callback) {};
-	Parameter(const char *name, int *variable, void (*callback)() = nullptr) : name(name), integer(true), i(variable), callback(callback) {};
-	float getValue() const { return integer ? *i : *f; };
-	void setValue(const float value) { if (integer) *i = value; else *f = value; };
+	Parameter(const char *name, Value value, void (*callback)() = nullptr) : name(name), value(value), callback(callback) {};
 };
 
 Parameter parameters[] = {
@@ -86,6 +82,8 @@ Parameter parameters[] = {
 	{"EST_ACC_WEIGHT", &accWeight},
 	{"EST_LVL_WEIGHT", &levelWeight},
 	{"EST_RATES_LPF_A", &ratesFilter.alpha},
+	{"EST_RATES_NF_F", &ratesNotch.frequency, setupEstimate},
+	{"EST_RATES_NF_BW", &ratesNotch.bandwidth, setupEstimate},
 	// motors
 	{"MOT_PIN_FL", &motorPins[MOTOR_FRONT_LEFT], setupMotors},
 	{"MOT_PIN_FR", &motorPins[MOTOR_FRONT_RIGHT], setupMotors},
@@ -134,6 +132,22 @@ Parameter parameters[] = {
 	{"MAV_RATE_RC", &telemetryRC.rate},
 	{"MAV_RATE_MOT", &telemetryMotors.rate},
 	{"MAV_RATE_IMU", &telemetryIMU.rate},
+	{"MAV_RATE_TOPIC", &telemetryTopic.rate},
+	// log
+	{"LOG_MEMORY", &logMemory, setupLog},
+	{"LOG_USAGE", &logUsage, setupLog},
+	{"LOG_RATE_000", &logTopics[0].throttle},
+	{"LOG_RATE_001", &logTopics[1].throttle},
+	{"LOG_RATE_002", &logTopics[2].throttle},
+	{"LOG_RATE_003", &logTopics[3].throttle},
+	{"LOG_RATE_004", &logTopics[4].throttle},
+	{"LOG_RATE_005", &logTopics[5].throttle},
+	{"LOG_RATE_006", &logTopics[6].throttle},
+	{"LOG_RATE_007", &logTopics[7].throttle},
+	{"LOG_RATE_008", &logTopics[8].throttle},
+	{"LOG_RATE_009", &logTopics[9].throttle},
+	{"LOG_RATE_010", &logTopics[10].throttle},
+	{"LOG_RATE_011", &logTopics[11].throttle},
 	// power
 	{"PWR_VOLT_PIN", &voltagePin, setupPower},
 	{"PWR_VOLT_SCALE", &voltageScale},
@@ -150,11 +164,11 @@ void setupParameters() {
 	storage.begin("flix");
 	// Read parameters from storage
 	for (auto &parameter : parameters) {
-		parameter.inital = parameter.getValue();
+		parameter.initial = parameter.value.get();
 		if (storage.isKey(parameter.name)) {
-			parameter.setValue(storage.getFloat(parameter.name));
+			parameter.value.set(storage.getFloat(parameter.name));
 		}
-		parameter.cache = parameter.getValue();
+		parameter.cache = parameter.value.get();
 	}
 }
 
@@ -169,13 +183,13 @@ const char *getParameterName(int index) {
 
 float getParameter(int index) {
 	if (index < 0 || index >= parametersCount()) return NAN;
-	return parameters[index].getValue();
+	return parameters[index].value.get();
 }
 
 float getParameter(const char *name) {
 	for (auto &parameter : parameters) {
 		if (strcasecmp(parameter.name, name) == 0) {
-			return parameter.getValue();
+			return parameter.value.get();
 		}
 	}
 	return NAN;
@@ -184,10 +198,9 @@ float getParameter(const char *name) {
 bool setParameter(const char *name, const float value) {
 	for (auto &parameter : parameters) {
 		if (strcasecmp(parameter.name, name) == 0) {
-			if (parameter.integer && !isfinite(value)) return false; // can't set integer to NaN or Inf
-			parameter.setValue(value);
+			bool success = parameter.value.set(value);
 			if (parameter.callback) parameter.callback();
-			return true;
+			return success;
 		}
 	}
 	return false;
@@ -199,10 +212,10 @@ void syncParameters() {
 	if (motorsActive()) return; // don't use flash while flying, it may cause a delay
 
 	for (auto &parameter : parameters) {
-		if (floatEquals(parameter.getValue(), parameter.cache)) continue; // no change
+		if (floatEquals(parameter.value.get(), parameter.cache)) continue; // no change
 
-		storage.putFloat(parameter.name, parameter.getValue());
-		parameter.cache = parameter.getValue(); // update cache
+		storage.putFloat(parameter.name, parameter.value.get());
+		parameter.cache = parameter.value.get(); // update cache
 	}
 }
 
