aleks/flix
1
0
Fork 0
mirror of https://github.com/okalachev/flix.git synced 2026-09-06 00:10:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
599 Commits 28 Branches 5 Tags
38925d788553c41da454736f47b1606a419bd109
Commit Graph
323 Commits
Author SHA1 Message Date
Oleg Kalachev 5c81181221 Add threshold for rc sticks move for quitting auto mode 2026-08-02 01:58:16 +03:00
Oleg Kalachev 1ae85ff118 Add argument to motor testing commands for specifying thrust 2026-07-02 22:22:33 +03:00
Oleg Kalachev 26a0dd65be Minor fixes and updates 2026-06-30 12:19:29 +03:00
Oleg Kalachev 9d439afd80 Store only changed parameters in flash instead of all 
Rationale:
1. Parameters NVS storage is limited and storing unchanged parameters is wasteful.
2. This allows changing parameters in the code without having to erase the flash storage.
3. Updating the firmware version may change the parameter defaults.
 2026-06-28 17:21:07 +03:00
Oleg Kalachev 64b21a3a6b Show default parameter values in p command output 
Also move float comparing logic to a distinct util function.
 2026-06-24 06:42:09 +03:00
Oleg Kalachev 518abf1555 Simplify rc code 
Utilize the new method for getting channel values.
 2026-06-14 04:45:42 +03:00
Oleg Kalachev 52b74afba6 Bring back espnow tx buffering keeping resends disabled 
Buffering is needed for sending large prints, otherwise the espnow internal buffer overflows.
Make onSent always think there was success send, so there won't be any resends.
Print lost espnow packets count on wifi console command.
 2026-06-09 03:23:30 +03:00
Oleg Kalachev 0ca2473655 Make each mavlink message rate configured separately 
Add parameters:
* MAV_RATE_ATT - ATTITUDE_QUATERNION rate.
* MAV_RATE_RC - RC_CHANNELS_RAW rate.
* MAV_RATE_MOT - ACTUATOR_CONTROL_TARGET rate.
* MAV_RATE_IMU - SCALED_IMU rate.
 2026-06-09 02:59:10 +03:00
Oleg Kalachev b4c2fe3988 Print total RAM in sys command 2026-06-09 02:49:39 +03:00
Oleg Kalachev e51b47b798 Add command for setting the wifi mode easier 2026-06-09 02:44:09 +03:00
Oleg Kalachev 71abe1bcdb Minor changes 
Simplify the code, print imu temperature
 2026-06-09 02:25:20 +03:00
Oleg Kalachev 0f2e384ce6 Don't apply level correction on idle thrust 2026-06-09 02:12:27 +03:00
Oleg Kalachev 1fafc27b39 Make it possible to unassign motor pin using -1 parameter value 2026-05-30 16:57:27 +03:00
Oleg Kalachev faca48ced3 Replace ps and psq commands with st command + minor changes 
Re-arrange commands order.
Make command parser consider \r in addition to \n.
 2026-05-30 16:51:15 +03:00
Oleg Kalachev 59f9528d34 Increase buffer for print, make sys output more correct 
usStackHighWaterMark is not stack size, it's the minimum stack size
 2026-05-30 11:11:35 +03:00
Oleg Kalachev b83c9b3845 Consider mavlink connected only when the gcs message is parsed 2026-05-28 18:41:34 +03:00
Oleg Kalachev 2f4b1423e6 Typo and minor code style changes 2026-05-28 18:39:44 +03:00
Oleg Kalachev a294883dea Make p command show all parameters starting with the arg 2026-05-27 13:58:51 +03:00
Oleg Kalachev cdfba72a0b Fix simulator run 
Add missing extern variables.
Fix warning.
 2026-05-27 11:03:50 +03:00
Oleg Kalachev 91173d06c9 Various minor changes 2026-05-22 08:03:46 +03:00
Oleg KalachevandGitHub fdcc9533b3 Implement ESP-NOW support (#40) 2026-05-21 10:48:31 +03:00
Oleg Kalachev bd2b1bd5de Improve voltage measurement 
Apply PWM_VOLT_PIN without reboot.
Check if the voltage pin can be used with ADC when setting up.
Set voltage to NAN, when it's unknown (including pyflix).
pyflix@0.15.
Don't send BATTERY_STATUS when voltage is unknown.
Add dummy voltage to the simulator.
 2026-05-18 00:30:42 +03:00
Oleg Kalachev 3816ae376f Bring back initializing the lpf with the first input value 
It's much better for voltage measuring and slightly better for gyro bias estimation.
