2027514af7
Simplify
...
By default the WiFi channel is used
2026-05-21 02:51:27 +03:00
8e02b65b99
Fix simulator build
2026-05-21 02:03:10 +03:00
b316cc423a
Improve ESP-NOW connection
...
Implement auto-pairing.
Make key optional.
Remove re-sends.
Add command for uploading proxy to makefile.
2026-05-21 00:06:10 +03:00
9ac57b246b
Implement ESP-NOW support
2026-05-18 14:17:13 +03:00
bd2b1bd5de
Improve voltage measurement
...
Apply PWM_VOLT_PIN without reboot.
Check if the voltage pin can be used with ADC when setting up.
Set voltage to NAN, when it's unknown (including pyflix).
pyflix@0.15 .
Don't send BATTERY_STATUS when voltage is unknown.
Add dummy voltage to the simulator.
2026-05-18 00:30:42 +03:00
4530c05b5c
Add Flix 1.5 to builds
2026-05-17 06:46:11 +03:00
3816ae376f
Bring back initializing the lpf with the first input value
...
It's much better for voltage measuring and slightly better for gyro bias estimation.
2026-05-17 06:21:13 +03:00
72a72fde80
Some docs improvements
2026-05-14 21:59:15 +03:00
e53051a349
Fix console command parsing
2026-05-13 06:00:51 +03:00
f8a9f1f838
Remove reboot requirement when changing RC_RX_PIN
2026-05-13 01:27:01 +03:00
76af83fc88
Improve firmware overview article
2026-05-13 00:35:43 +03:00
dd176180a7
Update help message
...
Remove 'welcome to', add copyright and repo link.
2026-05-12 17:50:28 +03:00
48c33c7050
Fix and improve wifi subsystem
...
Fix a fault when wifi is disabled (udp can't be used without wifi).
Print RSSI and channel in wifi command.
2026-05-10 22:39:34 +03:00
35e94f6ea6
Support ESP32-C3
...
User Serial1 for rc instead of Serial2, as ESP32-C3 has only 2 Serials.
Add CI build for ESP32-C3.
2026-05-10 21:07:20 +03:00
1f48e379e3
Improve the rc calibration code
...
More convenient steps order.
Improve the readability a bit.
2026-05-10 19:05:27 +03:00
ee3c6999ab
Add mavlink joystick app usage to the docs
2026-05-10 14:50:27 +03:00
34c6993842
Some fixes in the docs
2026-05-10 02:33:03 +03:00
b62f2f9427
Rename some wifi parameters for better alphabetical sort
2026-05-09 17:55:55 +03:00
7dfef17165
Add Ina Tix' build
...
Co-authored-by: Marina Tikhomirova <Ina.tix@yandex.ru >
2026-05-09 17:49:59 +03:00
8c8046676b
Simplify port definition in Makefile
2026-05-09 17:14:29 +03:00
702ec9792e
Some updates in troubleshooting article
2026-05-09 15:57:25 +03:00
06e2047097
Make motor testing signal 0.2 instead of full power
...
Testing with full power is too dangerous and inconvenient.
2026-05-08 00:53:19 +03:00
87480476c2
Fix motors pwm frequency for esp32s3 etc in the docs
2026-05-08 00:47:29 +03:00
68271c508c
Print firmware build date and time in sys command
2026-05-08 00:31:51 +03:00
e81e84e7fc
Some updates to docs
2026-05-07 20:15:55 +03:00
5f1a938d4f
Fix imu rotation definition
...
The X axis should be pointing to the mounting holes, not pins side.
2026-05-07 19:54:16 +03:00
bd270db493
Reduce angle drift by adding level correction to the estimator
...
Leverage a priori knowledge that the drone's average attitude is level.
Explanation: https://t.me/opensourcequadcopter/158 .
2026-05-05 21:27:47 +03:00
dbf24ea611
Expose lpf alpha of rate pids to parameters
...
Add parameters: CTL_R_RATE_D_A, CTL_P_RATE_D_A, CTL_Y_RATE_D_A.
2026-05-03 15:04:16 +03:00
08683d696d
Some updates in the usage doc
2026-05-01 15:26:59 +03:00
9ca6841558
Exit auto mode when sticks moved only when mode switch is not configured
2026-04-29 15:07:44 +03:00
28da2d3c8e
Fix in pyflix documentation
...
pyflix@0.14
2026-04-28 20:46:49 +03:00
c6632ae6e4
Add info on setting flight modes using rc mode switch
2026-04-28 20:43:52 +03:00
35ca754583
Fix Vector::rotationVectorBetween implementation for parallel vectors
2026-04-28 15:38:52 +03:00
2ccda03573
Implement motors output desaturation
...
So the drone continues stabilization on max thrust.
2026-04-28 13:23:42 +03:00
485a39e740
Disable wi-fi power save to improve responsiveness
2026-04-27 16:46:36 +03:00
9bffe5b52f
Some fixes in docs
2026-04-26 06:05:02 +03:00
d6a79d6c66
Pass acc data in mG in SCALED_IMU to comply with mavlink standard
...
https://mavlink.io/en/messages/common.html#SCALED_IMU
pyflix@0.13
2026-04-24 07:42:39 +03:00
350a82bfed
Minor fix
2026-04-23 15:34:54 +03:00
6e439859bc
Move disabling brown-out code to power subsystem
2026-04-23 15:06:07 +03:00
835b2243e8
Minor fix in sys command
...
String works with printf %s, but actually it's a UB.
2026-04-23 07:25:59 +03:00
ed4e2d87d1
Fix imu command output
...
Gyro field contained filtered gyro instead of scaled only gyro.
2026-04-23 07:12:25 +03:00
51cd5fc691
Implement battery voltage monitoring
...
Add power subsystem.
Add PWR_VOLT_PIN, PWR_VOLT_SCALE, PWR_VOLT_LPF_A parameters.
Support BATTERY_STATUS mavlink messages streaming.
Add pw cli command.
Add voltage field to pyflix library.
pyflix@0.12 .
2026-04-22 11:35:37 +03:00
d8591ea2a9
Fix working with parameters in pyflix examples
...
PITCH_P parameter was renamed to CTL_P_P
2026-04-18 05:23:47 +03:00
c434107eaf
Add parameter for configuring sbus pin number, disable sbus by default
2026-03-27 00:56:34 +03:00
814427dbfd
Minor docs change
2026-03-27 00:40:19 +03:00
0730ceeffa
Add new user builds
2026-02-21 07:12:36 +03:00
a687303062
Make motor parameters apply without reboot
...
Add callback to parameter definition to call after parameter is changed.
2026-02-19 04:56:12 +03:00
b2daf2587f
Minor parameters code simplifications
...
readOnly is false by default
INFINITY == INFINITY, so remove redundant check
2026-02-19 02:59:38 +03:00
a8c25d8ac0
Minor updates to usage article
2026-02-04 17:52:23 +03:00
3e49d41986
Make rc channel numbers and calibration params use int instead of float
...
As parameter subsystems supports int now, and int is much more natural here.
2026-02-02 20:36:22 +03:00
Oleg Kalachev