@@ -211,10 +224,10 @@ void printParameters(const char *filter) {
 	for (auto &parameter : parameters) {
 		if (strncasecmp(parameter.name, filter, strlen(filter))) continue;
 
-		if (floatEquals(parameter.getValue(), parameter.inital)) { // parameter changed
-			print("%-15s  %-13g\n", parameter.name, parameter.getValue());
+		if (floatEquals(parameter.value.get(), parameter.initial)) { // parameter changed
+			print("%-15s  %-13g\n", parameter.name, parameter.value.get());
 		} else {
-			print("%-15s  %-13g  [%g]\n", parameter.name, parameter.getValue(), parameter.inital);
+			print("%-15s  %-13g  [%g]\n", parameter.name, parameter.value.get(), parameter.initial);
 		}
 	}
 }

flix/pid.h

@@ -18,7 +18,7 @@ public:
 
 	LowPassFilter<float> lpf; // low pass filter for derivative term
 
-	PID(float p, float i = 0, float d = 0, float windup = 0, float dAlpha = 1, float dtMax = 0.1) :
+	PID(float p, float i = 0, float d = 0, float windup = INFINITY, float dAlpha = 1, float dtMax = 0.1) :
 		p(p), i(i), d(d), windup(windup), lpf(dAlpha), dtMax(dtMax) {}
 
 	float update(float error) {

flix/util.h

@@ -11,6 +11,8 @@
 const float ONE_G = 9.80665;
 extern float t;
 
+#define STRINGIFY(x) __STRINGIFY(x)
+
 float mapf(float x, float in_min, float in_max, float out_min, float out_max) {
 	return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
 }
@@ -64,6 +66,50 @@ public:
 	}
 };
 
+// Simple variant type for logging and parameters
+struct Value {
+	enum { EMPTY, FLOAT, INT, BOOL, FLOAT_FN, INT_FN, BOOL_FN } type;
+	union {
+		void *pointer;
+		float *_float;
+		int *_int;
+		bool *_bool;
+		float (*floatFn)();
+		int (*intFn)();
+		bool (*boolFn)();
+	};
+
+	Value() : type(EMPTY), pointer(nullptr) {};
+	Value(float *pt) : type(FLOAT), _float(pt) {};
+	Value(int *pt) : type(INT), _int(pt) {};
+	Value(bool *pt) : type(BOOL), _bool(pt) {};
+	Value(float (*fn)()) : type(FLOAT_FN), floatFn(fn) {};
+	Value(int (*fn)()) : type(INT_FN), intFn(fn) {};
+	Value(bool (*fn)()) : type(BOOL_FN), boolFn(fn) {};
+
+	float get() const {
+		switch (type) {
+			case FLOAT: return *_float;
+			case INT: return *_int;
+			case BOOL: return *_bool ? 1 : 0;
+			case FLOAT_FN: return floatFn();
+			case INT_FN: return intFn();
+			case BOOL_FN: return boolFn() ? 1 : 0;
+			default: return NAN;
+		}
+	};
+
+	bool set(float value) const {
+		switch (type) {
+			case FLOAT: *_float = value; break;
+			case INT: if (!isfinite(value)) return false; *_int = value; break;
+			case BOOL: *_bool = (value != 0); break;
+			default: return false;
+		}
+		return true;
+	}
+};
+
 // Rate limiter
 class Rate {
 public:

gazebo/Arduino.h

@@ -20,6 +20,10 @@
 #define radians(deg) ((deg)*DEG_TO_RAD)
 #define degrees(rad) ((rad)*RAD_TO_DEG)
 
+#define MALLOC_CAP_SPIRAM (1<<10)
+#define MALLOC_CAP_8BIT (1<<2)
+#define ESP_NOW_MAX_DATA_LEN_V2 1470
+
 #define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
 template<typename T> T max(T a, T b) { return a > b ? a : b; }
 template<typename T> T min(T a, T b) { return a < b ? a : b; }
@@ -156,6 +160,8 @@ HardwareSerial Serial, Serial1, Serial2;
 class EspClass {
 public:
 	void restart() { Serial.println("Ignore reboot in simulation"); }
+	uint32_t getFreeHeap() { return 300 * 1024; } // assume 300 KB free heap
+	uint32_t getFreePsram() { return 8 * 1024 * 1024; } // assume 8 MB free PSRAM
 } ESP;
 
 unsigned long __delayTime = 0;
@@ -165,11 +171,16 @@ void delay(uint32_t ms) {
 	__delayTime += ms * 1000;
 }
 