 2026-05-17 06:21:13 +03:00
Oleg Kalachev e53051a349 Fix console command parsing 2026-05-13 06:00:51 +03:00
Oleg Kalachev f8a9f1f838 Remove reboot requirement when changing RC_RX_PIN 2026-05-13 01:27:01 +03:00
Oleg Kalachev dd176180a7 Update help message 
Remove 'welcome to', add copyright and repo link.
 2026-05-12 17:50:28 +03:00
Oleg Kalachev 48c33c7050 Fix and improve wifi subsystem 
Fix a fault when wifi is disabled (udp can't be used without wifi).
Print RSSI and channel in wifi command.
 2026-05-10 22:39:34 +03:00
Oleg Kalachev 35e94f6ea6 Support ESP32-C3 
User Serial1 for rc instead of Serial2, as ESP32-C3 has only 2 Serials.
Add CI build for ESP32-C3.
 2026-05-10 21:07:20 +03:00
Oleg Kalachev 1f48e379e3 Improve the rc calibration code 
More convenient steps order.
Improve the readability a bit.
 2026-05-10 19:05:27 +03:00
Oleg Kalachev b62f2f9427 Rename some wifi parameters for better alphabetical sort 2026-05-09 17:55:55 +03:00
Oleg Kalachev 06e2047097 Make motor testing signal 0.2 instead of full power 
Testing with full power is too dangerous and inconvenient.
 2026-05-08 00:53:19 +03:00
Oleg Kalachev 68271c508c Print firmware build date and time in sys command 2026-05-08 00:31:51 +03:00
Oleg Kalachev 5f1a938d4f Fix imu rotation definition 
The X axis should be pointing to the mounting holes, not pins side.
 2026-05-07 19:54:16 +03:00
Oleg Kalachev bd270db493 Reduce angle drift by adding level correction to the estimator 
Leverage a priori knowledge that the drone's average attitude is level.
Explanation: https://t.me/opensourcequadcopter/158.
 2026-05-05 21:27:47 +03:00
Oleg Kalachev dbf24ea611 Expose lpf alpha of rate pids to parameters 
Add parameters: CTL_R_RATE_D_A, CTL_P_RATE_D_A, CTL_Y_RATE_D_A.
 2026-05-03 15:04:16 +03:00
Oleg Kalachev 9ca6841558 Exit auto mode when sticks moved only when mode switch is not configured 2026-04-29 15:07:44 +03:00
Oleg Kalachev 35ca754583 Fix Vector::rotationVectorBetween implementation for parallel vectors 2026-04-28 15:38:52 +03:00
Oleg Kalachev 2ccda03573 Implement motors output desaturation 
So the drone continues stabilization on max thrust.
 2026-04-28 13:23:42 +03:00
Oleg Kalachev 485a39e740 Disable wi-fi power save to improve responsiveness 2026-04-27 16:46:36 +03:00
Oleg Kalachev d6a79d6c66 Pass acc data in mG in SCALED_IMU to comply with mavlink standard 
https://mavlink.io/en/messages/common.html#SCALED_IMU
pyflix@0.13
 2026-04-24 07:42:39 +03:00
Oleg Kalachev 350a82bfed Minor fix 2026-04-23 15:34:54 +03:00
Oleg Kalachev 6e439859bc Move disabling brown-out code to power subsystem 2026-04-23 15:06:07 +03:00
Oleg Kalachev 835b2243e8 Minor fix in sys command 
String works with printf %s, but actually it's a UB.
 2026-04-23 07:25:59 +03:00
Oleg Kalachev ed4e2d87d1 Fix imu command output 
Gyro field contained filtered gyro instead of scaled only gyro.
 2026-04-23 07:12:25 +03:00
Oleg Kalachev 51cd5fc691 Implement battery voltage monitoring 
Add power subsystem.
Add PWR_VOLT_PIN, PWR_VOLT_SCALE, PWR_VOLT_LPF_A parameters.
Support BATTERY_STATUS mavlink messages streaming.
Add pw cli command.
Add voltage field to pyflix library.
pyflix@0.12.
 2026-04-22 11:35:37 +03:00
Oleg Kalachev c434107eaf Add parameter for configuring sbus pin number, disable sbus by default 2026-03-27 00:56:34 +03:00
Oleg Kalachev a687303062 Make motor parameters apply without reboot 
Add callback to parameter definition to call after parameter is changed.
 2026-02-19 04:56:12 +03:00
Oleg Kalachev b2daf2587f Minor parameters code simplifications 
readOnly is false by default
INFINITY == INFINITY, so remove redundant check
 2026-02-19 02:59:38 +03:00
Oleg Kalachev 3e49d41986 Make rc channel numbers and calibration params use int instead of float 
As parameter subsystems supports int now, and int is much more natural here.
 2026-02-02 20:36:22 +03:00
Oleg Kalachev 67430c7aac Several minor changes 2026-02-02 18:46:36 +03:00