+void *heap_caps_calloc(size_t n, size_t size, uint32_t caps) {
+	return calloc(n, size);
+}
+
 bool ledcAttach(uint8_t pin, uint32_t freq, uint8_t resolution) { return true; }
 bool ledcWrite(uint8_t pin, uint32_t duty) { return true; }
 uint32_t ledcChangeFrequency(uint8_t pin, uint32_t freq, uint8_t resolution) { return freq; }
 int8_t digitalPinToAnalogChannel(uint8_t pin) { return -1; }
 uint32_t analogReadMilliVolts(uint8_t pin) { return 0; }
+float temperatureRead() { return 0; }
 
 unsigned long __micros;
 unsigned long __resetTime = 0;

gazebo/flix.h

@@ -51,8 +51,17 @@ void normalizeRC();
 void calibrateRC();
 void calibrateRCChannel(int*, uint16_t[16], uint16_t[16], const char*);
 void printRCCalibration();
+void loopLog();
+void resetLog();
+void writeLog(const void *data, size_t size);
+void readLog(void *data, size_t position, size_t size);
+bool isTopicUpdated(const uint8_t topic);
+void printLogInfo();
+int estimateLogDuration();
 void printLogHeader();
-void printLogData();
+void printLogValues(const char *filter);
+void configLogThrottle(const char *name, float throttle);
+void exposeLogValue(const char *name);
 void processMavlink();
 void sendMavlink();
 void sendMessage(const void *msg);
@@ -83,3 +92,8 @@ void printIMUInfo() {};
 void printWiFiInfo() {};
 void configWiFi(bool, const char*, const char*) { print("Skip WiFi config\n"); };
 void setWiFiMode(const String& mode) { print("Skip WiFi mode set\n"); };
+
+class IMU {
+public:
+	float getTemp() { return 0; }
+} *imu;

gazebo/simulator.cpp

@@ -55,6 +55,7 @@ public:
 		initNode();
 		Serial.begin(0);
 		setupParameters();
+		setupLog();
 		rcRxPin = 1; // set rc pin to enable rc reading
 		gzmsg << "Flix plugin loaded" << endl;
 	}
@@ -88,7 +89,7 @@ public:
 
 		applyMotorForces();
 		publishTopics();
-		logData();
+		loopLog();
 		syncParameters();
 	}
 

gazebo/wifi.h

@@ -14,6 +14,7 @@
 // Mocks
 int wifiMode = 1;
 int wifiLongRange = 0;
+int wifiBroadcast = 0;
 int espnowChannel = 6;
 const int W_DISABLED = 0, W_AP = 1, W_STA = 2, W_ESPNOW = 3;
 

tools/csv_to_mcap.py

@@ -9,6 +9,7 @@ Usage:
 import csv
 import json
 import docopt
+import math
 from mcap.writer import Writer
 
 args = docopt.docopt(__doc__)
@@ -39,7 +40,15 @@ channel_id = writer.register_channel(
 )
 
 for row in csv_reader:
-    data = {key: float(value) for key, value in zip(header, row)}
+    if row[0] == '': continue
+    data = {}
+    for key, value in zip(header, row):
+        if value == '' or math.isnan(float(value)):
+            data[key] = None
+        else:
+            data[key] = float(value)
+
+    data = {key: float(value) if value != '' else None for key, value in zip(header, row)}
     timestamp = round(float(row[0]) * 1e9)
     writer.add_message(channel_id=channel_id, log_time=timestamp, data=json.dumps(data).encode(), publish_time=timestamp,)
 

tools/log_to_csv.py

@@ -0,0 +1,76 @@
+#!/usr/bin/env python3
+
+"""Convert flight from Flix format to CSV
+
+Usage:
+    log_to_csv.py <input_file>
+"""
+
+import os
+from pyflix import Flix
+import docopt
+import struct
+import csv
+
+DIR = os.path.dirname(os.path.realpath(__file__))
+HEADER_FILE = os.path.join(DIR, 'log/log_header.txt')
+
+# Read log header
+try:
+    # read from file
+    header = open(HEADER_FILE, 'r').read()
+except FileNotFoundError:
+    flix = Flix()
+    header = flix.cli('log header')  # receive the log schema
+    open(HEADER_FILE, 'w').write(header)  # save to file
+
+# Parse log header
+topics = []
+for line in header.splitlines():
+    if not line.startswith('  '):
+        topics.append([])
+    elif 'not logged' not in line:
+        topics[-1].append(line.strip())
+
+# Read log file
+args = docopt.docopt(__doc__)
+input_file = args['<input_file>']
+outfile_file = input_file + '.csv'
+data = open(input_file, 'rb').read()
+
+# Search for sync marker
+SYNC_MARKER = bytes.fromhex('1A 91 4F F6 7F')
+sync_offset = data.find(SYNC_MARKER)
+if sync_offset == -1:
+    raise ValueError('Sync marker not found in log file')
+data = data[sync_offset + len(SYNC_MARKER):]
+data = data.replace(SYNC_MARKER, b'')  # remove all other sync markers
+
+header_row = [f'{value}' for topic in topics for value in topic]
+rows = []
+
+offset = 0
+while offset < len(data):
+    try:
+        topic = struct.unpack_from('B', data, offset)[0]
+        offset += 1
+
+        if topic >= len(topics):
+            raise ValueError(f'Invalid topic {topic} at offset {offset}')
+
+        if topic == 0 or not rows:
+            rows.append({})
+
+        for name in topics[topic]:
+            value = struct.unpack_from('<f', data, offset)[0]
+            offset += 4
+            rows[-1][name] = value
+    except struct.error as e:
+        break
+
+# Write CSV file
+with open(outfile_file, 'w', newline='') as f:
+    writer = csv.DictWriter(f, fieldnames=header_row, extrasaction='ignore')
+    writer.writeheader()
+    rows = filter(lambda row: float(row.get('t', 0)), rows)
+    writer.writerows(rows)

tools/pyflix/flix.py

@@ -243,7 +243,7 @@ class Flix:
             time.sleep(1)
 
     @staticmethod
-    def _mavlink_to_flu(v: List[float]) -> List[float]:
+    def _mavlink_to_flu(v: Sequence[float]) -> List[float]:
         if len(v) == 3:  # vector
             return [v[0], -v[1], -v[2]]
         elif len(v) == 4:  # quaternion
@@ -252,8 +252,8 @@ class Flix:
             raise ValueError(f'List must have 3 (vector) or 4 (quaternion) elements')
 
     @staticmethod
-    def _flu_to_mavlink(v: List[float]) -> List[float]:
-        return Flix._mavlink_to_flu(v)
+    def _flu_to_mavlink(v: Sequence[float]) -> List[float]:
+        return Flix._mavlink_to_flu(v)  # flu to mavlink is the same as mavlink to flu
 
     def _command_send(self, command: int, params: Sequence[float]):
         if len(params) != 7:
@@ -320,13 +320,13 @@ class Flix:
     def set_armed(self, armed: bool):
         self._command_send(mavlink.MAV_CMD_COMPONENT_ARM_DISARM, (1 if armed else 0, 0, 0, 0, 0, 0, 0))
 
-    def set_position(self, position: List[float], yaw: Optional[float] = None, wait: bool = False, tolerance: float = 0.1):
+    def set_position(self, position: Sequence[float], yaw: Optional[float] = None, wait: bool = False, tolerance: float = 0.1):
         raise NotImplementedError('Position control is not implemented yet')
 
-    def set_velocity(self, velocity: List[float], yaw: Optional[float] = None):
+    def set_velocity(self, velocity: Sequence[float], yaw: Optional[float] = None):
         raise NotImplementedError('Velocity control is not implemented yet')
 
-    def set_attitude(self, attitude: List[float], thrust: float):
+    def set_attitude(self, attitude: Sequence[float], thrust: float, rates_extra: Sequence[float] = (0, 0, 0)):
         if len(attitude) == 3:
             attitude = Quaternion([attitude[0], attitude[1], attitude[2]]).q  # type: ignore
         elif len(attitude) != 4:
@@ -334,12 +334,13 @@ class Flix:
         if not (0 <= thrust <= 1):
             raise ValueError('Thrust must be in range [0, 1]')
         attitude = self._flu_to_mavlink(attitude)
+        rates_extra = self._flu_to_mavlink(rates_extra)
         for _ in range(2): # duplicate to ensure delivery
             self.mavlink.set_attitude_target_send(0, self.system_id, 0, 0,
                 [attitude[0], attitude[1], attitude[2], attitude[3]],
-                0, 0, 0, thrust)
+                rates_extra[0], rates_extra[1], rates_extra[2], thrust)
 
-    def set_rates(self, rates: List[float], thrust: float):
+    def set_rates(self, rates: Sequence[float], thrust: float):
         if len(rates) != 3:
             raise ValueError('Rates must be [roll_rate, pitch_rate, yaw_rate]')
         if not (0 <= thrust <= 1):
@@ -351,7 +352,7 @@ class Flix:
                 [1, 0, 0, 0],
                 rates[0], rates[1], rates[2], thrust)
 
-    def set_motors(self, motors: List[float]):
+    def set_motors(self, motors: Sequence[float]):
         if len(motors) != 4:
             raise ValueError('motors must have 4 values')
         if not all(0 <= m <= 1 for m in motors):